Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

GENERAL DESCRIPTION The AD823 is a dual precision, 16 MHz, JFET input op amp that can operate from a single supply of 3.0 V to 36 V or from dual supplies of ±1.5 V to ±18 V. It has true single-supply capability with an input voltage range extending below ground in single-supply mode. Output volta

Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 500 pF, G = +1 Output current of 15 mA, 0.5 V from supplies Excellent ac performance on 2.6 mA/amplifier

双通道、16 MHz、轨到轨FET输入放大器

AD823是一款双通道、精密、16 MHz、JFET输入运算放大器，可采用3.0 V至36 V单电源或±1.5 V至±18 V双电源供电。它具有单电源供电能力，在单电源模式下输入电压范围可扩展至地电压以下。IOUT ≤ 100 µA时，输出电压摆幅可扩展至各供电轨50 mV以内，从而可提供出色的输出动态范围。 \n\n 直流精度性能包括最大800 μV的失调电压、2 μV/°C的失调电压漂移、小于25 pA的输入偏置电流以及低输入电压噪声，源阻抗最高可达1 GΩ。该器件提供16 MHz、−3 dB带宽、−108 dB THD (20 kHz)、22 V/μs压摆率和每个放大器2.6 • 单电源供电\n轨到轨输出摆幅\n输入电压范围扩大到地电位以下\n单电源供电能力：3 V至36 V\n\n• 高负载驱动\n容性负载驱动：500 pF(G = +1)\n输出电流：15 mA（与电源相差0.5 V时）\n\n• 低失真：−108 dBc（最差谐波，20 kHz）\n\n• 低噪声：16nV/√Hz(10 kHz)\n\n• 出色的直流性能\n输入失调电压：800 μV（最大值）\n失调电压漂移：2 μV/°C\n输入偏置电流：25 pA（最大值）\n\n• 出色的交流性能：每个放大器2.6 mA\n−3 dB带宽：16 MHz (G = +1)\n0.01%建立时间：;

MicroConverter짰 12-Bit ADCs and DACs with Embedded High Speed 62-kB Flash MCU

文件：908.68 Kbytes Page：88 Pages

Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

文件：465.86 Kbytes Page：20 Pages

Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 500 pF, G = +1 Output current of 15 mA, 0.5 V from supplies Excellent ac performance on 2.6 mA/amplifier

16 V Rail-to-Rail, Zero-Drift, Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8230 is a low drift, differential sampling, precision instrumentation amplifier. Auto-zeroing reduces offset voltage drift to less than 50 nV/°C. The AD8230 is well-suited for thermocouple and bridge transducer applications. The AD8230’s high CMR of 110 dB (minimum) reje

16 V Rail-to-Rail, Zero-Drift, Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8230 is a low drift, differential sampling, precision instrumentation amplifier. Auto-zeroing reduces offset voltage drift to less than 50 nV/°C. The AD8230 is well-suited for thermocouple and bridge transducer applications. The AD8230’s high CMR of 110 dB (minimum) reje

16 V Rail-to-Rail, Zero-Drift, Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8230 is a low drift, differential sampling, precision instrumentation amplifier. Auto-zeroing reduces offset voltage drift to less than 50 nV/°C. The AD8230 is well-suited for thermocouple and bridge transducer applications. The AD8230’s high CMR of 110 dB (minimum) reje

16 V Rail-to-Rail, Zero-Drift, Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8230 is a low drift, differential sampling, precision instrumentation amplifier. Auto-zeroing reduces offset voltage drift to less than 50 nV/°C. The AD8230 is well-suited for thermocouple and bridge transducer applications. The AD8230’s high CMR of 110 dB (minimum) reje

16 V Rail-to-Rail, Zero-Drift, Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8230 is a low drift, differential sampling, precision instrumentation amplifier. Auto-zeroing reduces offset voltage drift to less than 50 nV/°C. The AD8230 is well-suited for thermocouple and bridge transducer applications. The AD8230’s high CMR of 110 dB (minimum) reje

Zero Drift, Digitally Programmable Instrumentation Amplifier

GENERAL DESCRIPTION The AD8253 is an instrumentation amplifier with digitally programmable gains that has GΩ input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidt

