2.3 GHz to 2.4 GHz WiMAX Power Amplifier

GENERAL DESCRIPTION The ADL5570 is a high linearity 2.3 GHz to 2.4 GHz power amplifier designed for WiMAX terminals using TDD operation at a duty cycle of 31. With a gain of 29 dB and an output compression point of 31 dBm at 2.35 GHz, it can operate at an output power level up to 26 dBm while mai

2.3 GHz 至2.4 GHz WiMAX功率放大器

ADL5570是一款高线性度2.3 GHz至2.4 GHz功率放大器，专为使用TDD、运行在31%占空比的WiMAX终端而设计。它增益为29 dB，输出压缩点为31 dBm（2.35 GHz），可在最高26 dBm的输出功率下工作而依然维持EVM ≤3% （OFDM 16或64 QAM），采用3.5 V电源供电，PAE为20%（POUT = 25 dBm）。 \n可片内匹配ADL5570的射频输入，并提供低于-10 dB的输入回损。采用带状线和外部并联电容可片外匹配开集输出。 \nADL5570采用3.2 V至4.2 V电源供电，当提供25 dBm时供电电流为440 m 固定增益：29 dB\n工作电压范围：2.3 GHz至2.4 GHz \nEVM ≤ 3%（POUT = 25 dBm，16 QAM OFDMA） \n静态电流\n130 mA（高功率模式）\n70 mA（低功率模式）\n输入内部匹配50 Ω \n电源：3.2 V至4.2 V \n功率附加效率（PAE）： 20% \n多种工作模式以减少电池消耗 \n低功率模式：100 mA\n待机模式：1 mA\n休眠模式：<1 μA;

WiMAX Power Amplifier

文件：355.01 Kbytes Page：12 Pages

封装/外壳：16-VQFN 裸露焊盘，CSP 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC AMP WIMAX 2.4GHZ 16LFCSP RF/IF，射频/中频和 RFID 射频放大器

Brushless DC motor controller

DESCRIPTION The NE/SA/SE5570 is a three-phase brushless DC motor controller with a microprocessor-compatible serial input data port; 8-bit monotonic digital-to-analog converter; PWM comparator; oscillator; three Hall sensor inputs and six source/sink phase pre-drivers. FEATURES • 8-bit DAC •

Brushless DC motor controller

DESCRIPTION The NE/SA/SE5570 is a three-phase brushless DC motor controller with a microprocessor-compatible serial input data port; 8-bit monotonic digital-to-analog converter; PWM comparator; oscillator; three Hall sensor inputs and six source/sink phase pre-drivers. FEATURES • 8-bit DAC •

Silicon Controlled Rectifier for Phase Control Applications

Silicon Controlled Rectifier for Phase Control Applications

Brushless DC motor controller

DESCRIPTION The NE/SA/SE5570 is a three-phase brushless DC motor controller with a microprocessor-compatible serial input data port; 8-bit monotonic digital-to-analog converter; PWM comparator; oscillator; three Hall sensor inputs and six source/sink phase pre-drivers. FEATURES • 8-bit DAC •

Brushless DC motor controller

DESCRIPTION The NE/SA/SE5570 is a three-phase brushless DC motor controller with a microprocessor-compatible serial input data port; 8-bit monotonic digital-to-analog converter; PWM comparator; oscillator; three Hall sensor inputs and six source/sink phase pre-drivers. FEATURES • 8-bit DAC •