丝印代码：DP；Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

丝印代码：DP；Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

丝印代码：DP；Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

丝印代码：DP；Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

丝印代码：DP；Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

丝印代码：DP；High accuracy detection, Ultra-low current consumption

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

丝印代码：DP；Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

丝印代码：DP；Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

封装/外壳：SC-74A，SOT-753 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC SUPERVISOR 1 CHANNEL 5SSOP 集成电路（IC） 监控器

丝印代码：DP；Standard CMOS Standard CMOS

文件：507.55 Kbytes Page：18 Pages

Electronic Dimming Ballast Controller

GENERAL DESCRIPTION The ML4833 is a complete solution for a dimmable or a non-dimmable, high power factor, high efficiency electronic ballast. The BiCMOS ML4833 contains controllers for “boost” type power factor correction as well as for a dimming ballast. The ML4833 was designed to minimize the

Electronic Dimming Ballast Controller

GENERAL DESCRIPTION The ML4833 is a complete solution for a dimmable or a non-dimmable, high power factor, high efficiency electronic ballast. The BiCMOS ML4833 contains controllers for “boost” type power factor correction as well as for a dimming ballast. The ML4833 was designed to minimize the

Photo Modules for PCM Remote Control Systems

DESCRIPTION The TSOP22.., TSOP48.., TSOP24.. and TSOP44.. series are miniaturized IR receiver modules for infrared remote control systems. A PIN diode and a preamplifier are assembled on lead frame, the epoxy package contains an IR filter. The demodulated output signal can be directly connected

POWER ZENERS

POWER ZENERS 5 Watt, Industrial

P-Channel 30-V (D-S) MOSFET with Schottky Diode

文件：63.26 Kbytes Page：5 Pages