Wide Supply Range, Rail-to-Rail Output Instrumentation Amplifier

GENERAL DESCRIPTION The AD8426 is a dual-channel, low cost, wide supply range instrumentation amplifier that requires only one external resistor to set any gain from 1 to 1000. The AD8426 is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the

Precision, Dual-Channel Instrumentation Amplifier

GENERAL DESCRIPTION The AD8222 is a dual-channel, high performance instrumentation amplifier that requires only one external resistor per amplifier to set gains of 1 to 10,000. The AD8222 is the first dual-instrumentation amplifier in the small 4 mm × 4mm LFCSP. It requires the same board area a

Low Noise, Low Gain Drift, G = 2000 Instrumentation Amplifier

GENERAL DESCRIPTION The AD8428 is an ultralow noise instrumentation amplifier designed to accurately measure tiny, high speed signals. It delivers industry-leading gain accuracy, noise, and bandwidth. All gain setting resistors for the AD8428 are internal to the part and are precisely matched. C

1.8 V to 5 V Auto-Zero, In-Amp with Shutdown

GENERAL DESCRIPTION The AD8253 is an instrumentation amplifier with digitally programmable gains that has GΩ input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidt

1.8 V至5 V自稳零仪表放大器，内置关断功能

AD8553是一款精密仪表放大器，具有低噪声、轨到轨输出性能和省电关断模式，还具有低失调、低漂移及高共模抑制特性。在关断模式下，总电源电流降至4 µA以下。工作电压范围为+1.8V至+5.5V。\n\n AD8553的失调电压为20µV，失调电压漂移为0.1µV/℃，电压噪声仅为0.7µV峰峰值（0.01Hz至10 Hz），因而是应用中不容许存在误差源时的理想之选。低噪声、低输入偏置电流和高共模抑制特性，对精密仪器仪表、位置和压力传感器、医疗仪器以及应力计放大器都极为有利。小尺寸和低成本使这些器件非常适合大规模应用。\n\n 对于空间受限的设备和便携式系统而言，小封装和低功 • 低失调电压：20 µV（最大值）\n\n• 低输入失调漂移：0.1 µV/°C\n\n• 高CMRR：140 dB（典型值，G=100）\n\n• 非线性度：0.001%（典型值，G=100）\n\n• 宽增益范围：0.1至10,000\n\n• 单电源供电：+1.8V至+5.5V\n\n• 轨到轨输出\n\n• 关断功能;

Wide Supply Range, Micropower,

文件：529.22 Kbytes Page：28 Pages

1.8 V to 5 V Auto-Zero, In-Amp with Shutdown

文件：334.79 Kbytes Page：20 Pages

Wide Supply Range, Rail-to-Rail

文件：805.88 Kbytes Page：28 Pages

Zero Drift, Digitally Programmable Instrumentation Amplifier

文件：725.71 Kbytes Page：24 Pages

10 MHz, 20 V/關s, G = 1, 10, 100, 1000 i CMOS짰 Programmable Gain Instrumentation Amplifier

GENERAL DESCRIPTION The AD8253 is an instrumentation amplifier with digitally programmable gains that has GΩ input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidt

1.8 V to 5 V Auto-Zero, In-Amp with Shutdown

GENERAL DESCRIPTION The AD8253 is an instrumentation amplifier with digitally programmable gains that has GΩ input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidt

1.8 V to 5 V Auto-Zero, In-Amp with Shutdown

GENERAL DESCRIPTION The AD8253 is an instrumentation amplifier with digitally programmable gains that has GΩ input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidt

1.8 V to 5 V Auto-Zero, In-Amp with Shutdown

文件：334.79 Kbytes Page：20 Pages

1.8 V to 5 V Auto-Zero, In-Amp with Shutdown

文件：383.95 Kbytes Page：21 Pages

1.8 V to 5 V Auto-Zero, In-Amp with Shutdown

文件：334.79 Kbytes Page：20 Pages

1.8 V to 5 V Auto-Zero, In-Amp with Shutdown

文件：383.95 Kbytes Page：21 Pages

1.8 V to 5 V Auto-Zero, In-Amp with Shutdown

文件：334.79 Kbytes Page：20 Pages

1.8 V to 5 V Auto-Zero, In-Amp with Shutdown

文件：334.79 Kbytes Page：20 Pages

1.8 V to 5 V Auto-Zero, In-Amp with Shutdown

文件：383.95 Kbytes Page：21 Pages

4.5V to 28V Input, Synchronous PWM Buck Controllers for DDR Termination and Point-of-Load Applications

General Description The MAX8553 is a 4.5V to 28V input-voltage, synchronous step-down controller that provides a complete power-management solution for DDR memory. The MAX8553 generates 1/2 VREFIN voltage for VTT and VTTR. The VTT and VTTR tracking voltages are maintained within 1 of 1/2 VREFIN.

4.5V to 28V Input, Synchronous PWM Buck Controllers for DDR Termination and Point-of-Load Applications

General Description The MAX8553 is a 4.5V to 28V input-voltage, synchronous step-down controller that provides a complete power-management solution for DDR memory. The MAX8553 generates 1/2 VREFIN voltage for VTT and VTTR. The VTT and VTTR tracking voltages are maintained within 1 of 1/2 VREFIN.

400mA CMOS Low Dropout Voltage Low consumption Regulator

文件：1.34787 Mbytes Page：13 Pages

MIL-STD-1553 TRANSCEIVER

文件：289.57 Kbytes Page：4 Pages

G-FORCE SENSOR AMP IC

文件：421.39 Kbytes Page：12 Pages