Octal, RS-232/RS-423 Line Driver

GENERAL DESCRIPTION The ADM5170 is an octal line driver suitable for digital communication systems with data rates up to 116 kB/s. Input TTL or CMOS signal levels are inverted and translated into either EIA RS-232E or RS-423A signal levels depending on the status of the Mode Select inputs MS+ and

八通道、RS-232/RS-423线路驱动器

ADM5170是一款八通道线路驱动器，适用于数字通信系统，数据速率最高可达116 kB/s。根据模式选择输入MS+和MS-的状态，TTL或CMOS输入信号电平可反相，并转换为EIA RS-232E或RS-423A信号电平。当两路模式选择输入均接地(GND)时，器件以RS-423模式工作；当MS+接至VDD 且MS-接至VSS时，器件以RS-232模式工作。\n\n 利用SRA（压摆率调整）引脚与GND之间所连的外部电阻，可以控制输出压摆率。电阻值可以在2 kΩ至10 kΩ之间选择，相应的压摆率可在10 V/µs至2.2 V/µs范围内调整。通过这种方法调整压摆率，可以使输出特性适合所 • 一个封装中集成8个单端线路驱动器\n\n• 符合EIA标准RS-232E、RS-423A和CCITT V.10/X.26\n\n• 电阻可编程压摆率\n\n• 宽电源电压范围\n\n• 低功耗CMOS\n\n• 三态输出\n\n• TTL/CMOS 兼容型输入\n\n• 输出短路保护\n\n• 提供28引脚DIP/PLCC封装\n\n• UC5170C的低功耗替代器件;

Octal, RS-232/RS-423 Line Driver

文件：152.53 Kbytes Page：7 Pages

Octal, RS-232/RS-423 Line Driver

GENERAL DESCRIPTION The ADM5170 is an octal line driver suitable for digital communication systems with data rates up to 116 kB/s. Input TTL or CMOS signal levels are inverted and translated into either EIA RS-232E or RS-423A signal levels depending on the status of the Mode Select inputs MS+ and

Octal, RS-232/RS-423 Line Driver

GENERAL DESCRIPTION The ADM5170 is an octal line driver suitable for digital communication systems with data rates up to 116 kB/s. Input TTL or CMOS signal levels are inverted and translated into either EIA RS-232E or RS-423A signal levels depending on the status of the Mode Select inputs MS+ and

Octal, RS-232/RS-423 Line Driver

GENERAL DESCRIPTION The ADM5170 is an octal line driver suitable for digital communication systems with data rates up to 116 kB/s. Input TTL or CMOS signal levels are inverted and translated into either EIA RS-232E or RS-423A signal levels depending on the status of the Mode Select inputs MS+ and

Octal, RS-232/RS-423 Line Driver

GENERAL DESCRIPTION The ADM5170 is an octal line driver suitable for digital communication systems with data rates up to 116 kB/s. Input TTL or CMOS signal levels are inverted and translated into either EIA RS-232E or RS-423A signal levels depending on the status of the Mode Select inputs MS+ and

Octal, RS-232/RS-423 Line Driver

文件：142.02 Kbytes Page：6 Pages

Octal, RS-232/RS-423 Line Driver

文件：152.53 Kbytes Page：7 Pages

封装/外壳：28-LCC（J 形引线） 包装：管件 描述：IC DRIVER 8/0 28PLCC 集成电路（IC） 驱动器，接收器，收发器

封装/外壳：28-LCC（J 形引线） 包装：管件 描述：IC DRIVER 8/0 28PLCC 集成电路（IC） 驱动器，接收器，收发器

Octal, RS-232/RS-423 Line Driver

文件：152.53 Kbytes Page：7 Pages

Octal, RS-232/RS-423 Line Driver

文件：152.53 Kbytes Page：7 Pages

OCTAL LINE DRIVER

DESCRIPTION L5170 is an octal line driver unit in DIP28 and PLCC28 packages intended for use in the EIA std RS232D, RS423A and CCITT V.10 and V.28 applications. With no external components L5170 is able to drive a line up to 5000ft assuming the line capacitance is 35pF per ft and the capacitance

OCTAL LINE DRIVER

DESCRIPTION L5170 is an octal line driver unit in DIP28 and PLCC28 packages intended for use in the EIA std RS232D, RS423A and CCITT V.10 and V.28 applications. With no external components L5170 is able to drive a line up to 5000ft assuming the line capacitance is 35pF per ft and the capacitance

PLL Synthesizer IC

OVERVIEW The SM5170AV is a PLL synthesizer IC developed for application in pagers. It incorporates independently-controlled reference frequency and FIN input frequency dividers, and operates from a low-voltage supply to realize low power dissipation. It features a charge pump that operates at 3 V

PLL Synthesizer IC

OVERVIEW The SM5170AV is a PLL synthesizer IC developed for application in pagers. It incorporates independently-controlled reference frequency and FIN input frequency dividers, and operates from a low-voltage supply to realize low power dissipation. It features a charge pump that operates at 3 V

VIF/SIF signal processor IC for TV and VCR

文件：21.52 Kbytes Page：1 Pages