24 MHz Rail-to-Rail Dual Amplifier

GENERAL DESCRIPTION The AD8646 and the AD8647 are the dual, and the AD8648 is the quad, rail-to-rail, input and output, single-supply amplifiers featuring low offset voltage, wide signal bandwidth, low input voltage, and low current noise. The AD8647 also has a low power shutdown function. FEATU

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

GENERAL DESCRIPTION The AD8646 and the AD8647 are the dual, and the AD8648 is the quad, rail-to-rail, input and output, single-supply amplifiers featuring low offset voltage, wide signal bandwidth, low input voltage, and low current noise. The AD8647 also has a low power shutdown function. FEATU

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

FEATURES Offset voltage: 2.5 mV maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nV/√Hz Wide bandwidth: 24 MHz Slew rate: 11 V/μs Short-circuit output current: 120 mA Qualified for automotive applications No phase reversal Low input bias current: 1 pA Low supply current per ampli

24 MHZ轨到轨双通道运算放大器

AD8646、AD8647和AD8648分别是双通道、双通道和四通道、轨到轨输入和输出、单电源放大器，具有低失调电压、宽信号带宽、低输入电压和低电流噪声等特性。AD8647还具有低功耗关断功能。\n\n 24 MHz带宽、低失调、低噪声和极低的输入偏置电流特性相结合，使这些放大器适合各种应用。滤波器、积分器、光电二极管放大器和高阻抗传感器等器件均可受益于这些特性组合。宽带宽和低失真特性则有益于交流应用。AD8646/AD8647/AD8648均具有高输出驱动能力，是音频线路驱动器和其它低阻抗应用的理想选择。AD8646和AD8648可以用于汽车应用。参见订购指南\n\n 具 • 失调电压：2.5 mV(最大值)\n\n• 单电源供电：2.7 V至5.5 V\n\n• 低噪声：8 nV/√Hz\n\n• 宽带宽：24 MHz\n\n• 压摆率：11 V/µs\n\n• 短路输出电流：120 mA\n\n• 通过汽车应用认证\n\n• 无反相\n\n• 低输入偏置电流：1 pA\n\n• 低电源电流（每个放大器）：2 mA（最大值）\n\n• 单位增益稳定;

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

FEATURES Offset voltage: 2.5 mV maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nV/√Hz Wide bandwidth: 24 MHz Slew rate: 11 V/μs Short-circuit output current: 120 mA Qualified for automotive applications No phase reversal Low input bias current: 1 pA Low supply current per ampli

丝印代码：A1V；24 MHz Rail-to-Rail Amplifiers with Shutdown Option

FEATURES Offset voltage: 2.5 mV maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nV/√Hz Wide bandwidth: 24 MHz Slew rate: 11 V/μs Short-circuit output current: 120 mA Qualified for automotive applications No phase reversal Low input bias current: 1 pA Low supply current per ampli

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

GENERAL DESCRIPTION The AD8646 and the AD8647 are the dual, and the AD8648 is the quad, rail-to-rail, input and output, single-supply amplifiers featuring low offset voltage, wide signal bandwidth, low input voltage, and low current noise. The AD8647 also has a low power shutdown function. FEATU

24 MHz Rail-to-Rail Dual Amplifier

GENERAL DESCRIPTION The AD8646 and the AD8647 are the dual, and the AD8648 is the quad, rail-to-rail, input and output, single-supply amplifiers featuring low offset voltage, wide signal bandwidth, low input voltage, and low current noise. The AD8647 also has a low power shutdown function. FEATU

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

GENERAL DESCRIPTION The AD8646 and the AD8647 are the dual, and the AD8648 is the quad, rail-to-rail, input and output, single-supply amplifiers featuring low offset voltage, wide signal bandwidth, low input voltage, and low current noise. The AD8647 also has a low power shutdown function. FEATU

24 MHz Rail-to-Rail Dual Amplifier

GENERAL DESCRIPTION The AD8646 and the AD8647 are the dual, and the AD8648 is the quad, rail-to-rail, input and output, single-supply amplifiers featuring low offset voltage, wide signal bandwidth, low input voltage, and low current noise. The AD8647 also has a low power shutdown function. FEATU

丝印代码：A1V；24 MHz Rail-to-Rail Amplifiers with Shutdown Option

FEATURES Offset voltage: 2.5 mV maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nV/√Hz Wide bandwidth: 24 MHz Slew rate: 11 V/μs Short-circuit output current: 120 mA Qualified for automotive applications No phase reversal Low input bias current: 1 pA Low supply current per ampli

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

GENERAL DESCRIPTION The AD8646 and the AD8647 are the dual, and the AD8648 is the quad, rail-to-rail, input and output, single-supply amplifiers featuring low offset voltage, wide signal bandwidth, low input voltage, and low current noise. The AD8647 also has a low power shutdown function. FEATU

24 MHz Rail-to-Rail Dual Amplifier

GENERAL DESCRIPTION The AD8646 and the AD8647 are the dual, and the AD8648 is the quad, rail-to-rail, input and output, single-supply amplifiers featuring low offset voltage, wide signal bandwidth, low input voltage, and low current noise. The AD8647 also has a low power shutdown function. FEATU

