3.75 kV, 6-Channel, SPIsolator Digital Isolator for SPI with Delay Clock

GENERAL DESCRIPTION The ADuM31501 is a 6-channel SPIsolator™ digital isolator optimized for isolated serial peripheral interfaces (SPIs). Based on the Analog Devices, Inc., iCoupler® chip scale transformer technology, the low propagation delay in the CLK, MO/SI, MI/SO, and SS SPI bus signals s

3.75 kV, 7-Channel, SPIsolator Multiple Slave, Digital Isolator for SPI

GENERAL DESCRIPTION The ADuM31541 is an SPIsolator™ digital isolator optimized for a serial peripheral interface (SPI) that includes support for up to four slave devices. Based on the Analog Devices, Inc., iCoupler® chip scale transformer technology, the low propagation delay and jitter in the CL

5 kV, 6-Channel, SPIsolator Digital Isolator for SPI with Delay Clock

GENERAL DESCRIPTION The ADuM41501 is a 6-channel, SPIsolator™ digital isolator optimized for isolated serial peripheral interfaces (SPIs). Based on the Analog Devices, Inc., iCoupler® chip scale transformer technology, the low propagation delay in the CLK, MO/SI, MI/SO, and SS SPI bus signals sup

5 kV, 7-Channel, SPIsolator Digital Isolators for SPI

GENERAL DESCRIPTION The ADuM4151/ADuM4152/ADuM41531 are 7-channel, SPIsolator™ digital isolators optimized for isolated serial peripheral interfaces (SPIs). Based on the Analog Devices, Inc., iCoupler® chip scale transformer technology, the low propagation delay in the CLK, MO/SI, MI/SO, and SS S

5 kV, 7-Channel, SPIsolator Multiple Slave, Digital Isolator for SPI

GENERAL DESCRIPTION The ADuM41541 is an SPIsolator™ digital isolator optimized for a serial peripheral interface (SPI) that includes support for up to four slave devices. Based on the Analog Devices, Inc., iCoupler® chip scale transformer technology, the low propagation delay and jitter in the CL

用于SPI接口的5 kV专用隔离器（1/2辅助通道方向性）

ADuM4151/ADuM4152/ADuM4153为5kV rms、7通道SPIsolator™数字隔离器，针对隔离式串行外设接口(SPI)进行了优化。(提供3.75kV rms型号)。 这些器件基于ADI公司的iCoupler®芯片级变压器技术，在CLK、MO/SI、MI/SO和SS SPI总线信号中具有低传播延迟特性，可支持最高17 MHz的SPI时钟速率。 这些通道在工作时具有14 ns传播延迟和1 ns抖动，以针对SPI优化时序。 \n\n ADuM4151/ADuM4152/ADuM4153隔离器还以三种不同的通道方向组合额外提供了三个独立的低数据速率隔离通道。 器件以2 • 支持最高17 MHz的SPI时钟速度\n• 4个高速、低传播延迟、SPI信号隔离通道\n• 三个250 kbps数据通道\n• 20引脚SOIC_IC封装，爬电距离为8.3 mm\n• 工作温度高达：125°C\n• 高共模瞬变抗扰度：>25 kV/µs\n• 安全和法规认证\n• 1分钟5000 V rms，SOIC长封装\n• CSA元件验收通知5A\n• VDE合格证书\n• 最大工作绝缘电压(VIORM)：849 V峰值;

5 kV, 7-Channel, SPIsolator Digital Isolators for SPI

GENERAL DESCRIPTION The ADuM4151/ADuM4152/ADuM41531 are 7-channel, SPIsolator™ digital isolators optimized for isolated serial peripheral interfaces (SPIs). Based on the Analog Devices, Inc., iCoupler® chip scale transformer technology, the low propagation delay in the CLK, MO/SI, MI/SO, and SS S

5 kV, 7-Channel, SPIsolator Digital Isolators for SPI

GENERAL DESCRIPTION The ADuM4151/ADuM4152/ADuM41531 are 7-channel, SPIsolator™ digital isolators optimized for isolated serial peripheral interfaces (SPIs). Based on the Analog Devices, Inc., iCoupler® chip scale transformer technology, the low propagation delay in the CLK, MO/SI, MI/SO, and SS S

5 kV, 7-Channel, SPIsolator Digital Isolators for SPI

GENERAL DESCRIPTION The ADuM4151/ADuM4152/ADuM41531 are 7-channel, SPIsolator™ digital isolators optimized for isolated serial peripheral interfaces (SPIs). Based on the Analog Devices, Inc., iCoupler® chip scale transformer technology, the low propagation delay in the CLK, MO/SI, MI/SO, and SS S

5 kV, 7-Channel, SPIsolator Digital Isolators for SPI

GENERAL DESCRIPTION The ADuM4151/ADuM4152/ADuM41531 are 7-channel, SPIsolator™ digital isolators optimized for isolated serial peripheral interfaces (SPIs). Based on the Analog Devices, Inc., iCoupler® chip scale transformer technology, the low propagation delay in the CLK, MO/SI, MI/SO, and SS S

5 kV, 7-Channel, SPIsolator Digital Isolators for SPI

文件：447.44 Kbytes Page：22 Pages

5 kV, 7-Channel, SPIsolator Digital Isolators for SPI

文件：447.44 Kbytes Page：22 Pages

5 kV, 7-Channel, SPIsolator Digital Isolators for SPI

文件：447.44 Kbytes Page：22 Pages

5 kV, 7-Channel, SPIsolator Digital Isolators for SPI

文件：447.44 Kbytes Page：22 Pages

Marktech Rectangular 2x5mm LEDs

FEATURES • Flangeless package • Diffused lens • All plastic mold type • Low drive current • Other colors/materials available

Marktech Rectangular 2x5mm LEDs

FEATURES • Flangeless package • Diffused lens • All plastic mold type • Low drive current • Other colors/materials available

Voltage-to-Frequency Converters

Description The RC4152 is a monolithic circuit containing all of the active components needed to build a complete voltage-to frequency converter. Circuits that convert a DC voltage to a pulse train can be built by adding a few resistors and capacitors to the internal comparator, one-shot, volta

AF Power Amplifier (Split Power Supply) (30W 30W min, THD = 0.4)

Features • The STK4102II series (STK4152II) and STK4101V series (high-grade type) are pin-compatible in the out put range of 6W to 50W and enable easy design. • Small-sized package whose pin assignment is the same as that of the STK4101II series • Built-in muting circuit to cut off variou

AF Power Amplifier (Split Power Supply) (30W 30W min, THD = 0.4)

Features • The STK4102II series (STK4152II) and STK4101V series (high-grade type) are pin-compatible in the out put range of 6W to 50W and enable easy design. • Small-sized package whose pin assignment is the same as that of the STK4101II series • Built-in muting circuit to cut off variou