Air Purification Combo ONE

Key Features & Benefits Calibrated signal outputs in compliance with international standards (PM1.0, PM2.5, PM10, TVOC, eCO2 1, AQI2, temperature and relative humidity). Matchbox-size, fully orchestrated design for space-constrained applications and lowest overall BOM costs. System level

Environmental Sensors

The APC1 is a compact, box-shaped, all-in-one environmental sensor solution to precisely measure particulate matter and aerosols, volatile organic compounds, temperature and humidity. It leverages the most advanced sensor technology to provide an accurate, fully calibrated, maintenance-free solution • Up to 20 calibrated signal outputs (PM1.0, PM2.5, PM10, TVOC, eCO2 , AQI , temperature and relative humidity)\n• Matchbox-size, fully orchestrated design\n• Particle detection down to 0.3µm\n• Superior accuracies over wide temperature and humidity ranges;

Attachment accessories

文件：25.83 Kbytes Page：1 Pages

Air Purification Combo ONE

Key Features & Benefits Calibrated signal outputs in compliance with international standards (PM1.0, PM2.5, PM10, TVOC, eCO2 1, AQI2, temperature and relative humidity). Matchbox-size, fully orchestrated design for space-constrained applications and lowest overall BOM costs. System level

Air Purification Combo ONE

Key Features & Benefits Calibrated signal outputs in compliance with international standards (PM1.0, PM2.5, PM10, TVOC, eCO2 1, AQI2, temperature and relative humidity). Matchbox-size, fully orchestrated design for space-constrained applications and lowest overall BOM costs. System level

Air Purification Combo ONE

Key Features & Benefits Calibrated signal outputs in compliance with international standards (PM1.0, PM2.5, PM10, TVOC, eCO2 1, AQI2, temperature and relative humidity). Matchbox-size, fully orchestrated design for space-constrained applications and lowest overall BOM costs. System level

Air Purification Combo ONE

Key Features & Benefits Calibrated signal outputs in compliance with international standards (PM1.0, PM2.5, PM10, TVOC, eCO2 1, AQI2, temperature and relative humidity). Matchbox-size, fully orchestrated design for space-constrained applications and lowest overall BOM costs. System level

Anti-Sulphur Precision Chip

Precision thin film technology Two grades of sulphur protection Precision to ±0.05% and ±10ppm/°C AEC-Q200 qualified option Anti-sulphur tested to EIA-977 cond. B & ASTM-B-809-95 modified

Anti-Sulphur Precision Chip

Precision thin film technology Two grades of sulphur protection Precision to ±0.05% and ±10ppm/°C AEC-Q200 qualified option Anti-sulphur tested to EIA-977 cond. B & ASTM-B-809-95 modified

Anti-Sulphur Precision Chip

Precision thin film technology Two grades of sulphur protection Precision to ±0.05% and ±10ppm/°C AEC-Q200 qualified option Anti-sulphur tested to EIA-977 cond. B & ASTM-B-809-95 modified

Anti-Sulphur Precision Chip

Precision thin film technology Two grades of sulphur protection Precision to ±0.05% and ±10ppm/°C AEC-Q200 qualified option Anti-sulphur tested to EIA-977 cond. B & ASTM-B-809-95 modified

Anti-Sulphur Precision Chip

Precision thin film technology Two grades of sulphur protection Precision to ±0.05% and ±10ppm/°C AEC-Q200 qualified option Anti-sulphur tested to EIA-977 cond. B & ASTM-B-809-95 modified

Anti-Sulphur Precision Chip

Precision thin film technology Two grades of sulphur protection Precision to ±0.05% and ±10ppm/°C AEC-Q200 qualified option Anti-sulphur tested to EIA-977 cond. B & ASTM-B-809-95 modified

High efficiency, 3.3V @ 95 (Typ)

Special Features • Point of load (POL) applications • High Current slew rate at 2.5A/us1 • Open frame SMT • High efficiency, 3.3V @ 95 (Typ) • Adjustable Output through external resistor programming • -40°C to +85°C Ambient operating temperature • UVLO protection • Positive Enable function

60 Watts

Special Features • Point of load (POL) applications • High Current slew rate at 2.5A/us1 • Open frame SMT • High efficiency, 3.3V @ 95 (Typ) • Adjustable Output through external resistor programming • -40°C to +85°C Ambient operating temperature • UVLO protection • Positive Enable function

3.0-5.5Vin / 18A Non-Isolated Point-of-Load

APC18T04 Series: 3.0-5.5Vin / 18A Non-Isolated Point-of-Load The APC18 DC-DC Power Module is a high efficiency non-isolated buck converter designed for use in a wide variety of applications. Packaged in an industry standard recognized SMT footprint: 1.3” x 0.53”, it works from a wide input voltag

