0.1 uF, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xx family of line drivers/receivers is intended for all EIA-232-E and V.28 communications interfaces, especially in applications where ±12 V is not available. The ADM205, ADM206, ADM211 and ADM213 feature a low power shutdown mode which reduces power dissipation to les

0.1 關F, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xx family of line drivers/receivers is intended for all EIA-232-E and V.28 communications interfaces, especially in applications where ±12 V is not available. The ADM206, ADM211, and ADM213 feature a low power shutdown mode that reduces power dissipation to less than 5

0.1 μF, 5 V Powered CMOS RS-232 Drivers/Receivers

FEATURES 0.1 μF to 10 μF capacitors 120 kB/s data rate Two receivers active in shutdown (ADM213) On-board dc-to-dc converters ±9 V output swing with 5 V supply Low power (15 mW) Low power shutdown ≤ 5 μW ±30 V receiver input levels Latch-up free Pin compatible to MAX206-211/213 APPLIC

0.1 µF、+5V CMOS RS-232 200kBPS收发器，具有4个驱动器、5个接收器、关断引脚和使能引脚，关断期间2个接收器保持活动

ADM2xx系列线路驱动器/接收器主要用于所有EIA-232-E和V.28通信接口，尤其是无法提供±12 V电源的应用。ADM205、ADM211和ADM213具有低功耗关断模式，可将功耗降至5 µW以下，因此非常适合电池供电设备使用。ADM205不需要任何外部器件，特别适合印刷电路板空间受限的应用。ADM213具有低电平有效关断和高电平有效接收器使能控制功能。关断期间，ADM213的两个接收器仍保持活动状态。此特性适用于振铃指示监控。\n\n 除ADM209外，ADM2xx系列的所有器件均内置两个电荷泵电压转换器，可以采用+5 V单电源供电。这些转换器能够将+5 V输入电压转换为R • 电容：0.1 µF至10 µF\n\n• 数据速率：120 kB/s\n\n• 关断期间两个接收器为活动状态(ADM213)\n\n• 片上DC-DC转换器\n\n• 输出摆幅：±9 V（5 V电源）;

0.1 μF, 5 V Powered CMOS RS-232 Drivers/Receivers

FEATURES 0.1 μF to 10 μF capacitors 120 kB/s data rate Two receivers active in shutdown (ADM213) On-board dc-to-dc converters ±9 V output swing with 5 V supply Low power (15 mW) Low power shutdown ≤ 5 μW ±30 V receiver input levels Latch-up free Pin compatible to MAX206-211/213 APPLIC

0.1 關F, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xx family of line drivers/receivers is intended for all EIA-232-E and V.28 communications interfaces, especially in applications where ±12 V is not available. The ADM206, ADM211, and ADM213 feature a low power shutdown mode that reduces power dissipation to less than 5

0.1 uF, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xx family of line drivers/receivers is intended for all EIA-232-E and V.28 communications interfaces, especially in applications where ±12 V is not available. The ADM205, ADM206, ADM211 and ADM213 feature a low power shutdown mode which reduces power dissipation to les

0.1 muF, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

0.1 muF, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

0.1 muF, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

0.1 uF, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xx family of line drivers/receivers is intended for all EIA-232-E and V.28 communications interfaces, especially in applications where ±12 V is not available. The ADM205, ADM206, ADM211 and ADM213 feature a low power shutdown mode which reduces power dissipation to les

0.1 關F, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xx family of line drivers/receivers is intended for all EIA-232-E and V.28 communications interfaces, especially in applications where ±12 V is not available. The ADM206, ADM211, and ADM213 feature a low power shutdown mode that reduces power dissipation to less than 5

0.1 μF, 5 V Powered CMOS RS-232 Drivers/Receivers

FEATURES 0.1 μF to 10 μF capacitors 120 kB/s data rate Two receivers active in shutdown (ADM213) On-board dc-to-dc converters ±9 V output swing with 5 V supply Low power (15 mW) Low power shutdown ≤ 5 μW ±30 V receiver input levels Latch-up free Pin compatible to MAX206-211/213 APPLIC

0.1 μF, 5 V Powered CMOS RS-232 Drivers/Receivers

FEATURES 0.1 μF to 10 μF capacitors 120 kB/s data rate Two receivers active in shutdown (ADM213) On-board dc-to-dc converters ±9 V output swing with 5 V supply Low power (15 mW) Low power shutdown ≤ 5 μW ±30 V receiver input levels Latch-up free Pin compatible to MAX206-211/213 APPLIC

0.1 關F, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xx family of line drivers/receivers is intended for all EIA-232-E and V.28 communications interfaces, especially in applications where ±12 V is not available. The ADM206, ADM211, and ADM213 feature a low power shutdown mode that reduces power dissipation to less than 5

