General Description

The AOZ2339CQI-01 is an I2C controllable, high

efficiency, easy-to-use DC-DC synchronous buck

regulator capable of operation from a 6.5V to 26V input

bus. Ability to control the output voltage using the I2C bus

simplifies converter design for microprocessors or SoCs

that require dynamic voltage scaling or voltage

margining. The device is capable of supplying 30A of

continuous output current with an output voltage

adjustable from 0.6V to 1.790625V (±2.0).

The AOZ2339CQI-01 integrates an internal linear

regulator to generate 5.7V VCC from input. If input

voltage is lower than 5.7V, the linear regulator operates

at low drop output mode, then VCC voltage is equal to

input voltage minus the drop-output voltage of the

internal linear regulator.

A proprietary constant on-time PWM control with input

feed-forward results in ultra-fast transient response while

maintaining relatively constant switching frequency over

the entire input voltage range.

The device features multiple protection functions such as

VCC under-voltage lockout, cycle-by-cycle current limit,

output over-voltage protection, short-circuit protection,

and thermal shutdown.

The AOZ2339CQI-01 is available in a 5mm×5mm QFN-

28L package and is rated over a -40°C to +85°C ambient

temperature range.

Features

 Wide input voltage range

– 6.5V to 26V

 30A continuous output current

 Output voltage adjustable from 0.6V to 1.790625V in

9.375mV

 ±2.0 output voltage accuracy for I2C control

 Low RDS(ON) internal NFETs

– 4m high-side

– 0.8m low-side

 Constant On-Time with input feed-forward

 Selectable PFM Light-Load Operation

 Ceramic capacitor stable

 Power Good output

 I2C address programming

 Integrated bootstrap diode

 Cycle-by-cycle current limit

 Short-circuit protection

 Over voltage protection

 Thermal shutdown

 Thermally enhanced 5mm x 5mm QFN-28L package

Applications

 Portable computers

 Compact desktop PCs

 Servers

 Graphics cards

 Set-top boxes

 LCD TVs

 Cable modems

 Point-of-load DC/DC converters

 Telecom/Networking/Datacom equipment