60 Watts

Special Features • Point of load (POL) applications • High Current slew rate at 2.5A/us1 • Open frame SMT • High efficiency, 3.3V @ 95 (Typ) • Adjustable Output through external resistor programming • -40°C to +85°C Ambient operating temperature • UVLO protection • Positive Enable function

High efficiency, 3.3V @ 95 (Typ)

Special Features • Point of load (POL) applications • High Current slew rate at 2.5A/us1 • Open frame SMT • High efficiency, 3.3V @ 95 (Typ) • Adjustable Output through external resistor programming • -40°C to +85°C Ambient operating temperature • UVLO protection • Positive Enable function

High efficiency, 3.3V @ 95 (Typ)

Special Features • Point of load (POL) applications • High Current slew rate at 2.5A/us1 • Open frame SMT • High efficiency, 3.3V @ 95 (Typ) • Adjustable Output through external resistor programming • -40°C to +85°C Ambient operating temperature • UVLO protection • Positive Enable function

60 Watts

Special Features • Point of load (POL) applications • High Current slew rate at 2.5A/us1 • Open frame SMT • High efficiency, 3.3V @ 95 (Typ) • Adjustable Output through external resistor programming • -40°C to +85°C Ambient operating temperature • UVLO protection • Positive Enable function

12Vin / 18A Non-Isolated Point-of-Load

APC18T12 Series: 12Vin / 18A Non-Isolated Point-of-Load The APC18 DC-DC Power Module is a high efficiency non-isolated buck converter designed for use in a wide variety of applications. Packaged in an industry standard recognized SMT footprint: 1.3” x 0.53”, it works from a wide input voltage ran

12Vin / 18A Non-Isolated Point-of-Load

APC18T12 Series: 12Vin / 18A Non-Isolated Point-of-Load The APC18 DC-DC Power Module is a high efficiency non-isolated buck converter designed for use in a wide variety of applications. Packaged in an industry standard recognized SMT footprint: 1.3” x 0.53”, it works from a wide input voltage ran

75 Watts

APC18T12 Series: 12Vin / 18A Non-Isolated Point-of-Load The APC18 DC-DC Power Module is a high efficiency non-isolated buck converter designed for use in a wide variety of applications. Packaged in an industry standard recognized SMT footprint: 1.3” x 0.53”, it works from a wide input voltage ran

75 Watts

APC18T12 Series: 12Vin / 18A Non-Isolated Point-of-Load The APC18 DC-DC Power Module is a high efficiency non-isolated buck converter designed for use in a wide variety of applications. Packaged in an industry standard recognized SMT footprint: 1.3” x 0.53”, it works from a wide input voltage ran

12Vin / 18A Non-Isolated Point-of-Load

APC18T12 Series: 12Vin / 18A Non-Isolated Point-of-Load The APC18 DC-DC Power Module is a high efficiency non-isolated buck converter designed for use in a wide variety of applications. Packaged in an industry standard recognized SMT footprint: 1.3” x 0.53”, it works from a wide input voltage ran

Total Power: 75 Watts

Total Power: 75 Watts Input Voltages: 10.0 - 14.0 V # of Outputs: Single SPECIAL FEATURES ■ Point-of-load (POL) applications) ■ High current slew rate at 2.5 A / μS1 ■ Open frame SMT ■ High efficiency, 3.3 V @ 92 typical ■ Adjustable output through external resistor programming ■ -40 °C t

Total Power: 75 Watts

Total Power: 75 Watts Input Voltages: 10.0 - 14.0 V # of Outputs: Single SPECIAL FEATURES ■ Point-of-load (POL) applications) ■ High current slew rate at 2.5 A / μS1 ■ Open frame SMT ■ High efficiency, 3.3 V @ 92 typical ■ Adjustable output through external resistor programming ■ -40 °C t

1/3 inch Color IT-CCD Camera Module1A1

文件：122.02 Kbytes Page：2 Pages

包装：散装 描述：TOOL MFT PNEU EXTERNAL ADJ 工具 压接器，压接机，压力机

包装：散装 描述：TOOL MFT PNEU EXTERNAL ADJ 工具 压接器，压接机，压力机

Analog Camera Module 

40 Watts

文件：183.98 Kbytes Page：2 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

DC Metallic Loop Termination Module

文件：57.06 Kbytes Page：1 Pages

Anti-sulphur precision chip resistor - anti-sulphur range

40 Watts

文件：183.98 Kbytes Page：2 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

40 Watts

文件：183.98 Kbytes Page：2 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

40 Watts

文件：183.98 Kbytes Page：2 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

40 Watts

文件：183.98 Kbytes Page：2 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

40 Watts

文件：183.98 Kbytes Page：2 Pages

40 Watts

文件：183.98 Kbytes Page：2 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages

40 Watts

文件：183.98 Kbytes Page：2 Pages

Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output

文件：671.87 Kbytes Page：23 Pages