Half-Duplex, iCoupler Isolated RS-485 Transceiver

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

Half-Duplex, iCoupler Isolated RS-485 Transceiver

GENERAL DESCRIPTION The ADM2481 differential bus transceiver is an integrated, galvanically isolated component designed for bidirectional data communication on balanced, multipoint bus transmission lines. It complies with ANSI EIA/TIA-485-A and ISO 8482: 1987(E). Using iCoupler® technology from A

2.5 kV 信号隔离、500 kbps、半双工RS-485收发器

ADM2481 差分总线收发器是一款集成式电流隔离器件，适用于平衡多点总线传输线路的双向数据通信。它符合ANSI EIA/TIA-485-A和ISO 8482: 1987(E)标准。该器件采用ADI公司的 iCoupler® 技术，将3通道隔离器、三态差分线路驱动器和差分输入接收器集成于单封装中。器件逻辑端采用5 V或3 V电源供电，总线端则采用5 V电源供电。\n\n 的压摆率受限，以便减少端接不当的传输线路所引起的反射。受控的压摆率将数据速率限制在500 kbps。该器件的输入阻抗为96 kΩ，允许总线上最多连接256个收发器。其驱动器具有高电平有效使能特性。驱动器差分输出与接收 • 集成电气数据隔离的RS-485收发器 \n\n• 符合ANSI TIA/EIA-485-A和ISO 8482:1987(E)标准 \n\n• 数据速率：500 kbps \n\n• 限摆率驱动器输出;

Digital Isolator Product Selection and Resource Guide

文件：738.14 Kbytes Page：4 Pages

Half-Duplex, iCoupler Isolated RS-485 Transceiver

GENERAL DESCRIPTION The ADM2481 differential bus transceiver is an integrated, galvanically isolated component designed for bidirectional data communication on balanced, multipoint bus transmission lines. It complies with ANSI EIA/TIA-485-A and ISO 8482: 1987(E). Using iCoupler® technology from A

Half-Duplex, iCoupler Isolated RS-485 Transceiver

GENERAL DESCRIPTION The ADM2481 differential bus transceiver is an integrated, galvanically isolated component designed for bidirectional data communication on balanced, multipoint bus transmission lines. It complies with ANSI EIA/TIA-485-A and ISO 8482: 1987(E). Using iCoupler® technology from A

Half-Duplex, iCoupler Isolated RS-485 Transceiver

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

Half-Duplex, iCoupler Isolated RS-485 Transceiver

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

Half-Duplex, iCoupler Isolated RS-485 Transceiver

GENERAL DESCRIPTION The ADM2481 differential bus transceiver is an integrated, galvanically isolated component designed for bidirectional data communication on balanced, multipoint bus transmission lines. It complies with ANSI EIA/TIA-485-A and ISO 8482: 1987(E). Using iCoupler® technology from A

AMU2481VS

文件：2.21607 Mbytes Page：27 Pages

Programmable Four-Channel Communications Controller

文件：2.28312 Mbytes Page：222 Pages

145V Triple Bias Clamp

文件：451.96 Kbytes Page：8 Pages

Easy-to-Use, Ultra-Tiny 16-Bit ADC

文件：206.1 Kbytes Page：20 Pages

Automotive Lamp Outage Monitor

文件：151.88 Kbytes Page：11 Pages