Quad BTL Power Driver Motor Driver ICs

Features 1) A power saving mold is enabled by power-saver terminal. 2) Small surface mounting power package (HSOP-28) 3) Separating Vcc into Pre and Pow, can make better power efficiency 4) Thermal-shut-down circuit built in 5) Wide dynamic range 6) BT

Five Channels BTL Power Driver

Features 1) A power saving mode is enabled by power-save terminal. 2) Small surface mounting power package (HSOP-28) 3) Separating Vcc into Pre and Pow, can make better power efficiency 4) Thermal-shut-down circuit built in 5) Wide dynamic range 6) BTL

ODD/ Automotive CD/DVD

The AM5810C is a 5-channel BTL driver - 2 of the channels are able to drive stepping motor, and 1 channel is for reversible driver. Package material is Pb Free for purpose of environmental protection. Cu bonding wire for better conductivity. 1)A power saving mode is enabled by power-save terminal. \n2)Small surface mounting power package (HSOP-28)\n3)Separating Vcc into Pre and Pow, can make better power efficiency\n4)Thermal-shut-down circuit built in\n5)Wide dynamic range ＜4.OV (Typ.) at PreVcc=12V, PowVcc=5V＞\n6)BTL driver:Input pins;

ODD/ Automotive CD/DVD

The AM5810FM is a 5-channel BTL driver - 2 of the channels are able to drive stepping motor, and 1 channel is for reversible driver. Package material is Pb Free for purpose of environmental protection. 1)A power saving mode is enabled by power-save terminal. \n2)Small surface mounting power package (HSOP-28)\n3)Separating Vcc into Pre and Pow, can make better power efficiency\n4)Thermal-shut-down circuit built in\n5)Wide dynamic range ＜4.OV (Typ.) at PreVcc=12V, PowVcc=5V＞\n6)BTL driver:Input pins;

Five Channels BTL Power Driver

Features 1) A power saving mode is enabled by power-save terminal. 2) Small surface mounting power package (HSOP-28) 3) Separating Vcc into Pre and Pow, can make better power efficiency 4) Thermal-shut-down circuit built in 5) Wide dynamic range 6) BTL

BiMOS II 10-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS WITH ACTIVE-DMOS PULL-DOWNS

The UCN5810AF, UCN5810EPF, and UCN5810LWF combine a 10-bit CMOS shift register and accompanying data latches, control circuitry, bipolar sourcing outputs with DMOS active pull-downs. Designed primarily to drive vacuum-fluorescent displays, the 60 V and -40 mA output ratings also allow these device

Silicon Power Rectifier Diode, 12 Amp

Description: The NTE5810, NTE5811, and NTE5870 through NTE5891 are low power general purpose rectifier diodes in a DO4 type package designed for battery chargers, converters, power supplies, and machine tool controls. Features: • High Surge Current Capability • High Voltage Available

BiMOS II 10-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS WITH ACTIVE-DMOS PULL-DOWNS

The UCN5810AF, UCN5810EPF, and UCN5810LWF combine a 10-bit CMOS shift register and accompanying data latches, control circuitry, bipolar sourcing outputs with DMOS active pull-downs. Designed primarily to drive vacuum-fluorescent displays, the 60 V and -40 mA output ratings also allow these device

BiMOS II 10-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS WITH ACTIVE-DMOS PULL-DOWNS

The UCN5810AF, UCN5810EPF, and UCN5810LWF combine a 10-bit CMOS shift register and accompanying data latches, control circuitry, bipolar sourcing outputs with DMOS active pull-downs. Designed primarily to drive vacuum-fluorescent displays, the 60 V and -40 mA output ratings also allow these device

BiMOS II 10-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS WITH ACTIVE-DMOS PULL-DOWNS

The UCN5810AF, UCN5810EPF, and UCN5810LWF combine a 10-bit CMOS shift register and accompanying data latches, control circuitry, bipolar sourcing outputs with DMOS active pull-downs. Designed primarily to drive vacuum-fluorescent displays, the 60 V and -40 mA output ratings also allow these device