Wide Supply Range, Rail-to-Rail Output Instrumentation Amplifier

GENERAL DESCRIPTION The AD8426 is a dual-channel, low cost, wide supply range instrumentation amplifier that requires only one external resistor to set any gain from 1 to 1000. The AD8426 is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the

Low Noise, Low Gain Drift, G = 2000 Instrumentation Amplifier

GENERAL DESCRIPTION The AD8428 is an ultralow noise instrumentation amplifier designed to accurately measure tiny, high speed signals. It delivers industry-leading gain accuracy, noise, and bandwidth. All gain setting resistors for the AD8428 are internal to the part and are precisely matched. C

零漂移、数字式可编程仪表放大器

AD8231是一款低漂移、轨到轨仪表放大器，具有软件可编程增益1、2、4、8、16、32、64、128。可通过数字逻辑或引脚搭接进行增益编程。\n\n AD8231特别适合要求在宽温度范围内具有高精度性能的应用，如工业温度检测和数据记录等。增益设置电阻位于内部，因此对于1至32的增益，最大增益漂移仅为10 ppm/°C。因为采用自稳零输入级，所以最大输入失调为15 μV，而最大输入失调漂移仅为50 nV/°C。共模抑制比(CMRR)在G = 1时为80 dB，并随增益提高而增加，最高为110 dB。\n\n AD8231还内置一个非专用运算放大器，可以用来提供附加增益、差分 • 数字/引脚可编程增益 \n• G = 1、2、4、8、16、32、64或128\n \n\n \n \n• 额定温度范围：−40°C至+125°C \n• 输入失调漂移：50 nV/°C（最大值）\n\n• 最大增益漂移：10 ppm/°C\n \n\n \n \n• 出色的直流性能 \n• CMR：80 dB（最小值，G = 1）\n\n• 输入失调电压：15 µV（最大值）\n\n• 偏置电流：500 pA（最大值）\n\n• 噪声：0.7 μV p-p（0.1 Hz至10 Hz）\n \n\n \n \n• 欲了解更多特性，请参考数据手册\n\n\nAD8231-EP支持防务和航空航;

10 MHz, 20 V/關s, G = 1, 10, 100, 1000 i CMOS짰 Programmable Gain Instrumentation Amplifier

GENERAL DESCRIPTION The AD8253 is an instrumentation amplifier with digitally programmable gains that has GΩ input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidt

Zero Drift, Digitally Programmable Instrumentation Amplifier

GENERAL DESCRIPTION The AD8253 is an instrumentation amplifier with digitally programmable gains that has GΩ input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidt

Zero Drift, Digitally Programmable Instrumentation Amplifier

GENERAL DESCRIPTION The AD8253 is an instrumentation amplifier with digitally programmable gains that has GΩ input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidt

Zero Drift, Digitally Programmable Instrumentation Amplifier

GENERAL DESCRIPTION The AD8253 is an instrumentation amplifier with digitally programmable gains that has GΩ input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidt

单导联心率监护模拟前端

AD8232是一款用于ECG及其他生物电测量应用的集成信号调理模块。 该器件设计用于在具有运动或远程电极放置产生的噪声的情况下提取、放大及过滤微弱的生物电信号。 该设计使得超低功耗模数转换器(ADC)或嵌入式微控制器能够轻松地采集输出信号。 \n\n AD8232采用双极点高通滤波器来消除运动伪像和电极半电池电位。 该滤波器与仪表放大器结构紧密耦合，可实现单级高增益及高通滤波，从而节约了空间和成本。 \n\n AD8232采用一个无使用约束运算放大器来创建一个三极点低通滤波器，消除了额外的噪声。 用户可以通过选择滤波器的截止频率来满足不同类型应用的需要。 \n\n • 全集成式单导联ECG前端 \n\n• 低供电电流：170 μA（典型值）\n\n• 共模抑制比：80 dB（DC至60 Hz）\n\n• 两个或三个电极配置\n\n• 高信号增益(G = 100)，带DC阻塞能力\n\n• 2极点可调高通滤波器\n\n• 接受高达±300 mV的半电池电位\n\n• 快速恢复功能减少了滤波器的建立时间\n\n• 无使用约束运算放大器\n\n• 3极点可调低通滤波器，带可调增益;

Single-Lead, Heart Rate Monitor Front End

GENERAL DESCRIPTION The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode p

Single-Lead, Heart Rate Monitor Front End

GENERAL DESCRIPTION The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode p

