Precision Low noise CMOS Rail-to-Rail Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

Dual, Current-Output, Serial-Input, 16-/14-Bit DACs

PRODUCT OVERVIEW The AD5545/AD5555 are 16-bit/14-bit, current-output, digital=to-analog converters designed to operate from a 4.5 V to 5.5 V supply range. FEATURES 16-bit resolution AD5545 14-bit resolution AD5555 ±1 LSB DNL monotonic ±1 LSB INL 2 mA full-scale current ±

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

FEATURES Low offset voltage: 65 μV maximum Low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Wide bandwidth: 10 MHz High open-loop gain: 1000 V/mV Unity gain stable Single-supply operation: 2.7 V to 5.5 V 5-ball WLCSP for single (AD8605) and 8-ball WLCSP for dual (AD8606) APPLICATIONS

Ultralow Noise Amplifier at Lower Power

FEATURES Ultralow noise: 2.8 nV/√Hz at 1 kHz typical Ultralow distortion: 0.0002% typical Low supply current: 1.8 mA per amplifier typical Offset voltage: 1 mV maximum Bandwidth: 6.5 MHz typical Slew rate: 12 V/μs typical Dual-supply operation: ±4.5 V to ±18 V Unity-gain stable Extended

精密、低噪声、轨到轨输入输出、CMOS运算放大器（双路）

AD8605、AD8606和AD8608分别是单通道、双通道和四通道、轨到轨输入和输出、单电源放大器，具有极低失调电压、低输入电压和电流噪声以及宽信号带宽等特性。这些放大器采用ADI公司的DigiTrim®调整专利技术，无需激光调整便可达到出色的精度。\n\n 低失调、低噪声、极低的输入偏置电流和高速度特性相结合，使这些放大器适合各种应用。滤波器、积分器、光电二极管放大器和高阻抗传感器等器件均可受益于这些特性组合。宽带宽和低失真特性则有益于音频和其它交流应用。具体应用包括光学控制环路、便携式和环路供电仪器仪表以及便携式设备的音频放大。\n\n AD8605、AD8606和A • 提供中文数据手册\n\n• 低失调电压: 65 µV（最大值） \n\n• 低输入偏置电流: 1 pA（最大值） \n\n• 低噪声: 8 nV/√Hz \n\n• 宽带宽: 10 MHZ\n\n• 高开环增益: 1000 V/mV\n\n• 单位增益稳定 \n\n• 单电源供电：2.7 V至5.5 V\n\n• 5引脚WLCSP封装（单路放大器AD8605），8引脚WLCSP封装（双路放大器AD8606）;

Ultralow Noise Amplifier at Lower Power

文件：1.57654 Mbytes Page：24 Pages

Tape and Reel Packaging

文件：395.36 Kbytes Page：6 Pages

Tape and Reel Packaging

文件：395.36 Kbytes Page：6 Pages

Technical Article

文件：248.36 Kbytes Page：5 Pages

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

文件：738.12 Kbytes Page：24 Pages

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

FEATURES Low offset voltage: 65 μV maximum Low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Wide bandwidth: 10 MHz High open-loop gain: 1000 V/mV Unity gain stable Single-supply operation: 2.7 V to 5.5 V 5-ball WLCSP for single (AD8605) and 8-ball WLCSP for dual (AD8606) APPLICATIONS

Precision Low noise CMOS Rail-to-Rail Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

Precision Low noise CMOS Rail-to-Rail Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

丝印代码：A1J；Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

FEATURES Low offset voltage: 65 μV maximum Low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Wide bandwidth: 10 MHz High open-loop gain: 1000 V/mV Unity gain stable Single-supply operation: 2.7 V to 5.5 V 5-ball WLCSP for single (AD8605) and 8-ball WLCSP for dual (AD8606) APPLICATIONS

Precision Low noise CMOS Rail-to-Rail Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

Precision Low noise CMOS Rail-to-Rail Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

Precision Low noise CMOS Rail-to-Rail Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

Precision Low noise CMOS Rail-to-Rail Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

丝印代码：B3A；Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

FEATURES Low offset voltage: 65 μV maximum Low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Wide bandwidth: 10 MHz High open-loop gain: 1000 V/mV Unity gain stable Single-supply operation: 2.7 V to 5.5 V 5-ball WLCSP for single (AD8605) and 8-ball WLCSP for dual (AD8606) APPLICATIONS

丝印代码：B3A；Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

FEATURES Low offset voltage: 65 μV maximum Low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Wide bandwidth: 10 MHz High open-loop gain: 1000 V/mV Unity gain stable Single-supply operation: 2.7 V to 5.5 V 5-ball WLCSP for single (AD8605) and 8-ball WLCSP for dual (AD8606) APPLICATIONS

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

Precision Low noise CMOS Rail-to-Rail Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

Precision Low noise CMOS Rail-to-Rail Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

丝印代码：B3A；Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

FEATURES Low offset voltage: 65 μV maximum Low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Wide bandwidth: 10 MHz High open-loop gain: 1000 V/mV Unity gain stable Single-supply operation: 2.7 V to 5.5 V 5-ball WLCSP for single (AD8605) and 8-ball WLCSP for dual (AD8606) APPLICATIONS

精密放大器 AD8605ARTZ-REEL7

文件：894.704 Kbytes Page：25 Pages

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

文件：738.12 Kbytes Page：24 Pages

Precision, Low Noise, CMOS, Rail-to-Rail

文件：836.93 Kbytes Page：24 Pages

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

文件：738.12 Kbytes Page：24 Pages

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

文件：738.12 Kbytes Page：24 Pages

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

文件：738.12 Kbytes Page：24 Pages

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

文件：738.12 Kbytes Page：24 Pages

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

文件：738.12 Kbytes Page：24 Pages

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

文件：738.12 Kbytes Page：24 Pages

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

文件：738.12 Kbytes Page：24 Pages

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

文件：738.12 Kbytes Page：24 Pages

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

文件：738.12 Kbytes Page：24 Pages

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

文件：738.12 Kbytes Page：24 Pages

Radiation Hardened 50 Watt Power Supply Module

General Description Aeroflex’s ACT861X series of power supply modules are radiation hardened 50 Watt units designed for use in space applications. Using a double ended forward topology with synchronous rectifiers achieves high efficiency, and the use of Chip-On-Board (COB) construction together