3.75 kV RMS Digital Isolators for Isolated USB 2.0 High, Full, and Low Speed

GENERAL DESCRIPTION The ADuM3165/ADuM31661 are USB 2.0 port isolators, utilizing Analog Devices, Inc., iCoupler® technology to dynamically support all USB 2.0 data rates: low (1.5 Mbps), full (12 Mbps), or high (480 Mbps), as required. The devices support host isolation with automatic speed n

用于隔离USB 2.0高速、全速和低速应用的3.75 kV RMS数字隔离器

ADuM3165/ADuM31661 均为采用ADI公司iCoupler®技术的USB 2.0端口隔离器，可根据需要动态支持所有USB 2.0数据速率：低速(1.5 Mbps)、全速(12 Mbps)或高速(480 Mbps)。这些器件支持具有自动速度协商功能的主机隔离以及外设隔离。\n\n 对高速数据进行重定时以降低抖动，同时需要外部时钟信号或晶振输入。ADuM3165在上游侧支持时钟或晶振输入，而ADuM3166在下游侧支持时钟或晶振输入，同时提供两种选项以满足系统设计要求。\n\n 下游（第2侧）低功耗待机模式支持具有有限可用功耗的应用，如电池供电外设。上游（第1侧） • USB 2.0 信号自动检测低速、全速和高速连接• 1.5 Mbps、12 Mbps 和 480 Mbps 数据速率\n\n• 用于上游和下游端口的双向 USB 隔离器• 重新驱动和高速数据重新定时，以消除输入抖动和睁眼\n• 灵活的时钟输入选项\n\n• 每侧 4.5 V 至 5.5 V VBUSx 或 3 V 至 3.6 V 操作• 21 mA 典型空闲、低速或全速模式供电电流\n• 48 mA 典型空闲、高速模式供电电流\n\n• USB 2.0 挂起 (L2) 或断开时的超低功耗待机• 1.7 mA 典型低功耗待机、上游供电电流\n• 20 μA 典型低功耗待机、上游供电电流\n\;

3.75 kV RMS Digital Isolators for Isolated USB 2.0 High, Full, and Low Speed

GENERAL DESCRIPTION The ADuM3165/ADuM31661 are USB 2.0 port isolators, utilizing Analog Devices, Inc., iCoupler® technology to dynamically support all USB 2.0 data rates: low (1.5 Mbps), full (12 Mbps), or high (480 Mbps), as required. The devices support host isolation with automatic speed n

3.75 kV RMS Digital Isolators for Isolated USB 2.0 High, Full, and Low Speed

GENERAL DESCRIPTION The ADuM3165/ADuM31661 are USB 2.0 port isolators, utilizing Analog Devices, Inc., iCoupler® technology to dynamically support all USB 2.0 data rates: low (1.5 Mbps), full (12 Mbps), or high (480 Mbps), as required. The devices support host isolation with automatic speed n

Electronic Switching Circuit

Description The CA3165 is a single chip electronic switching circuit intended primarily for ignition applications. It includes an oscillator that is amplitude-modulated by the rotor teeth of a distributor, a detector that develops the positive going modulation envelope, a Schmitt trigger that eli

Electronic Switching Circuit

Description The CA3165 is a single chip electronic switching circuit intended primarily for ignition applications. It includes an oscillator that is amplitude-modulated by the rotor teeth of a distributor, a detector that develops the positive going modulation envelope, a Schmitt trigger that eli

3V 1700MHz LINEAR POWER AMPLIFIER MODULE

Product Description The RF3165 is a high-power, high-efficiency linear amplifier module specifically designed for 3V handheld systems. The device is manufactured on an advanced third generation GaAs HBT process, and was designed for use as the final RF amplifier in 3V W-CDMA handheld digital cell

LED Displays Numeric 7-segment

文件：295.65 Kbytes Page：7 Pages

Solar Array Blocking Diode

文件：54.03 Kbytes Page：1 Pages