Features

High-speed de-mux (4x6) switching up to 10Gbps

4-lanes DisplayPort outputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, 6.75Gbps, and 8.1Gbps

USB 3.1 signal output (SSTX and SSRX) with Gen1 (5Gbps) and Gen2 (10Gbps) link speed

USB 1.1 Billboard support

DisplayPort Alternate Mode (SlimPort®) communication support through USB-PD structured VDM messaging

Native TCPC-compliant hardware register interface

Integrated VCONN FETs

Built-in 10-bit ADC to monitor VBUS voltage and current

Dedicated control signals for VBUS Source FET, VBUS sink FET, and VBUS auto discharge circuity

Serial and debug interfaces

- Slave interface

Industry standard compatibility

- USB Type-C r1.2 specification

- USB Power Delivery v3.0 r1.0 specification

- DisplayPort 1.4 specification

- DisplayPort Alternate Mode over USB Type-C r1.1 specification

- Universal Serial Bus (USB) Type-C Port Controller Interface r1.0 specification

Low-power design

- Single supply at 3.3V

- Dedicated supply power pin for flexible I/O power – 1.8V or 3.3V

- Ultra-low power consumption (typical 80uW) in standby mode

On-chip Microcontroller (OCM) to implement signal switching, USB-PD messaging, and DisplayPort related functions

- 64K bytes SRAM for firmware execution

- 128K bytes Flash for firmware storage

- PDFU function for firmware updating

Dead battery detection support

Package offered: 48-pin QFN, 6mm x 6mm, 0.90mm Z-height, pin-pitch: 0.4mm

Applications

USB Type-C dongle, docking, HDTV, monitor