Single-Supply 42 V System Difference Amplifier

GENERAL DESCRIPTION The AD8206 is a single-supply difference amplifier for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −2 V to +65 V. The typical single-supply voltage is 5 V. The AD8206 is offer

Precision, Dual-Channel Difference Amplifier

GENERAL DESCRIPTION The AD8270 is a low distortion, dual-channel amplifier with internal gain setting resistors. With no external components, it can be configured as a high performance difference amplifier with gains of 0.5, 1, or 2. It can also be configured in over 40 singleended configurations

Dual-Channel Audio Difference Amplifier

GENERAL DESCRIPTION The AD8273 is a low distortion, dual-channel amplifier with internal gain setting resistors. With no external components, it can be configured as a high performance difference amplifier (G = ½ or 2), inverting amplifier (G = ½ or 2), or noninverting amplifier (G = 1½ or 3). Th

Single-Supply, 42 V System Difference Amplifier

GENERAL DESCRIPTION The AD8206 is a single-supply difference amplifier for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −2 V to +65 V. The typical single supply voltage is 5 V. The AD8206 is offer

Bidirectional, Zero Drift, Current Sense Amplifier

GENERAL DESCRIPTION The AD8417 is a high voltage, high resolution current shunt amplifier. It features an initial gain of 60 V/V, with a maximum ±0.3 gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. The AD8417 offers excelle

Low Power, Wide Supply Range, Low Cost Difference Amplifiers,

GENERAL DESCRIPTION The AD8278 and AD8279 are general-purpose difference amplifiers intended for precision signal conditioning in power critical applications that require both high performance and low power. The AD8278 and AD8279 provide exceptional commonmode rejection ratio (80 dB) and high ban

Bidirectional, Zero Drift, Current Sense Amplifier

GENERAL DESCRIPTION The AD8417-2 is a high-voltage, high-resolution dual-channel current shunt amplifier. It features an initial gain of 60 V/V and performs bidirectional current measurements across a shunt resistor in a variety of automotive and industrial applications, including motor contr

单电源42V系统差分放大器

AD8206是一款单电源差动放大器，适合在存在大共模电压的情况下放大小差分电压。输入共模电压范围为-2 V至+65 V。典型单电源电压为5 V。\n\n AD8206采用8引脚SOIC封装，额定温度范围为−40°C至+125°C的汽车温度范围。\n\n 相对于温度的出色直流性能使测量环路误差保持最小。失调漂移典型值小于15 µV/°C，增益漂移典型值低于30 ppm/°C。\n\n 利用5 V电源和VREF1和VREF2引脚，输出失调可在0.08 V至4.7 V范围内调整。当VREF1与V+引脚相连，VREF2与GND引脚相连时，输出设置为半量程。将两个基准引脚与 • 电流检测应用的理想选择\n\n• 高共模电压范围：\n正常工作范围：-2 V至+65 V \n极限值范围：-25 V至+75 V\n\n• 增益 = 20\n\n• 扩展的工作温度范围 \n8引脚SOIC：-40°C至+125°C\n\n• 双向操作应用\n\n• 出色的交流与直流性能\n失调漂移：15 µV/°C\n增益漂移：±30 ppm/°C\nCMRR：80 dB（直流至20 kHz）\n\n• 符合汽车应用的要求。;

Bidirectional, Zero Drift, Current Sense Amplifier

文件：300.63 Kbytes Page：16 Pages

Very Low Distortion, Precision Difference Amplifier

文件：375.09 Kbytes Page：16 Pages

G = 0.2, Level Translation, 16-Bit ADC Driver

文件：398.71 Kbytes Page：16 Pages

Precision Dual-Channel, Difference Amplifier

文件：605.58 Kbytes Page：20 Pages

Programmable Gain Precision Difference Amplifier

文件：381.07 Kbytes Page：20 Pages

Very Low Distortion, Dual-Channel, High Precision Difference Amplifier

文件：329.74 Kbytes Page：16 Pages

High Common-Mode Voltage, Bidirectional Current Shunt Amplifier

文件：466.5 Kbytes Page：16 Pages

High Voltage, High Bandwidth Current Sense Amplifier

文件：4.07917 Mbytes Page：4 Pages

Single-Supply, 42 V System Difference Amplifier

GENERAL DESCRIPTION The AD8206 is a single-supply difference amplifier for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −2 V to +65 V. The typical single supply voltage is 5 V. The AD8206 is offer