Single-Lead, Heart Rate Monitor Front End

GENERAL DESCRIPTION The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode p

Single-Lead, Heart Rate Monitor Front End

GENERAL DESCRIPTION The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode p

Single-Lead, Heart Rate Monitor Front End

GENERAL DESCRIPTION The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode p

Single-Lead, Heart Rate Monitor Front End

GENERAL DESCRIPTION The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode p

Single-Lead, Heart Rate Monitor Front End

GENERAL DESCRIPTION The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode p

Single-Lead, Heart Rate Monitor Front End

GENERAL DESCRIPTION The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode p

Single-Lead, Heart Rate Monitor Front End

GENERAL DESCRIPTION The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode p

Single-Lead, Heart Rate Monitor Front End

GENERAL DESCRIPTION The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode p

Single-Lead, Heart Rate Monitor Front End

GENERAL DESCRIPTION The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode p

40 關A Micropower Instrumentation Amplifier in WLCSP Package

GENERAL DESCRIPTION The AD8235 is the smallest and lowest power instrumentation amplifier in the industry. It is available in a 1.5 mm × 2.2 mm wafer level chip scale package (WLCSP). The AD8235 draws a maximum quiescent current of 40 μA. In addition, it draws a maximum 500 nA of current during s

Low Noise, Low Gain Drift, G = 2000 Instrumentation Amplifier

GENERAL DESCRIPTION The AD8428 is an ultralow noise instrumentation amplifier designed to accurately measure tiny, high speed signals. It delivers industry-leading gain accuracy, noise, and bandwidth. All gain setting resistors for the AD8428 are internal to the part and are precisely matched. C

40 關A Micropower Instrumentation Amplifier in WLCSP Package

GENERAL DESCRIPTION The AD8235 is the smallest and lowest power instrumentation amplifier in the industry. It is available in a 1.5 mm × 2.2 mm wafer level chip scale package (WLCSP). The AD8235 draws a maximum quiescent current of 40 μA. In addition, it draws a maximum 500 nA of current during s

Low Noise, Low Gain Drift, G = 2000 Instrumentation Amplifier

GENERAL DESCRIPTION The AD8428 is an ultralow noise instrumentation amplifier designed to accurately measure tiny, high speed signals. It delivers industry-leading gain accuracy, noise, and bandwidth. All gain setting resistors for the AD8428 are internal to the part and are precisely matched. C

40 關A Micropower Instrumentation Amplifier with Zero Crossover Distortion

GENERAL DESCRIPTION The AD8236 is the lowest power instrumentation amplifier in the industry. It has rail-to-rail outputs and can operate on voltages as low as 1.8 V. Its 40 μA maximum supply current makes it an excellent choice in battery-powered applications. The AD8236’s high input impedance,

40 關A Micropower Instrumentation Amplifier with Zero Crossover Distortion

GENERAL DESCRIPTION The AD8236 is the lowest power instrumentation amplifier in the industry. It has rail-to-rail outputs and can operate on voltages as low as 1.8 V. Its 40 μA maximum supply current makes it an excellent choice in battery-powered applications. The AD8236’s high input impedance,

40 關A Micropower Instrumentation Amplifier with Zero Crossover Distortion

GENERAL DESCRIPTION The AD8236 is the lowest power instrumentation amplifier in the industry. It has rail-to-rail outputs and can operate on voltages as low as 1.8 V. Its 40 μA maximum supply current makes it an excellent choice in battery-powered applications. The AD8236’s high input impedance,

40 關A Micropower Instrumentation Amplifier with Zero Crossover Distortion

GENERAL DESCRIPTION The AD8236 is the lowest power instrumentation amplifier in the industry. It has rail-to-rail outputs and can operate on voltages as low as 1.8 V. Its 40 μA maximum supply current makes it an excellent choice in battery-powered applications. The AD8236’s high input impedance,

40 關A Micropower Instrumentation Amplifier with Zero Crossover Distortion

GENERAL DESCRIPTION The AD8236 is the lowest power instrumentation amplifier in the industry. It has rail-to-rail outputs and can operate on voltages as low as 1.8 V. Its 40 μA maximum supply current makes it an excellent choice in battery-powered applications. The AD8236’s high input impedance,

