Precision Low Power Single-Supply JFET Amplifier

GENERAL DESCRIPTION The AD862x is a precision JFET input amplifier. It features true single-supply operation, low power consumption, and rail-to-rail output. The outputs remain stable with capacitive loads of over 500 pF; the supply current is less than 630 μA/amp. Applications for the AD862x inc

Precision Low Power Single-Supply JFET Amplifiers

FEATURES SC70 package Very low IB: 1 pA max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±13 V Rail-to-rail output Low supply current: 630 μA/amp typ Low offset voltage: 500 μV max Unity gain stable No phase reversal APPLICATIONS Photodiode amplifiers ATEs Line-power

精密、低功耗、单电源、JFET放大器，采用5引脚SC70封装

AD8627是一款单电源、精密JFET输入放大器，具有低功耗和轨到轨输出等特性。当容性负载超过500 pF时，输出仍能保持稳定；每个放大器的电源电流小于900 µA。\n\n 这些放大器的具体应用包括：光电二极管跨导放大、ATE基准电平驱动器、电池管理、线路供电和便携式仪器仪表，以及包括汽车传感器在内的远程传感器信号调理。此外还具有近似轨到轨输入与输出摆幅能力，因而设计人员可以在单电源系统中缓冲CMOS DAC、ASIC及其它宽输出摆幅器件。5 MHz带宽和低失调特性则特别适合精密滤波器。\n\n AD8627的额定温度范围为-40 °C至+125 °C扩展工业温度范围，提 • SC70封装\n\n• 极低输入偏置电流：1 pA(最大值)\n\n• 单电源供电：5 V至26 V\n\n• 双电源供电：±2.5 V至±13 V\n\n• 轨到轨输出\n\n• 低电源电流：每个放大器750µA\n\n• 低失调电压：500µV(最大值)\n\n• 单位增益稳定\n\n• 无反相;

Single-Supply JFET Amplifiers

文件：290.32 Kbytes Page：20 Pages

Precision Low Power Single-Supply JFET Amplifier

GENERAL DESCRIPTION The AD862x is a precision JFET input amplifier. It features true single-supply operation, low power consumption, and rail-to-rail output. The outputs remain stable with capacitive loads of over 500 pF; the supply current is less than 630 μA/amp. Applications for the AD862x inc

Precision Low Power Single-Supply JFET Amplifier

GENERAL DESCRIPTION The AD862x is a precision JFET input amplifier. It features true single-supply operation, low power consumption, and rail-to-rail output. The outputs remain stable with capacitive loads of over 500 pF; the supply current is less than 630 μA/amp. Applications for the AD862x inc

Precision Low Power Single-Supply JFET Amplifier

GENERAL DESCRIPTION The AD862x is a precision JFET input amplifier. It features true single-supply operation, low power consumption, and rail-to-rail output. The outputs remain stable with capacitive loads of over 500 pF; the supply current is less than 630 μA/amp. Applications for the AD862x inc

丝印代码：B9B；Precision Low Power Single-Supply JFET Amplifiers

FEATURES SC70 package Very low IB: 1 pA max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±13 V Rail-to-rail output Low supply current: 630 μA/amp typ Low offset voltage: 500 μV max Unity gain stable No phase reversal APPLICATIONS Photodiode amplifiers ATEs Line-power

丝印代码：B9B；Precision Low Power Single-Supply JFET Amplifiers

FEATURES SC70 package Very low IB: 1 pA max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±13 V Rail-to-rail output Low supply current: 630 μA/amp typ Low offset voltage: 500 μV max Unity gain stable No phase reversal APPLICATIONS Photodiode amplifiers ATEs Line-power

丝印代码：B9B；Precision Low Power Single-Supply JFET Amplifiers

FEATURES SC70 package Very low IB: 1 pA max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±13 V Rail-to-rail output Low supply current: 630 μA/amp typ Low offset voltage: 500 μV max Unity gain stable No phase reversal APPLICATIONS Photodiode amplifiers ATEs Line-power

Precision Low Power Single-Supply JFET Amplifier

GENERAL DESCRIPTION The AD862x is a precision JFET input amplifier. It features true single-supply operation, low power consumption, and rail-to-rail output. The outputs remain stable with capacitive loads of over 500 pF; the supply current is less than 630 μA/amp. Applications for the AD862x inc

Precision Low Power Single-Supply JFET Amplifier

GENERAL DESCRIPTION The AD862x is a precision JFET input amplifier. It features true single-supply operation, low power consumption, and rail-to-rail output. The outputs remain stable with capacitive loads of over 500 pF; the supply current is less than 630 μA/amp. Applications for the AD862x inc

Precision Low Power Single-Supply JFET Amplifier

GENERAL DESCRIPTION The AD862x is a precision JFET input amplifier. It features true single-supply operation, low power consumption, and rail-to-rail output. The outputs remain stable with capacitive loads of over 500 pF; the supply current is less than 630 μA/amp. Applications for the AD862x inc

Precision Low Power Single-Supply JFET Amplifiers

FEATURES SC70 package Very low IB: 1 pA max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±13 V Rail-to-rail output Low supply current: 630 μA/amp typ Low offset voltage: 500 μV max Unity gain stable No phase reversal APPLICATIONS Photodiode amplifiers ATEs Line-power

Precision Low Power Single-Supply JFET Amplifiers

FEATURES SC70 package Very low IB: 1 pA max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±13 V Rail-to-rail output Low supply current: 630 μA/amp typ Low offset voltage: 500 μV max Unity gain stable No phase reversal APPLICATIONS Photodiode amplifiers ATEs Line-power

Precision Low Power Single-Supply JFET Amplifiers

FEATURES SC70 package Very low IB: 1 pA max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±13 V Rail-to-rail output Low supply current: 630 μA/amp typ Low offset voltage: 500 μV max Unity gain stable No phase reversal APPLICATIONS Photodiode amplifiers ATEs Line-power

Single-Supply JFET Amplifiers

文件：290.32 Kbytes Page：20 Pages

Precision Low Power Single-Supply JFET Amplifiers

文件：290.32 Kbytes Page：20 Pages

Precision Low Power Single-Supply JFET Amplifiers

文件：290.32 Kbytes Page：20 Pages

Precision Low Power Single-Supply JFET Amplifiers

文件：290.32 Kbytes Page：20 Pages

Precision Low Power Single-Supply JFET Amplifiers

文件：290.32 Kbytes Page：20 Pages

Precision Low Power Single-Supply JFET Amplifiers

文件：290.32 Kbytes Page：20 Pages

Precision Low Power Single-Supply JFET Amplifiers

文件：290.32 Kbytes Page：20 Pages

T-1 Subminiature Lamps

T-1¼ Subminiature Lamps

130/225 MHz Low Power Prescalers

文件：92.61 Kbytes Page：4 Pages