CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux

GENERAL DESCRIPTION The ADG774 is a monolithic CMOS device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet gives high switching speed and low on resistance. The on resistance variation is typically less than 0.5 Ω wit

2.2 Ω、宽带宽、低压、四通道单刀双掷开关

ADG774是一款单芯片CMOS器件，内置四个2:1多路复用器/解复用器，提供高阻抗输出。它采用CMOS工艺设计，具有低功耗、高开关速度和低导通电阻特性。导通电阻变化通常小于0.5 Ω，输入信号范围为0 V至5 V。带宽大于200 MHz，而且具有低失真（典型值为0.5%）性能，因而适合快速以太网信号切换应用。导通电阻曲线在整个模拟输入范围都非常平坦，可确保切换音频信号时拥有出色的线性度和低失真性能。较快的开关速度及高信号带宽，使之也适合视频信号切换应用。CMOS结构可确保功耗极低，因而这种器件非常适合便携式和电池供电仪表。 • 低插入损耗和导通电阻：2.2 Ω（典型值）\n\n• 导通电阻平坦度：< 2 Ω\n\n• 带宽：> 200 MHz\n\n• 3 V/5 V单电源供电;

低压、400 MHz、四通道2:1多路复用器，开关时间为3 ns

ADG774A是一款单芯片CMOS器件，内置四个2:1多路复用器/解复用器，提供高阻抗输出。它采用CMOS工艺设计，具有低功耗、高开关速度和低导通电阻特性。在输入信号范围内，导通电阻变化通常小于0.5 Ω。\n\n ADG774A带宽典型值为400 MHz，而且具有低失真（典型值为0.3%）性能，因而适合高速数据信号切换应用。\n\n 导通电阻曲线在整个模拟输入范围都非常平坦，可确保拥有出色的线性度和低失真性能。CMOS结构确保其功耗极低。\n\n ADG774A采用3.3 V/5 V单电源供电，并且与TTL逻辑兼容。各开关的控制逻辑参见真值表。\n\n • 带宽：> 400 MHz\n\n• 低插入损耗和导通电阻：2.2 Ω（典型值）\n\n• 导通电阻平坦度：0.3 Ω（典型值）\n\n• 3 V/5 V单电源供电\n\n• 极低失真：< 0.3% \n\n• 低静态电源电流： 1 nA（典型值）\n\n• 快速开关时间\n• 接通时间tON： 6 ns\n\n• 断开时间tOFF： 3 ns \n\n\n\n\n• TTL/CMOS 兼容型\n\n• 无铅封装\n• 16引脚QSSOP封装\n\n• 16引脚3 mm × 3 mm LFCSP;

Low Voltage 400 MHz Quad 2:1 Mux with 3 ns Switching Time

GENERAL DESCRIPTION The ADG774A is a monolithic CMOS device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet offers high switching speed and low on resistance. The on resistance variation is typically less than 0.5 Ω o

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time

GENERAL DESCRIPTION The ADG774A is a monolithic CMOS device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet offers high switching speed and low on resistance. The on resistance variation is typically less than 0.5 Ω o

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time

GENERAL DESCRIPTION The ADG774A is a monolithic CMOS device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet offers high switching speed and low on resistance. The on resistance variation is typically less than 0.5 Ω o

Low Voltage 400 MHz Quad 2:1 Mux with 3 ns Switching Time

GENERAL DESCRIPTION The ADG774A is a monolithic CMOS device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet offers high switching speed and low on resistance. The on resistance variation is typically less than 0.5 Ω o

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time

GENERAL DESCRIPTION The ADG774A is a monolithic CMOS device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet offers high switching speed and low on resistance. The on resistance variation is typically less than 0.5 Ω o

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time

GENERAL DESCRIPTION The ADG774A is a monolithic CMOS device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet offers high switching speed and low on resistance. The on resistance variation is typically less than 0.5 Ω o

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time

GENERAL DESCRIPTION The ADG774A is a monolithic CMOS device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet offers high switching speed and low on resistance. The on resistance variation is typically less than 0.5 Ω o

CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux

GENERAL DESCRIPTION The ADG774 is a monolithic CMOS device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet gives high switching speed and low on resistance. The on resistance variation is typically less than 0.5 Ω wit

CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux

GENERAL DESCRIPTION The ADG774 is a monolithic CMOS device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet gives high switching speed and low on resistance. The on resistance variation is typically less than 0.5 Ω wit

CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux

GENERAL DESCRIPTION The ADG774 is a monolithic CMOS device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet gives high switching speed and low on resistance. The on resistance variation is typically less than 0.5 Ω wit

CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux

GENERAL DESCRIPTION The ADG774 is a monolithic CMOS device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet gives high switching speed and low on resistance. The on resistance variation is typically less than 0.5 Ω wit

Wide Bandwidth Quad 2:1 Mux

文件：140.99 Kbytes Page：12 Pages

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time

文件：371.88 Kbytes Page：16 Pages

Complete 12-Bit A/D Converters

PRODUCT DESCRIPTION The AD674B and AD774B are complete 12-bit successive approximation analog-to-digital converters with three-state output buffer circuitry for direct interface to 8- and 16-bit microprocessor busses. A high-precision voltage reference and clock are included on chip, and the ci

Complete 12-Bit A/D Converters

PRODUCT DESCRIPTION The AD674B and AD774B are complete 12-bit successive approximation analog-to-digital converters with three-state output buffer circuitry for direct interface to 8- and 16-bit microprocessor busses. A high-precision voltage reference and clock are included on chip, and the ci

TOPLED RG Super-Bright, Hyper-Red GaAIAs-LED

Features ● color of package: white ● double heterojunction in GaAIAs technology ● superior luminous intensity ● for use as optical indicator ● for backlighting, optical coupling into light pipes and lenses ● suitable for all SMT assembly and soldering methods ● available taped on reel (12 m

12-Bit Sampling A/D Converters

DESCRIPTION… The SP574B/674B/1674B/774B (SPx74B) Series are complete 12–bit successive–approximation A/D converters integrated on a single die with tri-state output latches, an internal reference, clock and a sample–hold. The new “B–Series” features true Nyquist sampling while maintaining compati