 GENERAL DESCRIPTION

The AX2596S series are monolithic IC designed for a step down DC/DC converter, and own the ability of driving a 2A load without additional transistor. It saves board space. The external shutdown function can be controlled by logic level and then come into standby mode. The internal compensation makes feedback control having good line and load regulation without external design. Regarding protected function, thermal shutdown is to prevent over temp erature operating from damage, and current limit is against over current operating of the output switch. If current limit function occurs and VFB is down below 0.5V, the switching frequency will be reduced.

The AX2596S series operates at a switching f requency of 150KHz thus allow smaller sized filter components than what would be needed with lower frequency switching regulators. The output version included fixed 3.3V, 5V, and an adjustable type. The chips are available in standard 8-lead SOP, SOP-8L with Exposed pad packages.

 FEATURES

- Output voltage: 3.3V, 5V and adjustable output version 1.

- Adjustable version output voltage range, 1.23V to 38.5V.

- 150KHz fixed switching frequency.

- Voltage mode non synchronous PWM control.

- Thermal shutdown and current li mit protection.

- ON/OFF shutdown control input.

- Short Circuit Protect (SCP).

- Operating voltage can be up to 40V.

- Output load current: 2A.

- SOP-8L, SOP-8L-EP Pb-Free packages.

- Low power standby mode.

- Built in switching transistor on chip.

- RoHS and Halogen fre e compliance.