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

FEATURES Offset voltage: 2.5 mV maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nV/√Hz Wide bandwidth: 24 MHz Slew rate: 11 V/μs Short-circuit output current: 120 mA Qualified for automotive applications No phase reversal Low input bias current: 1 pA Low supply current per ampli

24 MHz Rail-to-Rail Dual Amplifier

GENERAL DESCRIPTION The AD8646 and the AD8647 are the dual, and the AD8648 is the quad, rail-to-rail, input and output, single-supply amplifiers featuring low offset voltage, wide signal bandwidth, low input voltage, and low current noise. The AD8647 also has a low power shutdown function. FEATU

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

GENERAL DESCRIPTION The AD8646 and the AD8647 are the dual, and the AD8648 is the quad, rail-to-rail, input and output, single-supply amplifiers featuring low offset voltage, wide signal bandwidth, low input voltage, and low current noise. The AD8647 also has a low power shutdown function. FEATU

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

FEATURES Offset voltage: 2.5 mV maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nV/√Hz Wide bandwidth: 24 MHz Slew rate: 11 V/μs Short-circuit output current: 120 mA Qualified for automotive applications No phase reversal Low input bias current: 1 pA Low supply current per ampli

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

FEATURES Offset voltage: 2.5 mV maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nV/√Hz Wide bandwidth: 24 MHz Slew rate: 11 V/μs Short-circuit output current: 120 mA Qualified for automotive applications No phase reversal Low input bias current: 1 pA Low supply current per ampli

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

GENERAL DESCRIPTION The AD8646 and the AD8647 are the dual, and the AD8648 is the quad, rail-to-rail, input and output, single-supply amplifiers featuring low offset voltage, wide signal bandwidth, low input voltage, and low current noise. The AD8647 also has a low power shutdown function. FEATU

24 MHz Rail-to-Rail Dual Amplifier

GENERAL DESCRIPTION The AD8646 and the AD8647 are the dual, and the AD8648 is the quad, rail-to-rail, input and output, single-supply amplifiers featuring low offset voltage, wide signal bandwidth, low input voltage, and low current noise. The AD8647 also has a low power shutdown function. FEATU

丝印代码：A1V；24 MHz Rail-to-Rail Amplifiers with Shutdown Option

FEATURES Offset voltage: 2.5 mV maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nV/√Hz Wide bandwidth: 24 MHz Slew rate: 11 V/μs Short-circuit output current: 120 mA Qualified for automotive applications No phase reversal Low input bias current: 1 pA Low supply current per ampli

丝印代码：A1V；24 MHz Rail-to-Rail Amplifiers with Shutdown Option

FEATURES Offset voltage: 2.5 mV maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nV/√Hz Wide bandwidth: 24 MHz Slew rate: 11 V/μs Short-circuit output current: 120 mA Qualified for automotive applications No phase reversal Low input bias current: 1 pA Low supply current per ampli

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

FEATURES Offset voltage: 2.5 mV maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nV/√Hz Wide bandwidth: 24 MHz Slew rate: 11 V/μs Short-circuit output current: 120 mA Qualified for automotive applications No phase reversal Low input bias current: 1 pA Low supply current per ampli

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

FEATURES Offset voltage: 2.5 mV maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nV/√Hz Wide bandwidth: 24 MHz Slew rate: 11 V/μs Short-circuit output current: 120 mA Qualified for automotive applications No phase reversal Low input bias current: 1 pA Low supply current per ampli

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：392.57 Kbytes Page：20 Pages

24 MHz Rail-to-Rail Amplifiers

文件：520.7 Kbytes Page：20 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：513.799 Kbytes Page：18 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：513.799 Kbytes Page：18 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：392.57 Kbytes Page：20 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：392.57 Kbytes Page：20 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：513.799 Kbytes Page：18 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：513.799 Kbytes Page：18 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：392.57 Kbytes Page：20 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：392.57 Kbytes Page：20 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：513.799 Kbytes Page：18 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：513.799 Kbytes Page：18 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：392.57 Kbytes Page：20 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：392.57 Kbytes Page：20 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：513.799 Kbytes Page：18 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：513.799 Kbytes Page：18 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：392.57 Kbytes Page：20 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：392.57 Kbytes Page：20 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：513.799 Kbytes Page：18 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：513.799 Kbytes Page：18 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：392.57 Kbytes Page：20 Pages

T-1 Subminiature Lamps

T-1¼ Subminiature Lamps

6A, 2MHz Step-Down Regulator with Integrated Switches

General Description The MAX8646 high-efficiency switching regulator delivers up to 6A load current at output voltages from 0.6V to 0.9 x VIN. The IC operates from 2.35V to 3.6V, making it ideal for on-board point-of-load and postregulation applications. Total output error is less than ±1 over loa

T-1 1/4 Special Midget Flange Base

文件：224.12 Kbytes Page：1 Pages