33 x 17, 1.5 Gbps Digital Crosspoint Switch

GENERAL DESCRIPTION AD8150 is a member of the Xstream line of products and is a breakthrough in digital switching, offering a large switch array (33 × 17) on very little power, typically less than 1.5 W. Additionally, it operates at data rates in excess of 1.5 Gbps per port, making it suitable fo

1.5 Gb/s、33 x 17数字交叉点开关

AD8150 属于Xstream 系列产品，采用突破性数字开关技术，可提供较大的开关阵列(33 x 17)，功耗极低，典型功耗小于1.5 W。此外，它能以每端口1.5 Gbps以上的数据速率工作，适合高清电视应用。而且价格实惠，也适合标清应用，还适用于OC-24光纤网络切换。\n\n AD8150提供灵活的电源，因此用户能以PECL或ECL数据电平工作，电源电压甚至可低至3.3 V，从而进一步降低功耗。控制接口为CMOS/TTL兼容型（3 V至5 V）。\n\n 完全差分信号路径不仅可降低抖动和串扰，而且允许使用较小的单端电压摆幅。\n\n AD8150采用184 • 低成本\n• 33 x 17、完全差分、非阻塞式阵列\n• 每个端口的NRZ数据速率大于1.5 Gbps\n• 宽电源电压范围：+5 V、+3.3 V、-3.3 V、-5 V\n• 低功耗\n400 mA（输出使能）\n30 mA（输出禁用）\n• 与PECL和ECL兼容\n• CMOS/TTL电平控制输入：3 V至5 V\n• 低抖动：小于50 ps峰峰值\n• 无需散热器\n• 可编程输出电流\n优化端接阻抗\n用户控制的负载端电压\n可使功耗最低\n• 独立输出禁用，可以通过总线连接并构建\n• 更大的阵列;

33 x 17, 1.5 Gbps Digital Crosspoint Switch

GENERAL DESCRIPTION AD8150 is a member of the Xstream line of products and is a breakthrough in digital switching, offering a large switch array (33 × 17) on very little power, typically less than 1.5 W. Additionally, it operates at data rates in excess of 1.5 Gbps per port, making it suitable fo

33 x 17, 1.5 Gbps Digital Crosspoint Switch

GENERAL DESCRIPTION AD8150 is a member of the Xstream line of products and is a breakthrough in digital switching, offering a large switch array (33 × 17) on very little power, typically less than 1.5 W. Additionally, it operates at data rates in excess of 1.5 Gbps per port, making it suitable fo

Crosspoint Switch

文件：756.38 Kbytes Page：44 Pages

封装/外壳：184-LQFP 包装：卷带（TR） 描述：IC CROSSPOINT SW 1X33:17 184LQFP 集成电路（IC） 信号开关，多路复用器，解码器

Silicon planar type

Silicon planar type For stabilization of power supply ■Features •Extremely low noise voltage caused from the diode (2.4V to 39V, 1/3 to 1/10 of our conventional MAZ3000 series) •Extremely good rising performance (in the low-current range) •Easy-to-select the optimum diode because

Vertical Driver LSI for Video Camera CCD Area Image Sensor

Overview The MN3111H is a vertical driver LSI for a two-dimensional interline CCD image sensor. It features a built-in power supply circuit that, in conjunction with such external components as four booster capacitors, six voltage stabilization capacitors, eight Schottky barrier diodes, and two Z

Silicon planar type

Silicon planar type For stabilization of power supply ■Features •Extremely low noise voltage caused from the diode (2.4V to 39V, 1/3 to 1/10 of our conventional MAZ3000 series) •Extremely good rising performance (in the low-current range) •Easy-to-select the optimum diode because

Silicon planar type

Silicon planar type For stabilization of power supply ■Features •Extremely low noise voltage caused from the diode (2.4V to 39V, 1/3 to 1/10 of our conventional MAZ3000 series) •Extremely good rising performance (in the low-current range) •Easy-to-select the optimum diode because

Silicon planar type

Silicon planar type For stabilization of power supply ■Features •Extremely low noise voltage caused from the diode (2.4V to 39V, 1/3 to 1/10 of our conventional MAZ3000 series) •Extremely good rising performance (in the low-current range) •Easy-to-select the optimum diode because