High-Speed, Low-Noise Video Op Amp

GENERAL DESCRIPTION The AD829 is a low noise (1.7 nV/√Hz), high speed op amp with custom compensation that provides the user with gains of ±1 to ±20 while maintaining a bandwidth greater than 50 MHz. The AD829’s 0.04° differential phase and 0.02 differential gain performance at 3.58 MHz and 4.43

14-Bit, 1 MSPS, Differential, Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7952 is a 14-bit, charge redistribution, successive approximation register (SAR) architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write-only serial

High Speed, Low Noise Video Op Amp

FEATURES High speed 120 MHz bandwidth, gain = −1 230 V/μs slew rate 90 ns settling time to 0.1% Ideal for video applications 0.02% differential gain 0.04° differential phase Low noise 1.7 nV/√Hz input voltage noise 1.5 pA/√Hz input current noise Excellent dc precision 1 mV maxi

高速、低噪声视频运算放大器

AD829是一款低噪声(1.7 nV/√Hz)、高速运算放大器，具有自定义补偿特性，用户可以在±1至±20范围内设置增益，同时保持50 MHz以上带宽。它在3.58 MHz和4.43 MHz条件下，差分相位和差分增益误差分别为0.04°和0.02%，可以驱动反转端接的50 Ω或75 Ω电缆，因此特别适合专业视频应用。AD829仅需5 mA电源电流便可实现230V/µs无补偿压摆率和120 MHz增益带宽积。AD829的外部补偿引脚使它拥有异常丰富的功能。例如，针对指定负载和电源电压，可以选择补偿来优化带宽。用作增益为2的线路驱动器时，以1 dB峰值的代价就可以将-3dB带宽提高至95 • 高速\n带宽：120 MHz (G = -1)\n压摆率：230 V/µs\n0.1%建立时间：90 ns\n\n• 特别适合视频应用\n差分增益误差：0.02%\n差分相位误差：0.04°\n\n• 低噪声\n输入电压噪声：1.7 nV/√Hz\n输入电流噪声：1.5 pA/√HZ\n\n• 出色的直流精度\n输入失调电压：最大1 mV(整个温度范围内)\n输入失调漂移：0.3 mV/°C\n\n• 灵活的工作方式\n额定工作电压：±5 V至±15 V\n输出摆幅：±3 V(150Ω负载)\n外部补偿(增益范围：1至20)\n电源电流：5 mA\n\n• 依据EIA-48;

High Speed, Low Noise Video Op Amp

文件：275.51 Kbytes Page：16 Pages

High Speed, Low Noise Video Op Amp

文件：394.59 Kbytes Page：21 Pages

High Speed, Low Noise Video Op Amp

FEATURES High speed 120 MHz bandwidth, gain = −1 230 V/μs slew rate 90 ns settling time to 0.1% Ideal for video applications 0.02% differential gain 0.04° differential phase Low noise 1.7 nV/√Hz input voltage noise 1.5 pA/√Hz input current noise Excellent dc precision 1 mV maxi

G = 50, CMOS Sensor Amplifier with Current Excitation

GENERAL DESCRIPTION The AD8290 contains both an adjustable current source to drive a sensor and a difference amplifier to amplify the signal voltage. The amplifier is set for a fixed gain of 50. The AD8290 is an excellent solution for both the drive and the sensing aspects required for pressure,

Low Noise, Low Gain Drift, G = 2000 Instrumentation Amplifier

GENERAL DESCRIPTION The AD8428 is an ultralow noise instrumentation amplifier designed to accurately measure tiny, high speed signals. It delivers industry-leading gain accuracy, noise, and bandwidth. All gain setting resistors for the AD8428 are internal to the part and are precisely matched. C

Wide Supply Range, Rail-to-Rail Output Instrumentation Amplifier

GENERAL DESCRIPTION The AD8426 is a dual-channel, low cost, wide supply range instrumentation amplifier that requires only one external resistor to set any gain from 1 to 1000. The AD8426 is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the

G = 50, CMOS Sensor Amplifier with Current Excitation

GENERAL DESCRIPTION The AD8290 contains both an adjustable current source to drive a sensor and a difference amplifier to amplify the signal voltage. The amplifier is set for a fixed gain of 50. The AD8290 is an excellent solution for both the drive and the sensing aspects required for pressure,

G = 50, CMOS Sensor Amplifier with Current Excitation

GENERAL DESCRIPTION The AD8290 contains both an adjustable current source to drive a sensor and a difference amplifier to amplify the signal voltage. The amplifier is set for a fixed gain of 50. The AD8290 is an excellent solution for both the drive and the sensing aspects required for pressure,

