2:1 HDMI/DVI Switch with Equalization

GENERAL DESCRIPTION The AD8196 is an HDMI/DVI switch featuring equalized TMDS inputs and pre-emphasized TMDS outputs, ideal for systems with long cable runs. Outputs can be set to a high impedance state to reduce the power dissipation and/or allow the construction of larger arrays using the wir

具有均衡特性的2:1 HDMI/DVI开关

AD8196是一款HDMI™/DVI开关，具有均衡TMDS®输入和预加重TMDS输出，非常适合配置较长电缆的系统。输出可以设置为高阻抗状态，以降低功耗，并且/或者利用线“或”技术构建较大的阵列。 \n\nAD8196提供节省空间的56引脚LFCSP表贴无铅塑封封装，额定工作温度范围为−40°C至+85°C。 \n\n产品聚焦\n\n• 支持最高达2.25 Gbps的数据速率，可实现1080p深色（12位色彩）以上的HDMI格式及UXGA (1600 × 1200)以上的DVI分辨率。\n\n• 输入电缆均衡器支持输入端使用较长的电缆（2.25 Gbps时支持20米以上的24 AWG电缆）。\n • 2路输入、1路输出HDMI™/DVI链路\n\n• 支持HDMI 1.3兼容型接收机 \n\n• 与AD8190引脚兼容 \n\n• 每链路4个TMDS™通道\n支持250 Mbps至2.25 Gbps数据速率\n支持25 MHz至225 MHz像素时钟\n均衡输入支持使用HDMI长电缆（20米、2.25 Gbps）\n完全缓冲的单向输入/输出 \n\n• 可开关控制的通用50 Ω片内端接电阻\n预加重输出\n低附加抖动\n单电源供电(3.3 V)\n\n\n\n• 每链路4个辅助通道\n双向无缓冲输入/输出\n灵活的电源电压（3.3 V至5 V）\n兼容HDCP标准\n支持切换DDC总线;

2:1 HDMI/DVI Switch with Equalization

文件：709.45 Kbytes Page：24 Pages

2:1 HDMI/DVI Switch with Equalization

GENERAL DESCRIPTION The AD8196 is an HDMI/DVI switch featuring equalized TMDS inputs and pre-emphasized TMDS outputs, ideal for systems with long cable runs. Outputs can be set to a high impedance state to reduce the power dissipation and/or allow the construction of larger arrays using the wir

2:1 HDMI/DVI Switch with Equalization

GENERAL DESCRIPTION The AD8196 is an HDMI/DVI switch featuring equalized TMDS inputs and pre-emphasized TMDS outputs, ideal for systems with long cable runs. Outputs can be set to a high impedance state to reduce the power dissipation and/or allow the construction of larger arrays using the wir

2:1 HDMI/DVI Switch with Equalization

GENERAL DESCRIPTION The AD8196 is an HDMI/DVI switch featuring equalized TMDS inputs and pre-emphasized TMDS outputs, ideal for systems with long cable runs. Outputs can be set to a high impedance state to reduce the power dissipation and/or allow the construction of larger arrays using the wir

2:1 HDMI/DVI Switch with Equalization

GENERAL DESCRIPTION The AD8196 is an HDMI/DVI switch featuring equalized TMDS inputs and pre-emphasized TMDS outputs, ideal for systems with long cable runs. Outputs can be set to a high impedance state to reduce the power dissipation and/or allow the construction of larger arrays using the wir

2:1 HDMI/DVI Switch with Equalization

文件：709.45 Kbytes Page：24 Pages

封装/外壳：56-VFQFN 裸露焊盘，CSP 包装：卷带（TR） 描述：IC HDMI/DVI SWITCH 56LFCSP 集成电路（IC） 专用 IC

封装/外壳：56-VFQFN 裸露焊盘，CSP 包装：卷带（TR） 描述：IC HDMI/DVI SWITCH 56LFCSP 集成电路（IC） 专用 IC

RSM8196

[Nissatsu Microelectronics] Overview RSM8196 is a single-chip IC used for dual-channel remote control car reception. It has two channels CH1 and CH2 for control To control the left and right, forward and backward movement of the remote control car, equipped with a 27MHz crystal resonator, freque

AUDIO SWITCH AND DC VOLUME CONTROLFOR TV

DESCRIPTION The TDA8196 is a monolithic integrated circuit in DIP8 package intended for TV applications. ■ TWO AUDIO INPUTS WITH SWITCHING FACILITIES FULLY COMPATIBLE WITH THE SCART EUROPEAN NORM EN 50049 ■ DC VOLUME CONTROL

(88)BIT OUTPUT 16-BIT CIS/CCD AFE/DIGITISER

DESCRIPTION The WM8196 is a 16-bit analogue front end/digitiser IC which processes and digitises the analogue output signals from CCD sensors or Contact Image Sensors (CIS) at pixel sample rates of up to 12MSPS. FEATURES • 16-bit ADC • 12MSPS conversion rate • Low power – 320mW typical • 5V