0.1 muF, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

0.1 muF, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

0.1 關F, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xx family of line drivers/receivers is intended for all EIA-232-E and V.28 communications interfaces, especially in applications where ±12 V is not available. The ADM206, ADM211, and ADM213 feature a low power shutdown mode that reduces power dissipation to less than 5

0.1 μF, 5 V Powered CMOS RS-232 Drivers/Receivers

FEATURES 0.1 μF to 10 μF capacitors 120 kB/s data rate Two receivers active in shutdown (ADM213) On-board dc-to-dc converters ±9 V output swing with 5 V supply Low power (15 mW) Low power shutdown ≤ 5 μW ±30 V receiver input levels Latch-up free Pin compatible to MAX206-211/213 APPLIC

0.1 μF, 5 V Powered CMOS RS-232 Drivers/Receivers

FEATURES 0.1 μF to 10 μF capacitors 120 kB/s data rate Two receivers active in shutdown (ADM213) On-board dc-to-dc converters ±9 V output swing with 5 V supply Low power (15 mW) Low power shutdown ≤ 5 μW ±30 V receiver input levels Latch-up free Pin compatible to MAX206-211/213 APPLIC

0.1 關F, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xx family of line drivers/receivers is intended for all EIA-232-E and V.28 communications interfaces, especially in applications where ±12 V is not available. The ADM206, ADM211, and ADM213 feature a low power shutdown mode that reduces power dissipation to less than 5

0.1 muF, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

0.1 關F, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xx family of line drivers/receivers is intended for all EIA-232-E and V.28 communications interfaces, especially in applications where ±12 V is not available. The ADM206, ADM211, and ADM213 feature a low power shutdown mode that reduces power dissipation to less than 5

0.1 μF, 5 V Powered CMOS RS-232 Drivers/Receivers

FEATURES 0.1 μF to 10 μF capacitors 120 kB/s data rate Two receivers active in shutdown (ADM213) On-board dc-to-dc converters ±9 V output swing with 5 V supply Low power (15 mW) Low power shutdown ≤ 5 μW ±30 V receiver input levels Latch-up free Pin compatible to MAX206-211/213 APPLIC

0.1 μF, 5 V Powered CMOS RS-232 Drivers/Receivers

FEATURES 0.1 μF to 10 μF capacitors 120 kB/s data rate Two receivers active in shutdown (ADM213) On-board dc-to-dc converters ±9 V output swing with 5 V supply Low power (15 mW) Low power shutdown ≤ 5 μW ±30 V receiver input levels Latch-up free Pin compatible to MAX206-211/213 APPLIC

0.1 關F, 5 V Powered CMOS RS-232 Drivers/Receivers

GENERAL DESCRIPTION The ADM2xx family of line drivers/receivers is intended for all EIA-232-E and V.28 communications interfaces, especially in applications where ±12 V is not available. The ADM206, ADM211, and ADM213 feature a low power shutdown mode that reduces power dissipation to less than 5

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC Compliant, -15 kV ESD Protected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC兼容、15 kV ESD保护、RS-232线路驱动器/接收器

ADM213E属于稳定可靠的RS-232和V.28系列接口器件，采用+5 V单电源供电。这些产品均适用于恶劣的电气工作环境，并且符合欧盟EMC指令(89/336/EEC)要求。辐射水平和抗扰度均符合要求。电磁抗扰度包括：所有I/O线路均提供±15 kV以上ESD保护(1000-4-2)，快速瞬变脉冲保护(1000-4-4)，以及辐射抗扰度(1000-4-3)。电磁辐射包括信息技术设备标准EN55022 CISPR22所规定的辐射发射和传导发射。 \n\n 所有器件均完全符合EIA-232E和CCITT V.28规范，数据速率最高可达230 kbps。 \n\n 一些产品提供 • Complies with 89/336/EEC EMC directive \n\n• ESD protection to IEC 1000-4-2 (801-2) Contact discharge: ±8 kV Air-gap discharge: ±15 kV Human body model: ±15 kV \n\n• EFT/burst immunity (IEC 1000-4-4) \n\n• Low EMI emissions (EN 55022);

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC Compliant, -15 kV ESD Protected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC Compliant, -15 kV ESD Protected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC Compliant, -15 kV ESD Protected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE

EMI/EMC-Compliant, 짹15 kV ESDProtected, RS-232 Line Drivers/Receivers

GENERAL DESCRIPTION The ADM2xxE is a family of robust RS-232 and V.28 interface devices that operate from a single 5 V power supply. These products are suitable for operation in harsh electrical environments and are compliant with the EU directive on electromagnetic compatibility (EMC) (89/336/EE