2.5 V/3.3 V、2:1多路复用器/解复用器总线开关

ADG3248是一款2.5 V或3.3 V、高性能2:1多路复用器/解复用器，采用低压CMOS工艺制造，具有低功耗、高开关速度和极低导通电阻特性。低导通电阻特性使输入可以与输出相连，而且不会引起额外的传播延迟或产生额外的接地反弹噪声。\n\n                                        接通时，ADG3248的各开关在两个方向的导电性能相同。该器件为先开后合式，可防止切换通道时发生瞬时短路。\n\n ADG3248采用6引脚小型SC70封装。\n\n 产品聚焦3.3 V或2.5 V电源供电。极低开关传播延迟。 4.5 Ω 开关将输 • 开关传播延迟：225 ps\n\n• 端口之间采用4.5 Ω开关连接\n\n• 数据速率：1.244 Gbps;

2.5 V/ 3.3 V, 2 :1 Multiplexer/ Demultiplexer Bus Switch

文件：172.13 Kbytes Page：12 Pages

2.5 V/3.3 V, 2 1 Multiplexer/ Demultiplexer Bus Switch

文件：493.62 Kbytes Page：12 Pages

2.5 V/3.3 V, 2 1 Multiplexer/ Demultiplexer Bus Switch

文件：493.62 Kbytes Page：12 Pages

2.5 V/ 3.3 V, 2 :1 Multiplexer/ Demultiplexer Bus Switch

文件：172.13 Kbytes Page：12 Pages

2.5 V/ 3.3 V, 2 :1 Multiplexer/ Demultiplexer Bus Switch

文件：172.13 Kbytes Page：12 Pages

2.5 V/ 3.3 V, 2 :1 Multiplexer/ Demultiplexer Bus Switch

文件：172.13 Kbytes Page：12 Pages

3.0V to 5.5V, 10nA, 250kbps RS-232 Transceivers with 짹15kV ESD-Protected I/O and Logic Pins

General Description The MAX3238E/MAX3248E transceivers use Maxim’s revolutionary AutoShutdown Plus™ feature to achieve 10nA supply current. These devices shut down the on board power supply and drivers when they do not sense a valid signal transition on either the receiver or transmitter inputs.

CMOS System Reset

Outline This IC is a system reset IC developed using the CMOS process. Super low consumption current of 0.25µA typ. has been achieved through use of the CMOS process. Also, detection voltage is high precision detection of ±2. Features 1. Super low consumption current 0.25µA typ. (when VDD

Bipolar NPN Device in a Hermetically sealed TO66 Metal Package.

文件：11.07 Kbytes Page：1 Pages