2.4GHz BLE Beacon 收发器

蓝牙Beacon 技术采用BLE 的Advertising功能， 支持室内导航、健康医疗、BLEAdvertising、传感、安防、遥控器、灯控等新型应用。Advertising 数据包放置在通道37、38 和39 中， 避免了WiFi 通道在ISM 频段的干扰。BC7262 适用于各种接近感应应用的Beacon 设备。BC7262 是一款低成本的2.4GHz BLE Beacon收发器。只需外接一个32MHz 晶振(XO)、一个MCU 和几个陶瓷电容即可构建一个完整的Beacon 设备。可根据应用需求设置从-10dBm 到+5dBm 不同等级的输出功率。即使是小封装的10-pin SOP-E • 支持 GFSK 调制 (BT=0.5)，数据速率为1Mbps，符合BLE 标准\n• 工作电压范围：1.9V~3.6V\n• 低电流损耗\n• ♦ RX电流损耗：18.5mA\n• 兼容 FCC/ETSI\n• 封装类型：10-pin SOP-EP;

T-1 Subminiature Lamps

T-1 Subminiature Lamps T-1 Subminiature Short Type Lamps

DUAL CMOS LDO

General Description Dual 125mA CMOS LDO in an SO-8 package. This part offers 120mV dropout voltage on each output at 100mA typical (5V part), and nearly zero dropout below 5mA. Each output is independently short-circuit protected. Features • All-CMOS design in an 8-lead SOIC package • ±2 preci

6 GHz, 750 W CW, CONDUCTION COOLING, HIGH POWER GAIN

GENERAL DESCRIPTION The NEC LD7262 series of PPM focused traveling wave tubes are designed for final amplifier in the earth-tosatellite communications transmitter. These are capable of delivering an output power of 750 W over the range of 5.85 to 6.45 GHZ and an output power of 700 W over the ra

LOW SPEED USB 8-BIT MCU WITH 3 ENDPOINTS, FLASH OR ROM MEMORY, LVD, WDG, 10-BIT ADC, 2 TIMERS, SCI, SPI

INTRODUCTION The ST7262 and ST72F62 devices are members of the ST7 microcontroller family designed for USB applications. All devices are based on a common industry standard 8-bit core, featuring an enhanced instruction set. The ST7262 devices are ROM versions. The ST72F62 versions feature dual

DC MOTOR DRIVER (3 PHASE Bi-DIRECTIONAL)

DC MOTOR DRIVER (3 PHASE Bi-DRIECTIONAL)