Features

 eDP receiver

- Integrated high-speed DP-Rx compliant with DisplayPort standard eDP v1.4b

- Up to 4 lanes @8.1Gbps, 5.4Gbps, 4.32Gbps, 2.7Gbps, 2.16Gbps, 2.43Gbps and 1.62Gbps

- PSR/MBO/PSR2 function

 Source IC interface: CEDS/iSP/EPI/ATPI

- Up to 24 pairs to support 12-channel 2D/1C or 24-channel 1D/1C configuration

- CEDS/iSP/EPI/ATPI transmitter up to 2.0 Gbps configuration with Mux2 support

- Various swap modes: inter-port swap, intra-port swap, p/n swap, RGB swap, odd/even pixel swap, etc.

- Scan direction swap

- Supports Z-inversion (column inversion), and N-line inversion

- Dual gate mode combined with Z-inversion and non-Z inversion mode

- CEDS/iSP/EPI/ATPI test pattern mode

 TCON functions

- Max resolution: 3840x2400 @60Hz

- Can support FullHD 240Hz

- eDP TCON color depth: 18/24/30 bpp input, up to 8+2 FRC output

- Programmable fail-safe mode control

- Configurable BIST pattern

10-bit Gamma correction table for each color

- Advanced Color Block

- Multiple FRC pattern configurations

- 8bit->6bit, 9bit->6bit, 10bit->8bit and 10bit->6bit FRC modes

- 0-D dimming control (DBC) function for backlight low power

- Color-engine for hue and saturation control

- Direct drive G-sync, Free sync, and Adaptive sync

- eDP sDRRS power saving function

- Splash-screen

- In-cell Touch function combined with PSR/ PSR2

 On-chip SSCG

- CEDS/EPI/iSP/ATPI 1.6G ＜Fceds ≤2.06G (Max. +/-0.5% with 0.25% step, 10/20/30/40KHz, center spreading)

- CEDS/EPI/iSP/ATPI Fceds≤1.6G (Max. +/-1% with 0.25% step, 10/20/30/40KHz, center spreading)

 VESA DisplayHDR

- EOTF ST.2084 Decoder

- BT.2020 to sRGB color space mapping

- Tone Mapping (BT.2390-2)

- 10-bit input with 8-bit output

- DPCD handshake

- 1D, 1.5D and 2D local dimming control

- Up to 16x32 segment backlight control with 12-bit intensity

 I2C interface

 In-cell touch support for finger and active pen

 PWM generator, PWM pass-through and PWM product modes

 TSMC 28nm HPC+ process

 Lowest power, 200mW to 280mW @UHD (PSR on/ off)

 Power supply: 1.8V/0.9V (internal 3.3V for HPD)

 Package:

- ANX2187BN-AA-T: BGA144 (5.15x11x1mm), 0.5mm pitch

- ANX2187VN-AA-T: BGA147 (5.15x14x1mm), 0.65mm pitch