AP104220-FX 2U Rack Mount Patch Panel Housing

Product Description FX 2U Rack Mount Housing, front-access design, holds up to 12 KeyConnect module cassettes, Black (Empty)

Blank Plate

Product Description Blank Plate for Unoccupied Patch Panel Housing Slots, Black

Cassette Holder

Product Description Cassettes holder support KeyConnect module cassettes for different applications

32V 1ch H-Bridge Motor Driver IC

The AP1042 is a 1ch H-Bridge motor driver that supports a maximum output current of 5.0A and from 8 to 32V operation voltage. The control mode of the AP1042 can be switched between parallel input mode and complemental input mode by the SEL pin. The built-in PWM duty control circuit enables speed adj

System Controller for Compact Disc Players

Description The CXP1042Q is a 4-bit single chip microcomputer based on the SPC500 series. It incorporates programs in firmware for CD operations. It can be connected directly to the CDL-500 series of LSIs for CD players, and can directly drive LCDs, in addition to other features. It can be employ

EPITAXIAL PLANAR PNP TRANSISTOR (GENERAL PURPOSE)

GENERAL PURPOSE APPLICATION. FEATURES • Low Collector-Emitter Saturation Voltage : VCE(sat)=-2.0V(Max.). • Complementary to KTC2022D/L.

STEPPER MOTOR DRIVER

Stepper Motor Driver The SAA1042 drives a two–phase stepper motor in the bipolar mode. The device contains three input stages, a logic section and two output stages. The IC is contained in a 16 pin dual–in–line heat tab plastic package for improved heatsinking capability. The center four gr

STEPPER MOTOR DRIVER

Stepper Motor Driver The SAA1042 drives a two–phase stepper motor in the bipolar mode. The device contains three input stages, a logic section and two output stages. The IC is contained in a 16 pin dual–in–line heat tab plastic package for improved heatsinking capability. The center four gr

Fluid Level Detector

文件：170.93 Kbytes Page：8 Pages