Single-Supply, 42 V System Difference Amplifier

GENERAL DESCRIPTION The AD8206 is a single-supply difference amplifier for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −2 V to +65 V. The typical single supply voltage is 5 V. The AD8206 is offer

Single-Supply 42 V System Difference Amplifier

GENERAL DESCRIPTION The AD8206 is a single-supply difference amplifier for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −2 V to +65 V. The typical single-supply voltage is 5 V. The AD8206 is offer

Single-Supply 42 V System Difference Amplifier

GENERAL DESCRIPTION The AD8206 is a single-supply difference amplifier for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −2 V to +65 V. The typical single-supply voltage is 5 V. The AD8206 is offer

Single-Supply 42 V System Difference Amplifier

GENERAL DESCRIPTION The AD8206 is a single-supply difference amplifier for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −2 V to +65 V. The typical single-supply voltage is 5 V. The AD8206 is offer

Single-Supply 42 V System Difference Amplifier

GENERAL DESCRIPTION The AD8206 is a single-supply difference amplifier for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −2 V to +65 V. The typical single-supply voltage is 5 V. The AD8206 is offer

Single-Supply, 42 V System Difference Amplifier

GENERAL DESCRIPTION The AD8206 is a single-supply difference amplifier for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −2 V to +65 V. The typical single supply voltage is 5 V. The AD8206 is offer

Single-Supply, 42 V System Difference Amplifier

GENERAL DESCRIPTION The AD8206 is a single-supply difference amplifier for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −2 V to +65 V. The typical single supply voltage is 5 V. The AD8206 is offer

Single-Supply, 42 V System Difference Amplifier

GENERAL DESCRIPTION The AD8206 is a single-supply difference amplifier for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −2 V to +65 V. The typical single supply voltage is 5 V. The AD8206 is offer

High Common-Mode Voltage, Bidirectional Current Shunt Amplifier

文件：466.5 Kbytes Page：16 Pages

High Common-Mode Voltage, Bidirectional Current Shunt Amplifier

文件：361.38 Kbytes Page：13 Pages

High Common-Mode Voltage, Bidirectional Current Shunt Amplifier

文件：466.5 Kbytes Page：16 Pages

High Common-Mode Voltage, Bidirectional Current Shunt Amplifier

文件：466.5 Kbytes Page：16 Pages

High Common-Mode Voltage, Bidirectional Current Shunt Amplifier

文件：466.5 Kbytes Page：16 Pages

High Common-Mode Voltage, Bidirectional Current Shunt Amplifier

文件：466.5 Kbytes Page：16 Pages

High Common-Mode Voltage, Bidirectional Current Shunt Amplifier

文件：466.5 Kbytes Page：16 Pages

High Common-Mode Voltage, Bidirectional Current Shunt Amplifier

文件：466.5 Kbytes Page：16 Pages

High Common-Mode Voltage, Bidirectional Current Shunt Amplifier

文件：466.5 Kbytes Page：16 Pages

High Common-Mode Voltage, Bidirectional Current Shunt Amplifier

文件：466.5 Kbytes Page：16 Pages

Tone ringer IC for telephone set

The BA8206 and BA8206F are tone ringer ICs which produce a bell sound from a ringing signal. The frequency of the bell sound can be varied by changing the constants of the external resistance and capacitors. The operation initiation current dissipation can be changed at the RSL pin. Also, the outp

Tone ringer IC for telephone set

The BA8206 and BA8206F are tone ringer ICs which produce a bell sound from a ringing signal. The frequency of the bell sound can be varied by changing the constants of the external resistance and capacitors. The operation initiation current dissipation can be changed at the RSL pin. Also, the outp

Ultra fast high-voltage soft-recovery controlled avalanche rectifiers

DESCRIPTION Plastic package, using glass passivation and a high temperature alloyed construction. This package is hermetically sealed and fatigue free as coefficients of expansion of all used parts are matched. The package should be used in an insulating medium such as resin, oil or SF6 gas.

6-Pin DIP Optoisolators High Voltage Transistor Output(400 Volts)

The MOC8204, MOC8205 and MOC8206 devices consist of gallium arsenide infrared emitting diodes optically coupled to high voltage, silicon, phototransis tor detectors in a standard 6–pin DIP package. They are designed for high voltage applications and are particularly useful in copy machines and sol

New Application of Rem ote Fan Controller BA8206 BA4

文件：124.17 Kbytes Page：4 Pages