High Speed Digital Switch

ASM1453 is a 2-differential-channel signal switch which is used to mux/demux high speed signals. It support 1:2 or 2:1 multiplexer/demultiplexer switch with low On-Resistance, low crosstalk, operating at 1.8V supply. ASM1453 is designed for SATA II switch application in computers, consumer electroni • SATA II Switch\n• 2 Differential Channel 2:1 Mux/DeMux\n• -3dB Bandwidth: 4GHz\n• Low Crosstalk: -30dB @ 3.0GHz\n• Low Off Isolation: -21dB @ 3.0GHz\n• Low Insertion Loss: -1.8dB @ 3.0GHz\n• VDD operating range: 1.8V+/-5%\n• HBM ESD > 4KV♦Package Type\n• Green Package TQFN 28L (Pb-free);

High Speed Digital Switch

ASM1453B is a 2 differential-channels signal switch which is used to mux or demux high speed signals. It support 1:2 or 2:1 multiplexer or demultiplexer switch, supporting up to 3 Gpbs data transfer bandwitch, with low On Resistance, Low Insertion Loss, operating at 3.3V supply. ASM1453B could be us • 2 differential channel\n• 1:2 or 2:1 Multiplexer/Demultiplexer Switch\n• Support SATA-I & SATA-II interface\n• Up to 3.0 Gbps data transfer bandwitch\n• Low intra pair skew time: maximum 10 ps\n• -3dB Bandwidth: 2.25GHz\n• Low Crosstalk: -30dB @ 1.5 GHz\n• Low Off Isolation: -23dB @ 1.5 GHz\n• Low;

Single PNP-Operational Amplifiers

Single PNP-Operational Amplifiers These operational amplifiers are circuits for universal applications having a PNP-input differential stage and an open collector output. Apart from one resistor, only active components are used. The integrated regulator provides for all parameters a large degree

PNP SILICON POWER TRANSISTOR ARRAY HIGH SPEED SWITCHING USE INDUSTRIAL USE

DESCRIPTION The µPA1453 is PNP silicon epitaxial Power Transistor Array that built in 4 circuits designed for driving solenoid, relay, lamp and so on. FEATURES • Easy mount by 0.1 inch of terminal interval. • High hFE. Low VCE(sat). hFE = 100 to 400 (at IC = –2 A) VCE(sat) = –0.3 V MAX

PNP SILICON POWER TRANSISTOR ARRAY HIGH SPEED SWITCHING USE INDUSTRIAL USE

DESCRIPTION The µPA1453 is PNP silicon epitaxial Power Transistor Array that built in 4 circuits designed for driving solenoid, relay, lamp and so on. FEATURES • Easy mount by 0.1 inch of terminal interval. • High hFE. Low VCE(sat). hFE = 100 to 400 (at IC = –2 A) VCE(sat) = –0.3 V MAX

DUAL PULSE-WIDTH-MODULATION CONTROL CIRCUIT

文件：116.09 Kbytes Page：7 Pages

DUAL PULSE-WIDTH-MODULATION CONTROL CIRCUIT

文件：116.09 Kbytes Page：7 Pages