H-bridge drivers (7V max.)

文件：390.07 Kbytes Page：17 Pages

36V 1 Channel (1A/2A/3A) DC Brushed Motor Driver

Description This Evaluation Board was developed for ROHM’s family of DC Brushed Motor Driver: BD62130AEFJ (3A), BD62120AEFJ (2A) and BD62110AEFJ (1A). BD621x0AEFJ are built-in 1 channel H bridge motor drivers for DC brushed motors. This family of driver can drive high efficiency by a PWM signa

36V 1 Channel (1A/2A/3A) DC Brushed Motor Driver

Description This Evaluation Board was developed for ROHM’s family of DC Brushed Motor Driver: BD62130AEFJ (3A), BD62120AEFJ (2A) and BD62110AEFJ (1A). BD621x0AEFJ are built-in 1 channel H bridge motor drivers for DC brushed motors. This family of driver can drive high efficiency by a PWM signa

36V耐压 1ch 有刷电机驱动器系列

BD62110JEFJ是一款可驱动直流有刷电机的H桥单电路电机驱动器。该产品通过直接PWM驱动可实现高效驱动，还内置有各种保护电路，有助于提高应用产品的可靠性。 • Single Power Supply Input (rated voltage of 36V)\n• Rated Output Current (peak) :1.0A (2.0A)\n• Low ON-Resistance DMOS Output\n• Forward, Reverse, Brake, Open\n• External PWM Control\n• Driver for DC Brush Motor\n• Built-in logic input pull-down resistor\n• Cross-conduction Prevention Circuit\n• T;

7V Max. H-bridge Drivers

ROHM的Ｈ电桥驱动器系列通过不同电源电压 (耐压7V/18V/36V) 与不同输出电流 (Iomax 0.5A/1A/2A) 的组合而形成品种齐全的多个型号产品，适用于各种用途。优化了以往产品中VREF可变功能，在原来应用方式下方便地实现了低功耗化和高效率化。而且，由于内置有充足的保护电路，如温度保护电路 (TSD)、过流保护电路 (OCP)、过压保护电路 (OVP)、防欠压误操作电路 (UVLO) 等，所以在各种不同条件下都可以保护驱动器IC和负载，使整机具有高可靠性。 •低待机电流\n•可以输入PWM控制信号 (20k～100kHz)\n•利用VREF电压设定引脚控制PWM占空比\n•内置有防直通电流电路\n•输出保护电路 (过流/过压/过热/欠压);

H-bridge driver for DC brush motor

Overview These H-bridge drivers are full bridge drivers for brush motor applications. Each IC can operate at a wide range of power supply voltages (from 3V to 36V), supporting output currents of up to 2A. MOS transistors in the output stage allow for PWM signal control, while the integrated VREF

DC Brush Motor Drivers

Overview These H-bridge drivers are full bridge drivers for brush motor applications. Each IC can operate at a wide range of power supply voltages (from 3V to 36V), supporting output currents of up to 2A. MOS transistors in the output stage allow for PWM signal control, while the integrated VREF

H-bridge driver for DC brush motor

Overview These H-bridge drivers are full bridge drivers for brush motor applications. Each IC can operate at a wide range of power supply voltages (from 3V to 36V), supporting output currents of up to 2A. MOS transistors in the output stage allow for PWM signal control, while the integrated VREF

7V Max. H-bridge Drivers

ROHM的Ｈ电桥驱动器系列通过不同电源电压 (耐压7V/18V/36V) 与不同输出电流 (Iomax 0.5A/1A/2A) 的组合而形成品种齐全的多个型号产品，适用于各种用途。优化了以往产品中VREF可变功能，在原来应用方式下方便地实现了低功耗化和高效率化。而且，由于内置有充足的保护电路，如温度保护电路 (TSD)、过流保护电路 (OCP)、过压保护电路 (OVP)、防欠压误操作电路 (UVLO) 等，所以在各种不同条件下都可以保护驱动器IC和负载，使整机具有高可靠性。 •低待机电流\n•可以输入PWM控制信号 (20k～100kHz)\n•利用VREF电压设定引脚控制PWM占空比\n•内置有防直通电流电路\n•输出保护电路 (过流/过压/过热/欠压);

DC Brush Motor Drivers

Overview These H-bridge drivers are full bridge drivers for brush motor applications. Each IC can operate at a wide range of power supply voltages (from 3V to 36V), supporting output currents of up to 2A. MOS transistors in the output stage allow for PWM signal control, while the integrated VREF

DC Brush Motor Drivers

文件：938.93 Kbytes Page：19 Pages

DC Brush Motor Drivers

文件：938.93 Kbytes Page：19 Pages

功能：电机控制器/驱动器 包装：盒 描述：EVAL BOARD FOR BD62110A 开发板，套件，编程器 评估和演示板及套件

H-bridge drivers (7V max.)

文件：390.07 Kbytes Page：17 Pages

DC Brush Motor Drivers (7V max.)

文件：611.02 Kbytes Page：21 Pages

DC Brush Motor Drivers (7V max.)

文件：611.02 Kbytes Page：21 Pages

封装/外壳：8-SOIC（0.173"，4.40mm 宽） 功能：驱动器 - 全集成，控制和功率级 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC MOTOR DRIVER 3V-5.5V 8SOP 集成电路（IC） 电机驱动器，控制器

DC Brush Motor Drivers (7V max.)

文件：611.02 Kbytes Page：21 Pages

H-bridge drivers (7V max.)

文件：390.07 Kbytes Page：17 Pages

DC Brush Motor Drivers (7V max.)

文件：611.02 Kbytes Page：21 Pages

Crusoe??Processor Core-Voltage Regulator

Crusoe™ Processor Core-Voltage Regulator The ISL6211 is a single-output power-controller to power core of Transmeta’s Crusoe™ CPU. The ISL6211 includes a 5-bit digital-to-analog converter (DAC) that adjusts the core PWM output voltage from 0.6VDC to 1.75VDC. The DAC settings may be changed during

Crusoe??Processor Core-Voltage Regulator

Crusoe™ Processor Core-Voltage Regulator The ISL6211 is a single-output power-controller to power core of Transmeta’s Crusoe™ CPU. The ISL6211 includes a 5-bit digital-to-analog converter (DAC) that adjusts the core PWM output voltage from 0.6VDC to 1.75VDC. The DAC settings may be changed during

Crusoe??Processor Core-Voltage Regulator

Crusoe™ Processor Core-Voltage Regulator The ISL6211 is a single-output power-controller to power core of Transmeta’s Crusoe™ CPU. The ISL6211 includes a 5-bit digital-to-analog converter (DAC) that adjusts the core PWM output voltage from 0.6VDC to 1.75VDC. The DAC settings may be changed during

Silicon NPN epitaxial planer transistor

Silicon NPN epitaxial planer transistor For digital circuits ■ Features ● Costs can be reduced through downsizing of the equipment and reduction of the number of parts. ● MT-1 type package, allowing supply with the radial taping.

Silicon NPN epitaxial planer transistor

Silicon NPN epitaxial planar type ​​​​​​​ For switching/digital circuits ■ Features • Two elements incorporated into one package (Transistors with built-in resistor) • Reduction of the mounting area and assembly cost by one half