Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp

PRODUCT DESCRIPTION The ADN2819 provides the receiver functions of quantization, signal level detect, and clock and data recovery at rates of OC-3, OC-12, OC-48, Gigabit Ethernet, and 15/14 FEC rates. All SONET jitter requirements are met, including jitter transfer, jitter generation, and jitter

Multirate to 2.7 Gbps Clock and Data Recovery IC with Integrated Limiting Amp

FEATURES Meets SONET requirements for jitter transfer/generation/tolerance Quantizer sensitivity: 4 mV typical Adjustable slice level: ±100 mV 1.9 GHz minimum bandwidth Patented clock recovery architecture Loss of signal detect range: 3 mV to 15 mV Single reference clock frequency for all r

多速率限幅放大器与时钟和数据恢复IC

ADN2819可提供下列接收器功能：量化、信号电平检测、时钟和数据恢复，适用于OC-3、OC-12、千兆以太网、OC-48和所有FEC速率。该器件满足所有的SONET抖动要求，包括抖动传递、抖动产生和抖动容差。所有规格均相对于-40ºC 至+85°C环境温度而言，除非另有说明。                                     专有延迟和锁相环设计可提供前所未有的抖动性能，适用于稳定可靠的高速网络设计。该器件主要用于WDM系统，可以结合外部参考时钟或片内晶体振荡器使用。ADN2819同时支持本有速率和15/14速率数字包装器，无需更改参考时钟。该器件配合PIN二极管和T • 多速率(155/166 Mbps, 622/666 Mbps, 1.25/1.34 Gbps, 2.49/2.67 Gbps)\n\n• 集成限幅放大器，限幅可调\n\n• 量化器灵敏度：6 mV\n\n• 可调限幅电平：±100 mV\n\n• 超过所有的SONET/SDH抖动传递、产生和容差要求\n\n• 内部多路复用器可旁路CDR\n\n• 低功耗：540 mW\n\n• 单电源：3.0 V至3.6 V\n\n• 单一参考时钟频率适用于所有速率\n\n• 失锁指示器\n\n• 小尺寸：48引脚LFCSP封装（整体尺寸7 mm x 7 mm）;

Multirate to 2.7 Gbps Clock and Data Recovery IC with Integrated Limiting Amp

FEATURES Meets SONET requirements for jitter transfer/generation/tolerance Quantizer sensitivity: 4 mV typical Adjustable slice level: ±100 mV 1.9 GHz minimum bandwidth Patented clock recovery architecture Loss of signal detect range: 3 mV to 15 mV Single reference clock frequency for all r

Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp

PRODUCT DESCRIPTION The ADN2819 provides the receiver functions of quantization, signal level detect, and clock and data recovery at rates of OC-3, OC-12, OC-48, Gigabit Ethernet, and 15/14 FEC rates. All SONET jitter requirements are met, including jitter transfer, jitter generation, and jitter

Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp

PRODUCT DESCRIPTION The ADN2819 provides the receiver functions of quantization, signal level detect, and clock and data recovery at rates of OC-3, OC-12, OC-48, Gigabit Ethernet, and 15/14 FEC rates. All SONET jitter requirements are met, including jitter transfer, jitter generation, and jitter

Multirate to 2.7 Gbps Clock and Data Recovery IC with Integrated Limiting Amp

FEATURES Meets SONET requirements for jitter transfer/generation/tolerance Quantizer sensitivity: 4 mV typical Adjustable slice level: ±100 mV 1.9 GHz minimum bandwidth Patented clock recovery architecture Loss of signal detect range: 3 mV to 15 mV Single reference clock frequency for all r

Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp

PRODUCT DESCRIPTION The ADN2819 provides the receiver functions of quantization, signal level detect, and clock and data recovery at rates of OC-3, OC-12, OC-48, Gigabit Ethernet, and 15/14 FEC rates. All SONET jitter requirements are met, including jitter transfer, jitter generation, and jitter

Multirate to 2.7 Gbps Clock and Data Recovery IC with Integrated Limiting Amp

FEATURES Meets SONET requirements for jitter transfer/generation/tolerance Quantizer sensitivity: 4 mV typical Adjustable slice level: ±100 mV 1.9 GHz minimum bandwidth Patented clock recovery architecture Loss of signal detect range: 3 mV to 15 mV Single reference clock frequency for all r

Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp

PRODUCT DESCRIPTION The ADN2819 provides the receiver functions of quantization, signal level detect, and clock and data recovery at rates of OC-3, OC-12, OC-48, Gigabit Ethernet, and 15/14 FEC rates. All SONET jitter requirements are met, including jitter transfer, jitter generation, and jitter

Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp

文件：585.96 Kbytes Page：24 Pages

封装/外壳：48-WFQFN 裸露焊盘，CSP 包装：散装 描述：IC CLOCK/DATA RECOVERY 48LFCSP 集成电路（IC） 应用特定时钟/定时

封装/外壳：48-WFQFN 裸露焊盘，CSP 包装：托盘 描述：IC CLOCK/DATA RECOVERY 48LFCSP 集成电路（IC） 应用特定时钟/定时

SINGLE-CHANNEL HIGH-SPEED MOSFET DRIVER

文件：371.58 Kbytes Page：20 Pages

SINGLE-CHANNEL HIGH-SPEED MOSFET DRIVER

文件：371.58 Kbytes Page：20 Pages

PROGRAMMABLE OUTPUT POWER FACTOR PREREGULATOR

文件：156.39 Kbytes Page：10 Pages

PROGRAMMABLE OUTPUT POWER FACTOR PREREGULATOR

文件：156.39 Kbytes Page：10 Pages

PROGRAMMABLE OUTPUT POWER FACTOR PREREGULATOR

文件：156.39 Kbytes Page：10 Pages