FEATURES

► High common-mode transient immunity: 180 kV/μs typical

► High robustness to radiated and conducted noise

► Low propagation delay

► 6.2 ns typical (10 ns maximum) for 5 V operation

► Low dynamic power consumption, <1.65 mA/ch at 1 Mbps

► 2.25 V to 5.5 V level translation

► 150 Mbps maximum guaranteed data rate for 5 V operation

► High temperature operation: 125°C

► 16-lead, RoHS compliant, QSOP package

► Safety and regulatory approvals

► UL 1577

► VISO = 3000 VRMS for 1 minute

► DIN EN IEC 60747-17

► VIORM = 636 VPEAK

► IEC/EN/CSA 62368-1

► IEC/CSA 60601-1

► IEC/CSA 61010-1

► CQC GB 4943.1 (pending)

► ±8 kV IEC 61000-4-2 ESD protection across isolation barrier

► ±8 kV HBM ESD protection on input/output pins

► Fail-safe high (N1) or low (N0) options

APPLICATIONS

► Serial-peripheral interface (SPI) data converter isolation

► RS-485 and controller area network with flexible data rate

(CAN FD) industrial field bus isolation

► PWM controller signal isolation

► General-purpose multichannel isolation

GENERAL DESCRIPTION

The ADuM360N/ADuM362N1 are 6-channel digital isolators based

on Analog Devices, Inc., iCoupler® technology. Combining high

speed, complementary metal-oxide semiconductor (CMOS) and

back-to-back monolithic air core transformer technology, these isolation

components provide outstanding performance characteristics

and meet CISPR 32/EN 55032 Class B limits at 5 Mbps. The

maximum propagation delay is 10 ns with a pulse-width distortion of

less than 3 ns at 5 V operation. Channel matching is tight at 3.0 ns

maximum.

The ADuM360N/ADuM362N data channels are independent and

are available in a variety of configurations with a withstand voltage

rating of 3 kV rms (see Figure 20). The devices operate with

the supply voltage on either side ranging from 2.25 V to 5.5 V,

which provides compatibility with lower voltage systems as well as

enabling voltage translation functionality across the isolation barrier.

Two different fail-safe options are available, by which the outputs

transition to a predetermined state when the input power supply is

not applied.