Description

Arduino® Nano Every is a miniature sized module containing an ATMega4809 AVR processor and an ATSAMD11D14A Arm® Cortex®-

M0+ processor to act as a bridge between USB and the main AVR processor. The module can either be mounted as a DIP component

(when mounting pin headers), or as a SMT component, directly soldering it via the castellated pads.

Features

ATMega4809

Processor

AVR CPU at up to 20 MHz

48 kB Flash

6 kB SRAM

256B EEPROM

Power On Reset (POR) and Brown Out Detection (BOD)

Peripherals

1x 16-bit Timer/Counter with a dedicated period register and 3x compare channels

4x 16-bit Timer/Counter with input capture

1x 16-bit Real-Time Counter (RTC) running from an external crystal or an internal RC oscillator

4x USART with fractional baud rate generator, auto-baud, and start-of-frame detection

1x Master/slave Serial Peripheral Interface (SPI)

1x Dual mode Master/Slave TWI with dual address match 6x 16 bit Timers (1 dedicated to RTC)

Event System for CPU independent and predictable inter-peripheral signaling

Configurable Custom Logic (CCL) with up to four programmable Look-up Tables (LUT)

1x Analog Comparator (AC) with a scalable reference input

Watchdog Timer with Window mode, with separate on-chip oscillator

External interrupt on all general purpose pins

ATSAMD11D14A

Processor

Arm® Cortex®-M0+ at up to 48 MHz

16KB Flash

4KB SRAM

Power On Reset (POR) and Brown Out Detection (BOD)

One full-speed (12Mbps) Universal Serial Bus (USB) 2.0 interface

Embedded device function

Eight endpoints

Standard firmware for USB-UART bridge

Can be reprogrammed for other USB classes

UART connection to ATMega4809

Field upgradeable through USB Bootloader

MPM3610 (DC-DC)

Regulates input voltage from up to 21V with a minimum of 65% efficiency @minimum load

More than 85% efficiency @12V

AP2112K-3,3 (LDO)

Regulates input voltage from 5V to 3.3V

Up to 550mA output current for user application (recommended max 200mA)