CMOS Low Voltage 2ohm SPST Switches in SC70 Packages

GENERAL DESCRIPTION The ADG741/ADG742 are monolithic CMOS SPST switches. These switches are designed using an advanced submicron process that provides low power dissipation, yet offers high switching speed, low on resistance, and low leakage currents. In addition, −3 dB bandwidths of greater tha

CMOS、低压、单刀单掷常闭(NC)开关，采用SC-70封装

ADG742是一款单芯片CMOS单刀单掷（SPST）开关。它采用先进的亚微米工艺设计，具有低功耗、高开关速度、低导通电阻和低泄漏电流特性，-3 dB带宽可以达到200 MHz以上。\n\n ADG742可以采用1.8 V至5.5 V单电源供电，非常适合用在电池供电仪表中，以及配合Analog Devices, Inc.（简称ADI）的新一代DAC和ADC使用。 • 单电源：1.8 V至5.5 V\n\n• 导通电阻：2 Ω（典型值）\n\n• 低导通电阻平坦度\n\n• -3 dB带宽：> 200 MHz;

CMOS Low Voltage

文件：315 Kbytes Page：12 Pages

低电压故障保护和检测、12 Ω RON、双路 SPST 开关

ADG7421F 是一款低电压、双单刀单掷 (SPST) 低导通电阻开关，在源极引脚上具有过压保护、掉电保护和过压检测功能。\n\n 当没有电源时，开关保持关闭状态，开关输入为高阻抗。上电时，如果任何一个 Sx 引脚上的模拟输入信号电平超过 VDD 或 VSS 的阈值电压 VT，该开关自动关闭，数字 FF（故障标志）引脚下降到逻辑低电平，以指示故障。\n\n 在通电和断电条件下，相对接地电压高达 +60 V 或 −60 V 的输入信号电平都将被屏蔽。开关通过逻辑 1 输入打开，并且在两个方向上的导电性能相同，对于 5 V 单电源，模拟信号范围为 VSS + 0.1 V 至 • S1 和 S2 引脚上的过压保护电压高达 ±60 V\n\n• S1 和 S2 引脚上的掉电保护电压高达 ±60 V\n\n• S1 和 S2 引脚上提供过压检测\n\n• 无需数字输入即可输出已知状态\n\n• 低导通电阻：12 Ω（典型值）;

CMOS Low Voltage 2ohm SPST Switches in SC70 Packages

GENERAL DESCRIPTION The ADG741/ADG742 are monolithic CMOS SPST switches. These switches are designed using an advanced submicron process that provides low power dissipation, yet offers high switching speed, low on resistance, and low leakage currents. In addition, −3 dB bandwidths of greater tha

CMOS Low Voltage

文件：315 Kbytes Page：12 Pages

Low Voltage Fault Protection and Detection, 12 廓 RON, Dual SPST Switch

文件：1.96678 Mbytes Page：30 Pages

Low Voltage Fault Protection and Detection, 12 廓 RON, Dual SPST Switch

文件：1.96678 Mbytes Page：30 Pages

EPITAXIAL PLANAR PNP TRANSISTOR (SWITCHING, INTERFACE CIRCUIT AND DRIVER CIRCUIT)

SWITCHING APPLICATION. INTERFACE CIRCUIT AND DRIVER CIRCUIT APPLICATION FEATURES ● With Built-in Bias Resistors. ● Simplify Circuit Design. ● Reduce a Quantity of Parts and Manufacturing Process.

Integrated Circuit TV Sound Channel, 2W

Description: The NTE742 is designed for use as the entire sound function in television receivers or FM table radios. The NTE742 sound channel will directly drive a 16 ohm speaker with more than 2 watts output. This monolithic integrated circuit will operate from a single 18V to 28V power supply a

SILICON GATE ENHANCEMENT MODE RF POWER VDMOS TRANSISTOR

General Description Silicon VDMOS and LDMOS transistors designed specifically for broadband RF applications. Suitable for Military Radios, Cellular and Paging Amplifier Base Stations, Broadcast FM/AM, MRI, Laser Driver and others. Polyfet process features low feedback and output capacitances, re