热释电红外控制电路

AiP9803是为热释电红外传感器配套设计的专用集成电路，采用CMOS工艺制造。其外围器件大大减少，节约了空间和成本及调试时间，提高整机可靠性，可广泛应用于照明控制、马达和电磁阀控制，防盗报警等领域。 • 工作电压为4.0V～5.5V（DC），工作电流小于1mA。\n• 外接有硫化镉（CDS）传感器，白天抑制输出。\n• 内置两级运放，增益可调。\n• 内置稳压输出3.1V直接驱动PIR。\n• 封装形式：SOP16/DIP16;

CCD Signal Processor For Electronic Cameras

PRODUCT DESCRIPTION The AD9803 is a complete CCD and video signal processor developed for electronic cameras. It is well suited for video camera and still-camera applications. The 18 MHz CCD signal processing chain consists of a CDS, low noise PGA, and 10-bit ADC. Required clamping circuitry and

CCD Signal Processor For Electronic Cameras

PRODUCT DESCRIPTION The AD9803 is a complete CCD and video signal processor developed for electronic cameras. It is well suited for video camera and still-camera applications. The 18 MHz CCD signal processing chain consists of a CDS, low noise PGA, and 10-bit ADC. Required clamping circuitry and

INFRAED REMOCON RECEIVER

INFRAED REMOCON RECEIVER

Voice Synthesis IC with Built-in Mask ROM

GENERAL DESCRIPTION The MSM9802/03/05 is a PCM voice synthesis IC with built-in mask ROM. This IC has two user selectable playback algorithms, OKI Non-linear PCM and straight PCM. It also contains a current mode 10-bit D/A converter and a low-pass filter. External control has been made easy by

P-Channel Reduced Qg Fast Switching MOSFET

文件：51.36 Kbytes Page：4 Pages