1.8 V, 5 MHz Rail-to-Rail Low Power Operational Amplifiers

GENERAL DESCRIPTION The AD8631 brings precision and bandwidth to the SOT-23-5 package at single supply voltages as low as 1.8 V and low supply current. The small package makes it possible to place the AD8631 next to sensors, reducing external noise pickup. FEATURES Single Supply Operat

480μA, 6.5MHz, RRIO CMOS Operational Amplifiers

Features  High Slew Rate: 4V/μs  Wide Bandwidth: 6.5MHz  Low Power: 480μA per Amplifier Supply Current  Settling Time to 0.1 with 2V Step: 1 μs  Low Noise: 20 nV/√Hz@10KHz  High Gains of 103 dB for Active Filters and Gain Stages  Low Offset Voltage: 4.2 mV Maximum  Unit Gain Stab

双路、1.8 V、5 MHz、轨到轨、低功耗运算放大器

AD8631和AD8632均为轨到轨输入和输出、双极性放大器，采用1.8 V电源时的增益带宽为4 MHz，典型失调电压为0.8 mV。低电源电流和低电源电压特性使这些器件成为电池供电应用的理想之选。二者的压摆率均为3 V/µs，因此特别适合驱动ASIC输入，如语音编解码器等。\r\nAD8631/AD8632的额定温度范围为-40 ° C至+125 ° C扩展工业温度范围。AD8631单路放大器提供5引脚SOT-23表面贴装封装。AD8632双路放大器提供8引脚SOIC和µSOIC两种封装。 • 单电源供电：1.8 V至6 V\r\n• 节省空间的SOT-23、µSOIC封装\r\n• 宽带宽：5 MHz (5 V)，4 MHz (1.8 V)\r\n• 低失调电压：4 mV（最大值），0.8 mV（典型值）\r\n• 轨到轨输入和输出摆幅\r\n• 压摆率：2 V/µs (1.8 V)\r\n• 电源电流仅225 µA (1.8 V);

1.8 V, 5 MHz Rail-to-Rail Low Power Operational Amplifiers

文件：159.02 Kbytes Page：12 Pages

1.8 V, 5 MHz Rail-to-Rail Low Power Operational Amplifiers

GENERAL DESCRIPTION The AD8631 brings precision and bandwidth to the SOT-23-5 package at single supply voltages as low as 1.8 V and low supply current. The small package makes it possible to place the AD8631 next to sensors, reducing external noise pickup. FEATURES Single Supply Operat

1.8 V, 5 MHz Rail-to-Rail Low Power Operational Amplifiers

GENERAL DESCRIPTION The AD8631 brings precision and bandwidth to the SOT-23-5 package at single supply voltages as low as 1.8 V and low supply current. The small package makes it possible to place the AD8631 next to sensors, reducing external noise pickup. FEATURES Single Supply Operat

480μA, 6.5MHz, RRIO CMOS Operational Amplifiers

Features  High Slew Rate: 4V/μs  Wide Bandwidth: 6.5MHz  Low Power: 480μA per Amplifier Supply Current  Settling Time to 0.1 with 2V Step: 1 μs  Low Noise: 20 nV/√Hz@10KHz  High Gains of 103 dB for Active Filters and Gain Stages  Low Offset Voltage: 4.2 mV Maximum  Unit Gain Stab

480μA, 6.5MHz, RRIO CMOS Operational Amplifiers

Features  High Slew Rate: 4V/μs  Wide Bandwidth: 6.5MHz  Low Power: 480μA per Amplifier Supply Current  Settling Time to 0.1 with 2V Step: 1 μs  Low Noise: 20 nV/√Hz@10KHz  High Gains of 103 dB for Active Filters and Gain Stages  Low Offset Voltage: 4.2 mV Maximum  Unit Gain Stab

480μA, 6.5MHz, RRIO CMOS Operational Amplifiers

Features  High Slew Rate: 4V/μs  Wide Bandwidth: 6.5MHz  Low Power: 480μA per Amplifier Supply Current  Settling Time to 0.1 with 2V Step: 1 μs  Low Noise: 20 nV/√Hz@10KHz  High Gains of 103 dB for Active Filters and Gain Stages  Low Offset Voltage: 4.2 mV Maximum  Unit Gain Stab

T-1 Subminiature Lamps

T-1¼ Subminiature Lamps

Low-voltage, Low-current Compander

Low-voltage, Low-current Compander

Low-Voltage/Low-Saturation Camera Motor Driver?

Overview The LB8632V is a general-purpose camera motor driver IC that supports low-saturation output and low-voltage drive and thus can be used in a wide range of applications. The LB8632V is a miniature thin form-factor IC that provides circuit structures and I/O logic that reduce development ti

Low-Voltage/Low-Saturation Camera Motor Driver?

Overview The LB8632V is a general-purpose camera motor driver IC that supports low-saturation output and low-voltage drive and thus can be used in a wide range of applications. The LB8632V is a miniature thin form-factor IC that provides circuit structures and I/O logic that reduce development ti