Evaluation Board for the ADA4571-2 Integrated AMR Angle Sensor and Signal Conditioner

GENERAL DESCRIPTION The EVAL-ADA4571-2 shows the ADA4571-2 in an end of shaft magnet configuration. The evaluation kit is composed of an ADA4571-2 motherboard, a magnetic stimulus on a hand turnable mount, a USB interface, and an SDP-S controller board. The required LabVIEW 2013 graphical user in

High Accuracy Ultralow IQ, 500 mA anyCAP Adjustable Low Dropout Regulator

GENERAL DESCRIPTION The ADP3336 is a member of the ADP333x family of precision low dropout anyCAP voltage regulators. The ADP3336 operates with an input voltage range of 2.6 V to 12 V and delivers a continuous load current up to 500 mA. The ADP3336 stands out from conventional LDOs with the lowes

小型、可调输出、500 MA ANYCAP®低压差稳压器

ADP3336属于ADP333x系列精密低压差anyCAP®稳压器，输入电压范围为+2.6 V至+12 V，最大连续负载电流为500 mA。该器件采用MSOP-8封装且热阻最低，并采用改良的工艺，与传统LDO相比性能更出色，比竞争产品更具性能优势。它采用专利设计，仅需一个1.0 µF输出电容便可保持稳定。这款器件对输出电容的等效串联电阻(ESR)不敏感，使用任何优质电容均可稳定工作，包括适合空间受限应用的陶瓷(MLCC)型电容。ADP3336在室温条件下可达到±0.9%的出色精度，温度、线路和负载变化的精度为±1.8%。500 mA时，其压差仅200 mV（典型值）。该器件还具 高线路和负载精度：±0.9% (25°C)，±1.8%（整个温度范围）\n超低压差：500 mA时，200 mV（典型值） \n仅需 CO = 1.0 µF便可保持稳定\nanyCAP = 使用任意类型的电容（包括MLCC）均可保持稳定\n限流、限热\n低噪声\n低关断电流：<1.0 μA\n电源电压范围：2.6 V至12 V\n输出范围：1.5 V至10 V\n超小型热增强8引脚MSOP封装 \n超小型、散热增强、8引脚MSOP封装;

Customer supplied 6 V to 12 V bench supply

文件：847.57 Kbytes Page：13 Pages

Adjustable Low Dropout Regulator

文件：392.96 Kbytes Page：9 Pages

封装/外壳：8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 包装：管件 描述：IC REG LDO ADJ 500MA 8-MSOP 集成电路（IC） 线性 + 开关稳压器

封装/外壳：8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC REG LIN POS ADJ 500MA 8MSOP 集成电路（IC） 稳压器 - 线性

4-Head VCR Recording/Playback Amplifier IC

■ Features • Playback VCC = 5.0V, recording VCC = 12V • Built-in RF-AGC circuit • Built-in automatic tracking I/O circuit • Built-in envelope comparing circuit

4-Head VCR Recording/Playback Amplifier IC

■ Features • Playback VCC = 5.0V, recording VCC = 12V • Built-in RF-AGC circuit • Built-in automatic tracking I/O circuit • Built-in envelope comparing circuit

Hyper 3 mm T1 LED, Non Diffused Hyper-Bright LED

Features ●colorless, clear package ●optical coupling into light pipes ●for use as optical indicator ●solder leads with stand-off ●available taped on reel ●load dump resistant acc. to DIN 40839

Hyper 3 mm T1 LED, Non Diffused Hyper-Bright LED

Features ●colorless, clear package ●optical coupling into light pipes ●for use as optical indicator ●solder leads with stand-off ●available taped on reel ●load dump resistant acc. to DIN 40839

Hyper 3 mm T1 LED, Non Diffused Hyper-Bright LED

Features ●colorless, clear package ●optical coupling into light pipes ●for use as optical indicator ●solder leads with stand-off ●available taped on reel ●load dump resistant acc. to DIN 40839