Micropower, Zero Drift, True Rail-to-Rail Instrumentation Amplifier

GENERAL DESCRIPTION The AD8237 is a micropower, zero drift, rail-to-rail input and output instrumentation amplifier. The relative match of two resistors sets any gain from 1 to 1000. The AD8237 has excellent gain accuracy performance that can be preserved at any gain with two ratio-matched resi

Micropower, Zero Drift, True Rail-to-Rail Instrumentation Amplifier

GENERAL DESCRIPTION The AD8237 is a micropower, zero drift, rail-to-rail input and output instrumentation amplifier. The relative match of two resistors sets any gain from 1 to 1000. The AD8237 has excellent gain accuracy performance that can be preserved at any gain with two ratio-matched resi

Micropower, Zero Drift, True Rail-to-Rail Instrumentation Amplifier

GENERAL DESCRIPTION The AD8237 is a micropower, zero drift, rail-to-rail input and output instrumentation amplifier. The relative match of two resistors sets any gain from 1 to 1000. The AD8237 has excellent gain accuracy performance that can be preserved at any gain with two ratio-matched resi

Micropower, Zero Drift, True Rail-to-Rail Instrumentation Amplifier

GENERAL DESCRIPTION The AD8237 is a micropower, zero drift, rail-to-rail input and output instrumentation amplifier. The relative match of two resistors sets any gain from 1 to 1000. The AD8237 has excellent gain accuracy performance that can be preserved at any gain with two ratio-matched resi

Wide Supply Dual, 17 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 470 pF (G = +1, 25% overshoot) Linear output current of 40 mA, 0.5 V from supplies Excellent ac performance

Wide Supply Dual, 17 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 470 pF (G = +1, 25% overshoot) Linear output current of 40 mA, 0.5 V from supplies Excellent ac performance

Wide Supply Dual, 17 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 470 pF (G = +1, 25% overshoot) Linear output current of 40 mA, 0.5 V from supplies Excellent ac performance

Wide Supply Dual, 17 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 470 pF (G = +1, 25% overshoot) Linear output current of 40 mA, 0.5 V from supplies Excellent ac performance

Wide Supply Dual, 17 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 470 pF (G = +1, 25% overshoot) Linear output current of 40 mA, 0.5 V from supplies Excellent ac performance

Wide Supply Dual, 17 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 470 pF (G = +1, 25% overshoot) Linear output current of 40 mA, 0.5 V from supplies Excellent ac performance

Wide Supply Dual, 17 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 470 pF (G = +1, 25% overshoot) Linear output current of 40 mA, 0.5 V from supplies Excellent ac performance

Wide Supply Dual, 17 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 470 pF (G = +1, 25% overshoot) Linear output current of 40 mA, 0.5 V from supplies Excellent ac performance

Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

GENERAL DESCRIPTION The AD823 is a dual precision, 16 MHz, JFET input op amp that can operate from a single supply of 3.0 V to 36 V or from dual supplies of ±1.5 V to ±18 V. It has true single-supply capability with an input voltage range extending below ground in single-supply mode. Output volta

Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 500 pF, G = +1 Output current of 15 mA, 0.5 V from supplies Excellent ac performance on 2.6 mA/amplifier

Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 500 pF, G = +1 Output current of 15 mA, 0.5 V from supplies Excellent ac performance on 2.6 mA/amplifier

Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

GENERAL DESCRIPTION The AD823 is a dual precision, 16 MHz, JFET input op amp that can operate from a single supply of 3.0 V to 36 V or from dual supplies of ±1.5 V to ±18 V. It has true single-supply capability with an input voltage range extending below ground in single-supply mode. Output volta

Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 500 pF, G = +1 Output current of 15 mA, 0.5 V from supplies Excellent ac performance on 2.6 mA/amplifier

Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 500 pF, G = +1 Output current of 15 mA, 0.5 V from supplies Excellent ac performance on 2.6 mA/amplifier

Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

GENERAL DESCRIPTION The AD823 is a dual precision, 16 MHz, JFET input op amp that can operate from a single supply of 3.0 V to 36 V or from dual supplies of ±1.5 V to ±18 V. It has true single-supply capability with an input voltage range extending below ground in single-supply mode. Output volta

Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 500 pF, G = +1 Output current of 15 mA, 0.5 V from supplies Excellent ac performance on 2.6 mA/amplifier