Reversible motor driver

●Description The reversible motor driver for output 1.0A for 1 motor can set the output modes to fourmodes, normal, reverse, stop (idling), and braking in accordance with logic input (2 inputs). ●Features 1) Built-in surge absorption diode 2) By built-in power save circuit, curre

输出1.0A 一个电机用可反转电机驱动器

输出1A、一个电机用可反转电机驱动器。通过输出电压调整功能可设定电机的转速。通过输入逻辑(2 输入)可设置正转、反转、停止(空转)、制动等4种模式的输出。 • Built-in surge absorption diode\n• By built-in power save circuit, current consumption when a motor stops (idles) can be suppressed\n• Output voltage can be optionally set by reference voltage setting pin\n• Built-in thermal shutdown circuit (TSD);

Reversible motor drivers (1A series)

文件：377.37 Kbytes Page：16 Pages

1.0A Reversible Motor Drivers (Single Motor)

文件：325.71 Kbytes Page：18 Pages

Reversible Motor Driver

文件：286.86 Kbytes Page：5 Pages

1.0A Reversible Motor Drivers (Single Motor)

文件：335.8 Kbytes Page：18 Pages

1.0A Reversible Motor Drivers (Single Motor)

●Description The reversible motor driver for output 1.0A for 1 motor can set the output modes to fourmodes, normal, reverse, stop (idling), and braking in accordance with logic input (2 inputs). ●Features 1) Built-in surge absorption diode 2) By built-in power save circuit, curre

Reversible Motor Driver

文件：286.86 Kbytes Page：5 Pages

封装/外壳：16-LSOP（0.173"，4.40mm 宽） 功能：驱动器 - 全集成，控制和功率级 包装：管件 描述：IC MOTOR DRIVER 4.5V-15V 16SSOPA 集成电路（IC） 电机驱动器，控制器

3 CHANNELS MULTIPOWER SYSTEM

DESCRIPTION This Combo Motor Driver uses large scale integration to incorporate several functions into the same chip. 1) Two unipolar stepper motor driver 2) A full bridge DC motor driver 3) Serial microprocesor interface The power output stages are DMOS and the input can be interface

3 CHANNELS MULTIPOWER SYSTEM

DESCRIPTION This Combo Motor Driver uses large scale integration to incorporate several functions into the same chip. 1) Two unipolar stepper motor driver 2) A full bridge DC motor driver 3) Serial microprocesor interface The power output stages are DMOS and the input can be interface

DARLINGTON 20 AMPERE COMPLEMENTARY SILICON POWER TRANSISTORS 60, 80, 100 VOLTS 160 WATTS

Darlington Complementary Silicon Power Transistors . . . designed for general–purpose amplifier and low–speed switching motor control applications. • Similar to the Popular NPN 2N6282, 2N6283, 2N6284 and the PNP 2N6285, 2N6286, 2N6287 • Rugged RBSOA Characteristics • Monolithic

8-BIT OTP/EPROM MCU WITH LCD DRIVER, EEPROM AND A/D CONVERTER

GENERAL DESCRIPTION INTRODUCTION The ST62T85B and ST62E85B devices are low cost members of the ST62xx 8-bit HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach: a common core is surrounded by a nu

REAL TIME EMULATION DEVELOPMENT TOOLS FOR ST6 MCU FAMILY

GENERAL DESCRIPTION The ST6 Real Time Development System is an advanced hardware development system designed and configured to provide comprehensive support for the ST6 family of MCUs. HARDWARE FEATURES ■ Supports ST62 and ST63 family ■ Real time emulation ■ 32 KBytes of emulation memory ■ B