G = 50, CMOS Sensor Amplifier with Current Excitation

GENERAL DESCRIPTION The AD8290 contains both an adjustable current source to drive a sensor and a difference amplifier to amplify the signal voltage. The amplifier is set for a fixed gain of 50. The AD8290 is an excellent solution for both the drive and the sensing aspects required for pressure,

Low Noise, Low Gain Drift, G = 2000 Instrumentation Amplifier

GENERAL DESCRIPTION The AD8428 is an ultralow noise instrumentation amplifier designed to accurately measure tiny, high speed signals. It delivers industry-leading gain accuracy, noise, and bandwidth. All gain setting resistors for the AD8428 are internal to the part and are precisely matched. C

Wide Supply Range, Rail-to-Rail Output Instrumentation Amplifier

GENERAL DESCRIPTION The AD8426 is a dual-channel, low cost, wide supply range instrumentation amplifier that requires only one external resistor to set any gain from 1 to 1000. The AD8426 is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the

Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain

GENERAL DESCRIPTION The AD8293G80/AD8293G160 are small, low cost, precision instrumentation amplifiers that have low noise and rail-to-rail outputs. They are available in two fixed-gain models: 80 and 160. They incorporate the gain setting resistors and filter resistors, reducing the number of an

低成本、零漂移仪表放大器，内置滤波器，具有固定增益G = 160

AD8293G80/AD8293G160均为小型、低成本、精密仪表放大器，具有低噪声和轨到轨输出特性，分别提供固定增益80和160。两款器件均集成增益设置电阻和滤波器电阻，可减少辅助元件数量。例如，实施2极点滤波器只需两个外部电容。AD8293G80/AD8293G160还具有低失调电压、低失调漂移、低增益漂移和高共模抑制特性。二者均采用1.8 V至5.5 V电源供电。 失调电压为20 μV (AD8293G160B)，失调电压漂移为0.3 μV/°C，电压噪声仅为0.7 μV峰峰值（0.01 Hz至10 Hz），因此AD8293G80/AD8293G160非常适合不容许存在误差源的 • 小型封装：8引脚SOT-23\n\n• 器件数量更少 集成了增益电阻和滤波器电阻\n\n\n\n• 低失调电压：20 μV（最大值）\n\n• 低失调漂移：0.3 μV/°C（最大值）\n\n• 低增益漂移：25 ppm/°C（最大值）\n\n• 高共模抑制(CMR)：140 dB（典型值）\n\n• 低噪声：0.7 µV峰峰值（0.01 Hz至10 Hz）\n\n• 单电源供电：1.8 V至5.5 V\n\n• 轨到轨输出\n\n• 提供2种固定增益型号;

Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain

GENERAL DESCRIPTION The AD8293G80/AD8293G160 are small, low cost, precision instrumentation amplifiers that have low noise and rail-to-rail outputs. They are available in two fixed-gain models: 80 and 160. They incorporate the gain setting resistors and filter resistors, reducing the number of an

Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain

GENERAL DESCRIPTION The AD8293G80/AD8293G160 are small, low cost, precision instrumentation amplifiers that have low noise and rail-to-rail outputs. They are available in two fixed-gain models: 80 and 160. They incorporate the gain setting resistors and filter resistors, reducing the number of an

Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain

GENERAL DESCRIPTION The AD8293G80/AD8293G160 are small, low cost, precision instrumentation amplifiers that have low noise and rail-to-rail outputs. They are available in two fixed-gain models: 80 and 160. They incorporate the gain setting resistors and filter resistors, reducing the number of an

Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain

GENERAL DESCRIPTION The AD8293G80/AD8293G160 are small, low cost, precision instrumentation amplifiers that have low noise and rail-to-rail outputs. They are available in two fixed-gain models: 80 and 160. They incorporate the gain setting resistors and filter resistors, reducing the number of an

Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain

GENERAL DESCRIPTION The AD8293G80/AD8293G160 are small, low cost, precision instrumentation amplifiers that have low noise and rail-to-rail outputs. They are available in two fixed-gain models: 80 and 160. They incorporate the gain setting resistors and filter resistors, reducing the number of an

Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain

GENERAL DESCRIPTION The AD8293G80/AD8293G160 are small, low cost, precision instrumentation amplifiers that have low noise and rail-to-rail outputs. They are available in two fixed-gain models: 80 and 160. They incorporate the gain setting resistors and filter resistors, reducing the number of an

Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain

GENERAL DESCRIPTION The AD8293G80/AD8293G160 are small, low cost, precision instrumentation amplifiers that have low noise and rail-to-rail outputs. They are available in two fixed-gain models: 80 and 160. They incorporate the gain setting resistors and filter resistors, reducing the number of an

