RF/IF Vector Multiplier

GENERAL DESCRIPTION The ADL5390 vector multiplier consists of a matched pair of broadband variable gain amplifiers whose outputs are summed. The separate gain controls for each amplifier are linear-inmagnitude. If the two input RF signals are in quadrature, the vector multiplier can be configured

300 MHz to 1000 MHz Quadrature Modulator

GENERAL DESCRIPTION The ADL5370 is the first in the fixed-gain quadrature modulator (F-MOD) family designed for use from 300 MHz to 1000 MHz. Its excellent phase accuracy and amplitude balance enable high performance intermediate frequency or direct radio frequency modulation for communication sy

400 MHz to 6 GHz Broadband Quadrature Modulator

GENERAL DESCRIPTION The ADL5375 is a broadband quadrature modulator designed for operation from 400 MHz to 6 GHz. Its excellent phase accuracy and amplitude balance enable high performance intermediate frequency or direct radio frequency modulation for communication systems. FEATURES Outpu

RF矢量乘法器

ADL5390矢量乘法器由一对匹配的宽带可变增益放大器组成，二者输出相加，每个放大器具有单独的线性幅度增益控制。如果两个输入RF信号正交，则可以将该矢量乘法器配置为矢量调制器，或将增益控制引脚用作笛卡尔变量，将其配置为可变衰减器/移相器。这种情况下，输出振幅可以控制在最大+5 dB至-30 dB以下的范围内，相位可以在整个360°范围内连续调整。由于信号路径为线性，因此输入的原始调制得以保留。如果两个信号是独立的，则该矢量乘法器可以充当一个2:1多路复用器，或提供从一个通道至另一个通道的衰落。\n\n ADL5390可以在20 MHz至2400 MHz的宽频率范围内工作。当一个通道设 • 工作频率范围：20 MHz至2.4 GHz\n\n• 连续幅度控制范围：+5 dB至-30 dB\n\n• 笛卡尔I/Q基带频率范围：DC至230 MHz\n\n• 输出三阶交调截点：+24 dBm;

RF/IF Vector Multiplier

文件：681.08 Kbytes Page：23 Pages

RF/IF Vector Multiplier

GENERAL DESCRIPTION The ADL5390 vector multiplier consists of a matched pair of broadband variable gain amplifiers whose outputs are summed. The separate gain controls for each amplifier are linear-inmagnitude. If the two input RF signals are in quadrature, the vector multiplier can be configured

RF/IF Vector Multiplier

GENERAL DESCRIPTION The ADL5390 vector multiplier consists of a matched pair of broadband variable gain amplifiers whose outputs are summed. The separate gain controls for each amplifier are linear-inmagnitude. If the two input RF signals are in quadrature, the vector multiplier can be configured

RF/IF Vector Multiplier

GENERAL DESCRIPTION The ADL5390 vector multiplier consists of a matched pair of broadband variable gain amplifiers whose outputs are summed. The separate gain controls for each amplifier are linear-inmagnitude. If the two input RF signals are in quadrature, the vector multiplier can be configured

RF/IF Vector Multiplier

文件：733.39 Kbytes Page：24 Pages

RF/IF Vector Multiplier

文件：681.08 Kbytes Page：23 Pages

RF/IF Vector Multiplier

文件：681.08 Kbytes Page：23 Pages

RF/IF Vector Multiplier

文件：681.08 Kbytes Page：23 Pages

封装/外壳：24-VFQFN 裸露焊盘，CSP 功能：RF/IF 矢量倍频器 包装：卷带（TR） 描述：IC MULTIPLIER RF VECTOR 24-LFCSP RF/IF，射频/中频和 RFID RF 其它 IC 和模块

包装：盒 描述：BOARD EVALUATION ADL5390 开发板，套件，编程器 射频评估和开发套件，开发板

RF/IF Vector Multiplier

文件：681.08 Kbytes Page：23 Pages

8-/16-Channel, 3 V/5 V, Serial Input, Single- Supply, 12-/14-Bit Voltage Output DACs

GENERAL DESCRIPTION The AD5390/AD5391 are complete single-supply, 16-channel, 14-bit and 12-bit DACs, respectively. The AD5392 is a complete single-supply, 8-channel, 14-bit DAC. Devices are available both in 64-lead LFCSP and 52-lead LQFP packages. All channels have an on-chip output amplifier w

24-30GHz Medium Power Amplifier

Description The CHA5390 is a high gain broadband four stage monolithic medium power amplifier. It is designed for a wide range of applications, from military to commercial communication systems. The backside of the chip is both RF and DC grounded. This helps simplify the assembly process. Main F

24-30GHz Medium Power Amplifier

Description The monolithic microwave IC (MMIC) in the package is a high gain broadband four stage monolithic medium power amplifier. It is designed for a wide range of applications, from military to commercial communication systems. The circuit is manufactured with a PM-HEMT process, 0.25µm gate

10 Gbit/s Physical Layer Device for POS, ATM and Ethernet

GENERAL DESCRIPTION • The S/UNI-9953 is a single chip ATM, POS and 10 Gigabit Ethernet User Network Interface operating at 9953.28 Mbit/s and 10.3 Gbit/s. The S/UNI 9953 is intended for use in OC-192c and high-density OC-48c POS/ATM applications as well as 10 Gigabit Ethernet WAN and LAN PHY port