电压反转器电路

AiP7660 是一款 DC/DC 电荷泵电压反转器专用集成电路。内置了 8.5KHz 的 RC 振荡，电平转换和功率 MOS 管。电路在无负载时，负压转换率可达到 99.9%。电路可以在 1.5V～10V 的宽电压下进行负压转换输出，负压转换输出时只需外接两只电容，无需电感。正倍压转换输出时，外接两只电容，两只电阻和一只二极管，无需电感。该电路的无负载电流小、驱动能力强。 • 负压转换输出\n• 工作电压： 1.5V～10.0V（负压转换）\n• 电压转换精度高： 99.9%（无负载，负压转换）\n• 低功耗无负载电流为： 80uA（输入5V时）\n• 可级联输出产生2n倍电压\n• 封装形式：DIP8/SOP8;

InGaAsP STRAINED DC-PBH LASER DIODE MODULE 1 625 nm TELEMETRY APPLICATION

DESCRIPTION The NX7660JC is a 1 625 nm newly developed Strained Multiple Quantum Well (St-MQW) structure laser diode DIP module with single mode fiber and internal thermoelectric cooler. It is designed for light sources of telemetry equipment. FEATURES • Output power Pf = 5 mW MIN. @ IF = 65 mA

1 510 nm OPTICAL FIBER COMMUNICATIONS InGaAsP STRAINED MQW DC-PBH LASER DIODE MODULE

DESCRIPTION The NX8501 Series is a 1 510 nm phase-shifted DFB (Distributed Feed-Back) laser diode with single mode fiber. The Multiple Quantum Well (MQW) structure is adopted to achieve stable dynamic single longitudinal mode operation over wide temperature range of 0 to +65 °C. It is designed

1 480 nm EDFA APPLICATION InGaAsP STRAINED MQW DC-PBH LASER DIODE MODULE

DESCRIPTION The NX7460LE is a 1 480 nm pumping laser diode module with optical isolator for an EDFA (Er Doped optical Fiber Amplifier) that can expand the transmission span and compensate optical losses. It has a strained Multiple Quantum Well (st-MQW) DC-PBH laser diode that features high output

InGaAsP STRAINED DC-PBH LASER DIODE MODULE 1 625 nm TELEMETRY APPLICATION

DESCRIPTION The NX7660JC is a 1 625 nm newly developed Strained Multiple Quantum Well (St-MQW) structure laser diode DIP module with single mode fiber and internal thermoelectric cooler. It is designed for light sources of telemetry equipment. FEATURES • Output power Pf = 5 mW MIN. @ IF = 65 mA

InGaAsP STRAINED DC-PBH LASER DIODE MODULE 1 625 nm TELEMETRY APPLICATION

DESCRIPTION The NX7660JC is a 1 625 nm newly developed Strained Multiple Quantum Well (St-MQW) structure laser diode DIP module with single mode fiber and internal thermoelectric cooler. It is designed for light sources of telemetry equipment. FEATURES • Output power Pf = 5 mW MIN. @ IF = 65 mA