带滤波器和固定增益为80的低成本、零漂移仪表放大器

AD8293G80/AD8293G160是低噪声和轨到轨输出的小尺寸、低成本、精密仪表放大器。这两款放大器采用两个固定增益模型(80和160)，集成了增益设置电阻和滤波器电阻，从而减少了辅助元件数。例如，仅需两个外部电容即可实现双极滤波器。AD8293G80/AD8293G160还具备低失调电压、失调漂移、增益漂移以及高共模抑制等特性，均可采用1.8 V至5.5 V电源供电。\n\n 由于AD8293G80/AD8293G160具备20 µV的低失调电压(AD8293G160B)、0.3 µV/°C的失调电压漂移以及仅0.7 µVp-p的电压噪声(0.01 Hz至10 Hz)，因此非 • 小尺寸封装：8引脚SOT-23封装\n\n• 元器件数降低  集成了增益电阻和滤波器电阻\n\n\n\n• 低失调电压：20 µV(最大值)\n\n• 低失调漂移：0.3 µV/°C(最大值)\n\n• 低增益漂移：25 ppm/°C(最大值)\n\n• 高CMR：140 dB(典型值)\n\n• 低噪声：0.7 µVp-p(0.01 Hz至10 Hz)\n\n• 单电源供电：1.8 V至5.5 V\n\n• 轨到轨输出\n\n• 采用两个固定增益模型;

Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain

GENERAL DESCRIPTION The AD8293G80/AD8293G160 are small, low cost, precision instrumentation amplifiers that have low noise and rail-to-rail outputs. They are available in two fixed-gain models: 80 and 160. They incorporate the gain setting resistors and filter resistors, reducing the number of an

Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain

GENERAL DESCRIPTION The AD8293G80/AD8293G160 are small, low cost, precision instrumentation amplifiers that have low noise and rail-to-rail outputs. They are available in two fixed-gain models: 80 and 160. They incorporate the gain setting resistors and filter resistors, reducing the number of an

Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain

GENERAL DESCRIPTION The AD8293G80/AD8293G160 are small, low cost, precision instrumentation amplifiers that have low noise and rail-to-rail outputs. They are available in two fixed-gain models: 80 and 160. They incorporate the gain setting resistors and filter resistors, reducing the number of an

Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain

GENERAL DESCRIPTION The AD8293G80/AD8293G160 are small, low cost, precision instrumentation amplifiers that have low noise and rail-to-rail outputs. They are available in two fixed-gain models: 80 and 160. They incorporate the gain setting resistors and filter resistors, reducing the number of an

Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain

GENERAL DESCRIPTION The AD8293G80/AD8293G160 are small, low cost, precision instrumentation amplifiers that have low noise and rail-to-rail outputs. They are available in two fixed-gain models: 80 and 160. They incorporate the gain setting resistors and filter resistors, reducing the number of an

Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain

GENERAL DESCRIPTION The AD8293G80/AD8293G160 are small, low cost, precision instrumentation amplifiers that have low noise and rail-to-rail outputs. They are available in two fixed-gain models: 80 and 160. They incorporate the gain setting resistors and filter resistors, reducing the number of an

Wide Supply Range, Rail-to-Rail Output Instrumentation Amplifier

GENERAL DESCRIPTION The AD8426 is a dual-channel, low cost, wide supply range instrumentation amplifier that requires only one external resistor to set any gain from 1 to 1000. The AD8426 is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the

Low Noise, Low Gain Drift, G = 2000 Instrumentation Amplifier

GENERAL DESCRIPTION The AD8428 is an ultralow noise instrumentation amplifier designed to accurately measure tiny, high speed signals. It delivers industry-leading gain accuracy, noise, and bandwidth. All gain setting resistors for the AD8428 are internal to the part and are precisely matched. C

Precision Instrumentation Amplifier with Signal Processing Amplifiers

GENERAL DESCRIPTION The AD8295 contains all the components necessary for a precision instrumentation amplifier front end in one small 4 mm × 4 mm package. It contains a high performance instrumentation amplifier, two general-purpose operational amplifiers, and two precisely matched 20 kΩ resistor

Precision Instrumentation Amplifier with Signal Processing Amplifiers

GENERAL DESCRIPTION The AD8295 contains all the components necessary for a precision instrumentation amplifier front end in one small 4 mm × 4 mm package. It contains a high performance instrumentation amplifier, two general-purpose operational amplifiers, and two precisely matched 20 kΩ resistor

