500 kbps, ESD Protected, Half-/Full-Duplex, iCoupler, Isolated RS-485 Transceiver

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

500 kbps, ESD Protected, Half-/Full-Duplex, iCoupler, Isolated RS-485 Transceiver

GENERAL DESCRIPTION The ADM2484E is an isolated data transceiver with ±15 kV ESD protection suitable for high speed, half- or full-duplex communication on multipoint transmission lines. For half-duplex operation, the transmitter outputs and receiver inputs share the same transmission line. Transm

5 kV信号隔离、ESD保护、500 kbps、全/半双工RS-485收发器

ADM2484E是一款隔离数据收发器，提供±15 kV ESD保护，适用于多点传输线路的高速、半双工或全双工通信。在半双工模式下，发射器输出与接收器输入共用同一传输线路。发射器输出引脚Y和Z分别在外部与接收器输入引脚A和B相连。\n\n ADM2484E针对平衡传输线路而设计，符合ANSI TIA/EIA RS-485-A-1998和ISO 8482:1987(E)标准。该器件采用ADI公司的 iCoupler® 技术，将3通道隔离器、三态差分线路驱动器和差分输入接收器集成于单封装中。\n\n 差分发射器输出和接收器输入具有静电放电电路 ， 可提供人体模型(HBM)±15 • 隔离RS-485/RS-422收发器，可配置为半双工或全双工\n\n• RS-485输入/输出引脚提供±15 kV ESD保护\n\n• 数据速率：500 kbps\n\n• 符合ANSI TIA/EIA RS-485-A-1998和ISO 8482:1987(E)标准\n\n• 工作电压(VDD1)：5 V或3.3 V\n\n• 高共模瞬变抗扰度：>25 kV/µs\n\n• 真故障保护接收器输入 \n\n• 总线上256个节点\n\n• 热关断保护;

500 kbps, ESD Protected, Half-/Full-Duplex, iCoupler, Isolated RS-485 Transceiver

GENERAL DESCRIPTION The ADM2484E is an isolated data transceiver with ±15 kV ESD protection suitable for high speed, half- or full-duplex communication on multipoint transmission lines. For half-duplex operation, the transmitter outputs and receiver inputs share the same transmission line. Transm

500 kbps, ESD Protected, Half-/Full-Duplex, iCoupler, Isolated RS-485 Transceiver

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

500 kbps, ESD Protected, Half-/Full-Duplex, iCoupler, Isolated RS-485 Transceiver

GENERAL DESCRIPTION The ADM2484E is an isolated data transceiver with ±15 kV ESD protection suitable for high speed, half- or full-duplex communication on multipoint transmission lines. For half-duplex operation, the transmitter outputs and receiver inputs share the same transmission line. Transm

500 kbps, ESD Protected, Half-/Full-Duplex, iCoupler, Isolated RS-485 Transceiver

GENERAL DESCRIPTION The ADM2484E is an isolated data transceiver with ±15 kV ESD protection suitable for high speed, half- or full-duplex communication on multipoint transmission lines. For half-duplex operation, the transmitter outputs and receiver inputs share the same transmission line. Transm

500 kbps, ESD Protected, Half-/Full-Duplex, iCoupler, Isolated RS-485 Transceiver

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

Digital Isolator Product Selection and Resource Guide

文件：738.14 Kbytes Page：4 Pages

NPN EPITAXIAL PLANAR TRANSISTOR

Description Low Noise Transistor.

丝印代码：1U；Low Noise Transistor

Low Noise Transistor

NPN General Purpose Amplifier

NPN General Purpose Amplifier This device is designed for low noise, high gain, general purpose amplifier applications at collector currents from 1µ to 50 mA. Sourced from Process 07. See 2N5088 for characteristics.

NPN General Purpose Amplifier

NPN General Purpose Amplifier This device is designed for low noise, high gain, general purpose amplifier applications at collector currents from 1µ to 50 mA. Sourced from Process 07. See 2N5088 for characteristics.

DIRECT QUADRATURE MODULATOR

Product Description The RF2484 is a monolithic integrated quadrature modulator IC capable of universal direct modulation for highfrequency AM, PM, or compound carriers. This low-cost IC features excellent linearity, noise floor, and over-temperature carrier suppression performance. The device imp