H-bridge driver for DC brush motor

Overview These H-bridge drivers are full bridge drivers for brush motor applications. Each IC can operate at a wide range of power supply voltages (from 3V to 36V), supporting output currents of up to 2A. MOS transistors in the output stage allow for PWM signal control, while the integrated VREF

36V Max. H-bridge Drivers

ROHM的Ｈ电桥驱动器系列通过不同电源电压 (耐压7V/18V/36V) 与不同输出电流 (Iomax 0.5A/1A/2A) 的组合而形成品种齐全的多个型号产品，适用于各种用途。优化了以往产品中VREF可变功能，在原来应用方式下方便地实现了低功耗化和高效率化。而且，由于内置有充足的保护电路，如温度保护电路 (TSD)、过流保护电路 (OCP)、过压保护电路 (OVP)、防欠压误操作电路 (UVLO) 等，所以在各种不同条件下都可以保护驱动器IC和负载，使整机具有高可靠性。 •低待机电流\n•可以输入PWM控制信号 (20k～100kHz)\n•利用VREF电压设定引脚控制PWM占空比\n•内置有防直通电流电路\n•输出保护电路 (过流/过压/过热/欠压);

DC Brush Motor Drivers (36V max.)

文件：662.74 Kbytes Page：25 Pages

DC Brush Motor Drivers

Overview These H-bridge drivers are full bridge drivers for brush motor applications. Each IC can operate at a wide range of power supply voltages (from 3V to 36V), supporting output currents of up to 2A. MOS transistors in the output stage allow for PWM signal control, while the integrated VREF

封装/外壳：TO-263-8，D²Pak（7 引线+接片），TO-263CA 功能：驱动器 - 全集成，控制和功率级 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC MOTOR DRIVER 6V-32V HRP7 集成电路（IC） 电机驱动器，控制器

DC Brush Motor Drivers (36V max.)

文件：662.74 Kbytes Page：25 Pages

16-32 GHz Low Noise Amplifier

Description Agilent’s AMMC-6231 is a high gain, low-noise amplifier that operates from 16 GHz to 32 GHz. This LNA provides a wide-band solution for system design since it covers several bands, thus, reduces part inventory. The device has input / output match to 50 Ohm, is unconditionally stable a

215MHz, Rail-to-Rail Output, 1.1nV/ root Hz, 3.5mA Op Amp Family

文件：649.98 Kbytes Page：24 Pages

215MHz, Rail-to-Rail Output, 1.1nV/ root Hz, 3.5mA Op Amp Family

文件：649.98 Kbytes Page：24 Pages

215MHz, Rail-to-Rail Output, 1.1nV/ root Hz, 3.5mA Op Amp Family

文件：649.98 Kbytes Page：24 Pages

10g Dual Axis Micromachined Accelerometer

文件：357.62 Kbytes Page：8 Pages