Precision Instrumentation Amplifier with Signal Processing Amplifiers

GENERAL DESCRIPTION The AD8295 contains all the components necessary for a precision instrumentation amplifier front end in one small 4 mm × 4 mm package. It contains a high performance instrumentation amplifier, two general-purpose operational amplifiers, and two precisely matched 20 kΩ resistor

Precision Instrumentation Amplifier with Signal Processing Amplifiers

GENERAL DESCRIPTION The AD8295 contains all the components necessary for a precision instrumentation amplifier front end in one small 4 mm × 4 mm package. It contains a high performance instrumentation amplifier, two general-purpose operational amplifiers, and two precisely matched 20 kΩ resistor

Precision Instrumentation Amplifier with Signal Processing Amplifiers

GENERAL DESCRIPTION The AD8295 contains all the components necessary for a precision instrumentation amplifier front end in one small 4 mm × 4 mm package. It contains a high performance instrumentation amplifier, two general-purpose operational amplifiers, and two precisely matched 20 kΩ resistor

Precision Instrumentation Amplifier with Signal Processing Amplifiers

GENERAL DESCRIPTION The AD8295 contains all the components necessary for a precision instrumentation amplifier front end in one small 4 mm × 4 mm package. It contains a high performance instrumentation amplifier, two general-purpose operational amplifiers, and two precisely matched 20 kΩ resistor

Precision Instrumentation Amplifier with Signal Processing Amplifiers

GENERAL DESCRIPTION The AD8295 contains all the components necessary for a precision instrumentation amplifier front end in one small 4 mm × 4 mm package. It contains a high performance instrumentation amplifier, two general-purpose operational amplifiers, and two precisely matched 20 kΩ resistor

High-Speed, Low-Noise Video Op Amp

GENERAL DESCRIPTION The AD829 is a low noise (1.7 nV/√Hz), high speed op amp with custom compensation that provides the user with gains of ±1 to ±20 while maintaining a bandwidth greater than 50 MHz. The AD829’s 0.04° differential phase and 0.02 differential gain performance at 3.58 MHz and 4.43

High Speed, Low Noise Video Op Amp

FEATURES High speed 120 MHz bandwidth, gain = −1 230 V/μs slew rate 90 ns settling time to 0.1% Ideal for video applications 0.02% differential gain 0.04° differential phase Low noise 1.7 nV/√Hz input voltage noise 1.5 pA/√Hz input current noise Excellent dc precision 1 mV maxi

High Speed, Low Noise Video Op Amp

FEATURES High speed 120 MHz bandwidth, gain = −1 230 V/μs slew rate 90 ns settling time to 0.1% Ideal for video applications 0.02% differential gain 0.04° differential phase Low noise 1.7 nV/√Hz input voltage noise 1.5 pA/√Hz input current noise Excellent dc precision 1 mV maxi

High-Speed, Low-Noise Video Op Amp

GENERAL DESCRIPTION The AD829 is a low noise (1.7 nV/√Hz), high speed op amp with custom compensation that provides the user with gains of ±1 to ±20 while maintaining a bandwidth greater than 50 MHz. The AD829’s 0.04° differential phase and 0.02 differential gain performance at 3.58 MHz and 4.43

High Speed, Low Noise Video Op Amp

FEATURES High speed 120 MHz bandwidth, gain = −1 230 V/μs slew rate 90 ns settling time to 0.1% Ideal for video applications 0.02% differential gain 0.04° differential phase Low noise 1.7 nV/√Hz input voltage noise 1.5 pA/√Hz input current noise Excellent dc precision 1 mV maxi

High Speed, Low Noise Video Op Amp

FEATURES High speed 120 MHz bandwidth, gain = −1 230 V/μs slew rate 90 ns settling time to 0.1% Ideal for video applications 0.02% differential gain 0.04° differential phase Low noise 1.7 nV/√Hz input voltage noise 1.5 pA/√Hz input current noise Excellent dc precision 1 mV maxi

High-Speed, Low-Noise Video Op Amp

GENERAL DESCRIPTION The AD829 is a low noise (1.7 nV/√Hz), high speed op amp with custom compensation that provides the user with gains of ±1 to ±20 while maintaining a bandwidth greater than 50 MHz. The AD829’s 0.04° differential phase and 0.02 differential gain performance at 3.58 MHz and 4.43

High-Speed, Low-Noise Video Op Amp

GENERAL DESCRIPTION The AD829 is a low noise (1.7 nV/√Hz), high speed op amp with custom compensation that provides the user with gains of ±1 to ±20 while maintaining a bandwidth greater than 50 MHz. The AD829’s 0.04° differential phase and 0.02 differential gain performance at 3.58 MHz and 4.43

