Description

The feature packed Arduino® Nano RP2040 Connect brings the new Raspberry Pi RP2040 microcontroller to theNano form factor. Make the most of the dual core 32-bit Arm® Cortex®-M0+ to make Internet of Things projects with Bluetooth® and Wi-Fi connectivity thanks to the u-blox® Nina W102 module. Dive into real-world projects with the onboard accelerometer, gyroscope, RGB LED and microphone. Develop robust embedded AI solutions with minimal effort using the Nano RP2040 Connect!

Features

Raspberry Pi RP2040 Microcontroller

133 MHz 32bit Dual Core Arm® Cortex®-M0+

264 kB on-chip SRAM

Direct Memory Access (DMA) controller

Support for up to 16 MB of off-chip Flash memory via dedicated QSPI bus

USB 1.1 controller and PHY, with host and device support

8 PIO state machines

Programmable IO (PIO) for extended peripheral support

4 channel ADC with internal temperature sensor, 0.5 MSa/s, 12-bit conversion

SWD Debugging

2 on-chip PLLs to generate USB and core clock

40nm process node

Multiple low power mode support

USB 1.1 Host/Device

Internal Voltage Regulator to supply the core voltage

Advanced High-performance Bus (AHB)/Advanced Peripheral Bus (APB)

U-blox® Nina W102 Wi-Fi®/Bluetooth® Module

240 MHz 32bit Dual Core Xtensa LX6

520 kB on-chip SRAM

448 Kbyte ROM for booting and core functions

16 Mbit FLASH for code storage including hardware encryption to protect programs and data

1 kbit EFUSE (non- erasable memory) for MAC addresses, module configuration, Flash-Encryption, and

Chip-ID

IEEE 802.11b/g/n single-band 2.4 GHz Wi-Fi® operation

Bluetooth® 4.2

Integrated Planar Inverted-F Antenna (PIFA)

4x 12-bit ADC

3x I2C, SDIO, CAN, QSPI

Memory

AT25SF128A 16 MB NOR Flash

QSPI data transfer rate up to 532Mbps

100K program/erase cycles

ST LSM6DSOXTR 6-axis IMU

3D Gyroscope

±2/±4/±8/±16 g full scale

3D Accelerometer

±125/±250/±500/±1000/±2000 dps full scale

Advanced pedometer, step detector and step counter

Significant Motion Detection, Tilt detection

Standard interrupts: free-fall, wake-up, 6D/4D orientation, click and double-click

Programmable finite state machine: accelerometer, gyroscope and external sensors

Machine Learning Core

Embedded temperature sensor

ST MP34DT06JTR MEMS Microphone

AOP = 122.5 dBSPL

64 dB signal-to-noise ratio

Omnidirectional sensitivity

-26 dBFS ± 1 dB sensitivity

RGB LED

Common Anode

Connected to u-blox® Nina W102 GPIO

Microchip® ATECC608A Crypto

Cryptographic Co-Processor with Secure Hardware-Based Key Storage

I2C, SWI

Hardware Support for Symmetric Algorithms:

SHA-256 & HMAC Hash including off-chip context save/restore

AES-128: Encrypt/Decrypt, Galois Field Multiply for GCM

Internal High-Quality NIST SP 800-90A/B/C Random Number Generator (RNG)

Secure Boot Support:

Full ECDSA code signature validation, optional stored digest/signature

Optional communication key disablement prior to secure boot

Encryption/Authentication for messages to prevent on-board attacks

I/O

14x Digital Pin

8x Analog Pin

Micro USB

UART, SPI, I2C Support

Power

Buck step-down converter

Safety Information

Class A