ESD Protected, EMC Compliant, 3.3 V, 20 Mbps, EIA RS-485 Transceiver

GENERAL DESCRIPTION The ADM3485E is a 3.3 V, low power data transceiver with ±15 kV ESD protection, suitable for half-duplex communication on multipoint bus transmission lines. The ADM3485E is designed for balanced data transmission and complies with TIA/EIA standards RS­485 and RS-422. The ADM34

±15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver

FEATURES TIA/EIA RS-485/RS-422 compliant ±15 kV ESD protection on RS-485 input/output pins 12 Mbps data rate Half-duplex transceiver Up to 32 nodes on the bus Receiver open-circuit, fail-safe design Low power shutdown current Outputs high-Z when disabled or powered off Common-mode input range:

3.3 V、±15 kV ESD保护、RS-485/RS-422收发器（半双工、12Mbps、DE/RE）

ADM3485E是一款3.3 V低功耗数据收发器，提供±15 kV ESD保护，适用于多点总线传输线路的半双工通信。该器件针对平衡数据传输而设计，符合TIA/EIA标准RS-485和RS-422。ADM3485E是半双工收发器，驱动器和接收器共用差分线路，但各自具有独立的使能输入。 \n\n 该器件具有12 kΩ接收器输入阻抗，允许一条总线最多连接32个收发器。由于任一时间仅使能一个驱动器，因此禁用或关断驱动器的输出处于三态，避免总线过载。 \n\n 接收器具有故障安全特性，当输入浮地时，可确保输出保持逻辑高状态。热关断电路可防止总线竞争或输出短路导致功耗过大。 \n\n • 符合TIA/EIA RS-485/RS-422标准 \n\n• RS-485输入/输出引脚提供±15 kV ESD保护 \n\n• 数据速率：12 Mbps \n\n• 半双工收发器 \n\n• 总线上最多32个节点 \n\n• 接收器开路故障安全设计;

±15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver

FEATURES TIA/EIA RS-485/RS-422 compliant ±15 kV ESD protection on RS-485 input/output pins 12 Mbps data rate Half-duplex transceiver Up to 32 nodes on the bus Receiver open-circuit, fail-safe design Low power shutdown current Outputs high-Z when disabled or powered off Common-mode input range:

ESD Protected, EMC Compliant, 3.3 V, 20 Mbps, EIA RS-485 Transceiver

GENERAL DESCRIPTION The ADM3485E is a 3.3 V, low power data transceiver with ±15 kV ESD protection, suitable for half-duplex communication on multipoint bus transmission lines. The ADM3485E is designed for balanced data transmission and complies with TIA/EIA standards RS­485 and RS-422. The ADM34

ESD Protected, EMC Compliant, 3.3 V, 20 Mbps, EIA RS-485 Transceiver

GENERAL DESCRIPTION The ADM3485E is a 3.3 V, low power data transceiver with ±15 kV ESD protection, suitable for half-duplex communication on multipoint bus transmission lines. The ADM3485E is designed for balanced data transmission and complies with TIA/EIA standards RS­485 and RS-422. The ADM34

±15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver

FEATURES TIA/EIA RS-485/RS-422 compliant ±15 kV ESD protection on RS-485 input/output pins 12 Mbps data rate Half-duplex transceiver Up to 32 nodes on the bus Receiver open-circuit, fail-safe design Low power shutdown current Outputs high-Z when disabled or powered off Common-mode input range:

±15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver

FEATURES TIA/EIA RS-485/RS-422 compliant ±15 kV ESD protection on RS-485 input/output pins 12 Mbps data rate Half-duplex transceiver Up to 32 nodes on the bus Receiver open-circuit, fail-safe design Low power shutdown current Outputs high-Z when disabled or powered off Common-mode input range:

±15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver

FEATURES TIA/EIA RS-485/RS-422 compliant ±15 kV ESD protection on RS-485 input/output pins 12 Mbps data rate Half-duplex transceiver Up to 32 nodes on the bus Receiver open-circuit, fail-safe design Low power shutdown current Outputs high-Z when disabled or powered off Common-mode input range:

±15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver

FEATURES TIA/EIA RS-485/RS-422 compliant ±15 kV ESD protection on RS-485 input/output pins 12 Mbps data rate Half-duplex transceiver Up to 32 nodes on the bus Receiver open-circuit, fail-safe design Low power shutdown current Outputs high-Z when disabled or powered off Common-mode input range:

3.3V power supply, up to 256 nodes, 12Mbps half-duplex, RS485/RS422 transceiver

Features:  3.3V power supply, half-duplex;  1/8 unit load allows up to 256 devices on the bus;  Driver output short-circuit protection function;  Over temperature protection function;  Low power shutdown function;  Receiver open circuit protection function;  Strong anti-noise ability

丝印代码：3485E；Low-Power,Slew-Rate-Limited RS-485/RS-422 Transceivers

Features Fail-safe Circuitry Low Power Consumption Up to 256 Transceivers can be Attached to The Bus Maximum Transmission Rate: 10Mbps ESD: >+15kV SOP8 Package

±15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver

FEATURES TIA/EIA RS-485/RS-422 compliant ±15 kV ESD protection on RS-485 input/output pins 12 Mbps data rate Half-duplex transceiver Up to 32 nodes on the bus Receiver open-circuit, fail-safe design Low power shutdown current Outputs high-Z when disabled or powered off Common-mode input range:

±15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver

FEATURES TIA/EIA RS-485/RS-422 compliant ±15 kV ESD protection on RS-485 input/output pins 12 Mbps data rate Half-duplex transceiver Up to 32 nodes on the bus Receiver open-circuit, fail-safe design Low power shutdown current Outputs high-Z when disabled or powered off Common-mode input range:

짹15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver

文件：303.97 Kbytes Page：16 Pages

EIA RS-485/RS-422 Transceiver

文件：303.97 Kbytes Page：16 Pages

짹15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver

文件：303.97 Kbytes Page：16 Pages

짹15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver

文件：303.97 Kbytes Page：16 Pages

짹15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver

文件：303.97 Kbytes Page：16 Pages

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 包装：管件 描述：IC TRANSCEIVER HALF 1/1 8SOIC 集成电路（IC） 驱动器，接收器，收发器

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC TRANSCEIVER HALF 1/1 8SOIC 集成电路（IC） 驱动器，接收器，收发器

짹15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver

文件：303.97 Kbytes Page：16 Pages

짹15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver

文件：303.97 Kbytes Page：16 Pages

짹15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver

文件：303.97 Kbytes Page：16 Pages

3.3V POWERED, 15KV ESD PROTECTED, TRASMIT AT UP TO 12MBPS TRUE RS-485/RS-422 TRANSCEIVER

Description The ST3485E is ±15kV ESD protected, 3.3V low power transceiver for RS-485 and RS-422 communications. The device contains one driver and one receiver in half duplex configuration. The ST3485E transmits and receives at a guaranteed data rate of at least 12Mbps. General features

3.3V POWERED, 15KV ESD PROTECTED, TRASMIT AT UP TO 12MBPS TRUE RS-485/RS-422 TRANSCEIVER

Description The ST3485E is ±15kV ESD protected, 3.3V low power transceiver for RS-485 and RS-422 communications. The device contains one driver and one receiver in half duplex configuration. The ST3485E transmits and receives at a guaranteed data rate of at least 12Mbps. General features

Hysteretic PFET Buck Controller

文件：369.89 Kbytes Page：15 Pages

Hysteretic PFET Buck Controller

文件：369.89 Kbytes Page：15 Pages

Hysteretic PFET Buck Controller

文件：369.89 Kbytes Page：15 Pages