High Speed, Low Noise Video Op Amp

FEATURES High speed 120 MHz bandwidth, gain = −1 230 V/μs slew rate 90 ns settling time to 0.1% Ideal for video applications 0.02% differential gain 0.04° differential phase Low noise 1.7 nV/√Hz input voltage noise 1.5 pA/√Hz input current noise Excellent dc precision 1 mV maxi

High Speed, Low Noise Video Op Amp

FEATURES High speed 120 MHz bandwidth, gain = −1 230 V/μs slew rate 90 ns settling time to 0.1% Ideal for video applications 0.02% differential gain 0.04° differential phase Low noise 1.7 nV/√Hz input voltage noise 1.5 pA/√Hz input current noise Excellent dc precision 1 mV maxi

High Speed, Low Noise Video Op Amp

FEATURES High speed 120 MHz bandwidth, gain = −1 230 V/μs slew rate 90 ns settling time to 0.1% Ideal for video applications 0.02% differential gain 0.04° differential phase Low noise 1.7 nV/√Hz input voltage noise 1.5 pA/√Hz input current noise Excellent dc precision 1 mV maxi

High Speed, Low Noise Video Op Amp

FEATURES High speed 120 MHz bandwidth, gain = −1 230 V/μs slew rate 90 ns settling time to 0.1% Ideal for video applications 0.02% differential gain 0.04° differential phase Low noise 1.7 nV/√Hz input voltage noise 1.5 pA/√Hz input current noise Excellent dc precision 1 mV maxi

High Speed, Low Noise Video Op Amp

FEATURES High speed 120 MHz bandwidth, gain = −1 230 V/μs slew rate 90 ns settling time to 0.1% Ideal for video applications 0.02% differential gain 0.04° differential phase Low noise 1.7 nV/√Hz input voltage noise 1.5 pA/√Hz input current noise Excellent dc precision 1 mV maxi

High-Speed, Low-Noise Video Op Amp

GENERAL DESCRIPTION The AD829 is a low noise (1.7 nV/√Hz), high speed op amp with custom compensation that provides the user with gains of ±1 to ±20 while maintaining a bandwidth greater than 50 MHz. The AD829’s 0.04° differential phase and 0.02 differential gain performance at 3.58 MHz and 4.43

High-Speed, Low-Noise Video Op Amp

GENERAL DESCRIPTION The AD829 is a low noise (1.7 nV/√Hz), high speed op amp with custom compensation that provides the user with gains of ±1 to ±20 while maintaining a bandwidth greater than 50 MHz. The AD829’s 0.04° differential phase and 0.02 differential gain performance at 3.58 MHz and 4.43

High Speed, Low Noise Video Op Amp

FEATURES High speed 120 MHz bandwidth, gain = −1 230 V/μs slew rate 90 ns settling time to 0.1% Ideal for video applications 0.02% differential gain 0.04° differential phase Low noise 1.7 nV/√Hz input voltage noise 1.5 pA/√Hz input current noise Excellent dc precision 1 mV maxi

High Speed, Low Noise Video Op Amp

FEATURES High speed 120 MHz bandwidth, gain = −1 230 V/μs slew rate 90 ns settling time to 0.1% Ideal for video applications 0.02% differential gain 0.04° differential phase Low noise 1.7 nV/√Hz input voltage noise 1.5 pA/√Hz input current noise Excellent dc precision 1 mV maxi

High Speed, Low Noise Video Op Amp

GENERAL DESCRIPTION The AD829 is a low noise (1.7 nV/√Hz), high speed op amp with custom compensation that provides the user with gains of 1 to 20 while maintaining a bandwidth >50 MHz. Its 0.04° differential phase and 0.02 differential gain performance at 3.58 MHz and 4.43 MHz, driving reverse-t

High Speed, Low Noise Video Op Amp

FEATURES High speed 120 MHz bandwidth, gain = −1 230 V/μs slew rate 90 ns settling time to 0.1% Ideal for video applications 0.02% differential gain 0.04° differential phase Low noise 1.7 nV/√Hz input voltage noise 1.5 pA/√Hz input current noise Excellent dc precision 1 mV maxi

High-Speed, Low-Noise Video Op Amp

GENERAL DESCRIPTION The AD829 is a low noise (1.7 nV/√Hz), high speed op amp with custom compensation that provides the user with gains of ±1 to ±20 while maintaining a bandwidth greater than 50 MHz. The AD829’s 0.04° differential phase and 0.02 differential gain performance at 3.58 MHz and 4.43