8-bit AVR MCU

ATmega1609 is a microcontroller featuring the 8-bit AVR® processor with hardware multiplier - running at up to 20 MHz and with up to 16 KB Flash, 2 KB SRAM and 256 bytes of EEPROM in 48-pin packages. The series uses the latest Core Independent Peripherals with low-power features, including Event Sys • Hardware multiplier\n• Three sleep modes:\n• Idle\n• Standby\n• Power Down\n• Event System\n• Watchdog Timer (WDT)\n• Power-On Reset (POR)\n• Brown-Out Detection (BOD)\n• Single pin programming and debugging interface (UPDI)\n• 16 Channel 10-bit ADC with Voltage Reference\n• Analog Comparator (AC);

ATmega4808/4809 Data Sheet

文件：4.33565 Mbytes Page：560 Pages

Dual Port RAM

DESCRIPTION The DS1609 is a random access 256–byte dual port memory designed to connect two asyncronous address/data buses together with a common memory element. Both ports have unrestricted access to all 256 bytes of memory, and with modest system discipline no arbitration is required. Each port

NPN EPITAXIAL PLANAR TRANSISTOR

Description • Low frequency high voltage amplifier. • Complementary pair with HJ1109.

NPN EPITAXIAL PLANAR TRANSISTOR

Features • Low frequency high voltage amplifier • Complementary pair with HSB1109

Octal SMBus-to-Parallel I/O Expanders

General Description The MAX1608/MAX1609 provide remote input/output (I/O) expansion through an SMBus™ 2-wire serial interface. Each device has eight high-voltage open-drain outputs that double as TTL-level logic inputs, providing continuous bidirectional capabilities. The open-drain outputs

Integrated Circuit Instrumentation Timer

Description: The NTE1609 is a monolithic integrated circuit in a 7–Lead SIP type package consisting of a timer developed for use in measurement instrumentation, control equipment and digital data procesing equipment. This device is designed to require few externally connected components. F