GENERAL DESCRIPTION

The ADuM50001 is an isolated dc-to-dc converter based on the Analog Devices, Inc., iCoupler® technology. The dc-to-dc

converter in this device provides regulated, isolated power in several combinations of input and output voltages as listed in

Table 1. The Analog Devices chip scale transformer, iCoupler technology,

transfers isolated power in this dc-to-dc converter with up to 33 efficiency. The result is a small form factor, total isolation

solution.

Higher output power levels are obtained by using the ADuM5000 to augment the power output of ADuM5401, ADuM5402,

ADuM5403, ADuM5404, ADuM520x, and other ADuM5000 iCouplers with isoPower®.

isoPower uses high frequency switching elements to transfer power

through its transformer. Special care must be taken during printed circuit board (PCB) layout to meet emissions standards. See the

AN-0971 Application Note for board layout recommendations.

FEATURES isoPower integrated, isolated dc-to-dc converter Regulated 3.3 V or 5 V output Up to 500 mW output power

16-lead SOIC package with 7.6 mm creepage

High temperature operation: 105°C maximum

Thermal overload protection

Safety and regulatory approvals

UL recognition 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A VDE certificate of conformity (pending)

IEC 60747-5-2 (VDE 0884, Part 2)

VIORM = 560 V peak

APPLICATIONS

RS-232/RS-422/RS-485 transceivers Industrial field bus isolation

Power supply startups and gate drives Isolated sensor interfaces

Industrial PLCs