Hybrid RS-170 Video Digitizer

Hybrid RS-170 Video Digitizer

Hybrid RS-170 Video Digitizer

The Analog Devices' AD9502 is a video digitizer which converts RS-170, NTSC, or PAL camera signals directly into 8-bit digital information and control signals. \n\nAll of the analog preprocessing functions needed to move from the analog world of cameras to the digital world of signal processing are

Hybrid RS-170 Video Digitizer

Hybrid RS-170 Video Digitizer

Hybrid RS-170 Video Digitizer

Hybrid RS-170 Video Digitizer

Hybrid RS-170 Video Digitizer

Hybrid RS-170 Video Digitizer

HYBRID PS 179 VIDEO DIGITIZER

文件：2.09434 Mbytes Page：8 Pages

ESD Protection Diode

SPECIAL FEATURES Zener characteristic with voltage snap–back to protect against ESD hits High avalanche voltage, low leakage and low capacitance avoid signal attenuation Compatible to all 5V logic families Space saving, low inductance TSOC surface mount package Symmetric dual–port b

Dual-band, CDMA/AMPS downconverter IC

DESCRIPTION The SA9502 integrates all the front end receive mixers necessary for use in dual-band, triple-mode CDMA/AMPS cellular phone handsets. There are three individual mixer blocks, each optimised for high linearity with low power consumption for operation in one of the following modes: High

Dual-band, CDMA/AMPS downconverter IC

DESCRIPTION The SA9502 integrates all the front end receive mixers necessary for use in dual-band, triple-mode CDMA/AMPS cellular phone handsets. There are three individual mixer blocks, each optimised for high linearity with low power consumption for operation in one of the following modes: High

531/1063 Mbaud Fibre Channel Transmitter and Receiver

TriQuint’s Fibre Channel transmitter (TQ9501) and receiver (TQ9502) are part of the FC531/FC1063 (Fibre Channel 531 and 1063 Megabaud) chip set. In addition to the transmitter and receiver, TriQuint offers the ENcoder/DECoder (TQ9303 ENDEC). The TQ9501, TQ9502, TQ9303 and a gigabit fiber optic mod