single-ldos

The AP7167 is a 1.2A, adjustable output voltage, ultra-low dropout linear regulator. The device includes pass element, error amplifier, band-gap reference, current limit and thermal shutdown circuitry. The device is turned on when EN pin is set to logic high level. A Power-OK (POK) output is availab Wide input voltage range: 2.2V – 5.5V230mV very low dropout at 500mA load500mV very low dropout at 1A loadVery low quiescent current (IQ): 125μA typicalAdjustable output voltage range: 0.8V to 5.0VVery fast transient responseHigh PSRRAccurate voltage regulationCurrent limiting and short circuit prot;

1.2A LOW DROPOUT REGULATOR WITH POK

文件：494.71 Kbytes Page：14 Pages

1.2A LOW DROPOUT REGULATOR WITH POK

文件：251.43 Kbytes Page：11 Pages

1.2A LOW DROPOUT REGULATOR WITH POK

文件：494.71 Kbytes Page：14 Pages

1.2A LOW DROPOUT REGULATOR WITH POK

文件：494.71 Kbytes Page：14 Pages

1.2A LOW DROPOUT REGULATOR WITH POK

文件：251.43 Kbytes Page：11 Pages

封装/外壳：10-UFDFN 裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC REG LIN POS ADJ 1.2A 10DFN 集成电路（IC） 线性 + 开关稳压器

封装/外壳：8-SOIC（0.154"，3.90mm 宽）裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC REG LINEAR POS ADJ 1.2A 8SO 集成电路（IC） 稳压器 - 线性

1.2A LOW DROPOUT REGULATOR WITH POK

文件：494.71 Kbytes Page：14 Pages

Integrated Circuit Vertical Deflection Output Circuit

Description: The NTE7167 is a vertical deflection output integrated circuit in a 7-Lead SIP type package designed for use in high-resolution television and CRT display systems that use a bus controller system signal processing IC. It can directly drive the deflection yoke (including the required

YUV-to-RGB Digital-to-Analog Converter DAC

GENERAL DESCRIPTION The SAA7167 is a mixed-mode designed IC containing a video data path, keying control block, analog mixer, and a voltage output amplifier, capable of converting digital video data to analog RGB video, and then mixing video and external analog RGB inputs. FEATURES • On

YUV-to-RGB digital-to-analog converter