Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

FEATURES Offset voltage: 400 μV typical Low offset voltage drift: 6 μV/°C maximum (AD8692/AD8694) Very low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Low distortion: 0.0006% Wide bandwidth: 10 MHz Unity-gain stable Single-supply operation: 2.7 V to 6 V Qualified for automot

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

GENERAL DESCRIPTION The AD8691, AD8692, and AD8694 are low cost, single, dual, and quad rail-to-rail output, single-supply amplifiers featuring low offset and input voltages, low current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers

文件：316.46 Kbytes Page：16 Pages

Electronic, 6 Pr #18 Str TC, PVC Ins, PVC Jkt, CMG

Product Description Electronic, 6 Pair 18AWG (16x30) Tinned Copper, PVC Insulation, PVC Outer Jacket, CMG

Control head for decentralised automation of ELEMENT process valves

The device Type 8691 control head is designed for decentralised automation of ELEMENT Type 21xx pneumatic process valves. The valve position is registered via a contact-free, analogue sensor element which automatically detects and saves the valve end position using the Teach function during sta

I/O modules IP65/ IP67/ IP69k

Bürkert I/O modules (In/Out) Type ME64 for extending the Industrial Ethernet gateway Type ME63 are designed to capture the switching signals of various sensors. The further processing of these input signals, e.g. by Ethernet protocol to a higher field level, is configured via the gateway. The 1

Multifunction Block Solution

The Bürkert block configurations are designed for the control of ultrapure, sterile, aggressive or abrasive fluids. They are designed to be fully drainable and can be operated by either pneumatic actuator or manual handwheel. Available accessories include Positioner/PID controllers, stroke limi

Pneumatic rotary actuator for the automation of ball and butterfly valves

The pneumatic actuator Type 2053 enables the automated actuation of ball and butterfly valves. The linear stroke movement of the actuator piston is deflected into a 90° rotary movement of the drive shaft. The interface on the armature is designed according to ISO 5211. In addition, the rotary a