Single Coil Fan Motor Full Wave Driver

General Description The AP1304/5 is single phase full wave drive design, which is suited for small fans (such as CPU cooling fans). The low switching noise and effective motor drive are another advantage. All functions, including lock shutdown, automatic restart, rotation detection (RD), and sp

Power FET (Ceramic Package Type)

GENERAL DESCRIPTION The KGF1305T, housed in a ceramic package with integrated heat sink, is a discrete UHF-band power FET that features high efficiency, high output power, and low current operation. The KGF1305T specifications are guaranteed to a fixed matching circuit for 5.4 V and 850 MHz; exte

High Endurance CMOS 192 bit EEPROM With Secure Logic Access Control

DESCRIPTION The ST1305 is a 192-bit EEPROM device with associated security logic to control memory access. The circuit includes counting capabilities and thus is very well adapted to prepaid card applications. ■ Single 5 V Supply Voltage ■ Programming Time: 5 ms ■ Memory Divided Into: – 1

Memory Micromodules General Information for D1, D2 and C Packaging

DESCRIPTION Memory Cards consist of two main parts: the plastic card, and the embedded Micromodule (which, in turn, carries the silicon chip). ■ Micromodules were developed specifically for embedding in Smartcards and Memory Cards ■ The Micromodule provides: – Support for the chi

Stereo 1fs data input up-sampling filter with bitstream continuous dual DAC BCC-DAC2

GENERAL DESCRIPTION The TDA1305T is a new generation of filter-DAC which features a unique combination of bitstream and continuous calibration techniques. The converter functions as a bitstream converter for low signals while large signals are generated using the dynamic continuous calibration

Stereo 1fs data input up-sampling filter with bitstream continuous dual DAC BCC-DAC2

GENERAL DESCRIPTION The TDA1305T is a new generation of filter-DAC which features a unique combination of bitstream and continuous calibration techniques. The converter functions as a bitstream converter for low signals while large signals are generated using the dynamic continuous calibration