2.5 kV Isolated RS-485 Transceivers with Integrated Transformer Driver

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

2.5 kV Isolated RS-485 Transceivers with Integrated Transformer Driver

GENERAL DESCRIPTION The ADM2482E/ADM2487E are isolated data transceivers with ±15 kV ESD protection and are suitable for high speed, half-duplex or full-duplex communication on multipoint transmission lines. For half-duplex operation, the transmitter outputs and receiver inputs share the same tra

2.5 kV信号隔离、ESD保护、全/半双工RS-485收发器，内置变压驱动器(16 Mbps)

ADM2482E/ADM2487E均为隔离数据收发器，提供±15 kV ESD保护，适用于多点传输线路的高速、半双工或全双工通信。在半双工模式下，发射器输出与接收器输入共用同一传输线路。发射器输出引脚Y和Z分别在外部与接收器输入引脚A和B相连。这些器件针对平衡传输线路而设计，符合TIA/EIA-485-A-98和ISO 8482:1987(E)标准。\n\n 上述器件采用ADI公司的iCoupler® 技术，将3通道隔离器、三态差分线路驱动器和差分输入接收器集成于单封装中。片内振荡器输出一对方波，以驱动外部变压器提供隔离电源。器件逻辑端可以采用5 V或3.3 V电源供电，总线端则采用 • 隔离式RS-485/RS-422收发器，可配置为半双工或全双工\n\n• 集成可驱动外部变压器的振荡器\n\n• RS485输入/输出引脚提供±15 kV ESD保护\n\n• 符合TIA/EIA-485-A-98和ISO 8482:1987(E)标准\n\n• 数据速率：16 Mbps\n\n• 5 V或3.3 V工作电压(VDD1)\n\n• 总线支持256个节点\n\n• 真故障保护接收器输入\n\n• 安全和法规认证\n• UL认证：1分钟2500 V rms，符合UL 1577\n\n• VDE合格证书\n• DIN VVDE V 0884-10 (VDE V 0884-10):;

Digital Isolator Product Selection and Resource Guide

文件：738.14 Kbytes Page：4 Pages

2.5 kV Isolated RS-485 Transceivers with Integrated Transformer Driver

GENERAL DESCRIPTION The ADM2482E/ADM2487E are isolated data transceivers with ±15 kV ESD protection and are suitable for high speed, half-duplex or full-duplex communication on multipoint transmission lines. For half-duplex operation, the transmitter outputs and receiver inputs share the same tra

2.5 kV Isolated RS-485 Transceivers with Integrated Transformer Driver

FEATURES ► Isolated RS-485/RS-422 transceivers, configurable as half duplex or full duplex ► Integrated oscillator driver for external transformer ► ±15 kV ESD protection on RS-485 input/output pins ► Complies with TIA/EIA-485-A-98 and ISO 8482:1987(E) ► Data rate: 500 kbps/16 Mbps ► 5 V or

2.5 kV Isolated RS-485 Transceivers with Integrated Transformer Driver

FEATURES ► Isolated RS-485/RS-422 transceivers, configurable as half duplex or full duplex ► Integrated oscillator driver for external transformer ► ±15 kV ESD protection on RS-485 input/output pins ► Complies with TIA/EIA-485-A-98 and ISO 8482:1987(E) ► Data rate: 500 kbps/16 Mbps ► 5 V or

2.5 kV Isolated RS-485 Transceivers with Integrated Transformer Driver

GENERAL DESCRIPTION The ADM2482E/ADM2487E are isolated data transceivers with ±15 kV ESD protection and are suitable for high speed, half-duplex or full-duplex communication on multipoint transmission lines. For half-duplex operation, the transmitter outputs and receiver inputs share the same tra

2.5 kV Isolated RS-485 Transceivers with Integrated Transformer Driver

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

2.5 kV Isolated RS-485 Transceivers with Integrated Transformer Driver

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

2.5 kV Isolated RS-485 Transceivers with Integrated Transformer Driver

GENERAL DESCRIPTION The ADM2482E/ADM2487E are isolated data transceivers with ±15 kV ESD protection and are suitable for high speed, half-duplex or full-duplex communication on multipoint transmission lines. For half-duplex operation, the transmitter outputs and receiver inputs share the same tra

2.5 kV Isolated RS-485 Transceivers with Integrated Transformer Driver

FEATURES ► Isolated RS-485/RS-422 transceivers, configurable as half duplex or full duplex ► Integrated oscillator driver for external transformer ► ±15 kV ESD protection on RS-485 input/output pins ► Complies with TIA/EIA-485-A-98 and ISO 8482:1987(E) ► Data rate: 500 kbps/16 Mbps ► 5 V or

NPN SILICON EPITAXIAL TRANSISTOR

NPN SILICON EPITAXIAL TRANSISTOR High Voltage Switching & Amplifier Applications

NPN SILICON PLANAR EPITAXIAL TRANSISTOR

NPN SILICON PLANAR EPITAXIAL TRANSISTOR High Voltage Switching and Amplifier Applications CTV Horizontal Driver and Chroma Output Applications

Easy-to-Use, Ultra-Tiny, Differential, 16-Bit ADC With I2C Interface

文件：290.61 Kbytes Page：16 Pages

Automotive Lamp Outage Monitor

文件：151.88 Kbytes Page：11 Pages