Free Delay Time Setting CMOS Voltage Detector IC Series

Description ROHM’s BD52□□G/FVE and BD53□□G/FVE series are highly accurate, low current consumption reset IC series with a built-in delay circuit. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V,

16-Channel, 16/14-Bit, Serial Input, Voltage-Output DAC

GENERAL DESCRIPTION The AD5360/AD5361 contains 16, 16/14-bit DACs in a single, 56-lead, LFCSP or 52-lead LQFP package. It provides buffered voltage outputs with a span 4 times the reference voltage. The gain and offset of each DAC can be independently trimmed to remove errors. For even greater

Dual 900MHz Balanced Mixer with Low Side LO Buffer, IF Amp, and RF Balun

GENERAL DESCRIPTION The ADL5360 utilizes two highly linear doubly balanced passive mixer cores along with integrated RF and LO balancing circuitry to enable single-ended operation. The ADL5360 incorporates two RF baluns allowing for optimal main and diversity mixer performance over a 700 to 1000

SMD Grabber Test Clip

文件：34.93 Kbytes Page：1 Pages

T-1 Right Angle 4 Wide LED Assembly

文件：99.84 Kbytes Page：1 Pages

5U 20-Slot Rackmount Chassis with 6 Hot-Swap SAS/SATA HDD Trays and Redundant Power Supply

文件：2.47462 Mbytes Page：2 Pages